Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-06-29 00:53:08
From: Nishi
Description: ThinkCentre M72e running NetBSD/amd64 10.0_BETA
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.0_BETA (GENERIC) #0: Mon Jan 23 16:02:49 UTC 2023
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 16203 MB
avail memory = 15649 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa d6814f18
mainbus0 (root)
ACPI: RSDP 0x00000000D5936000 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000D5936078 00006C (v01 LENOVO TC-F1 0000011B AMI 00010013)
ACPI: FACP 0x00000000D5941508 0000F4 (v04 LENOVO TC-F1 0000011B AMI 00010013)
ACPI: DSDT 0x00000000D5936170 00B392 (v02 LENOVO TC-F1 0000011B INTL 20051117)
ACPI: FACS 0x00000000D6385F80 000040
ACPI: APIC 0x00000000D5941600 000072 (v03 LENOVO TC-F1 0000011B AMI 00010013)
ACPI: FPDT 0x00000000D5941678 000044 (v01 LENOVO TC-F1 0000011B AMI 00010013)
ACPI: MCFG 0x00000000D59416C0 00003C (v01 LENOVO TC-F1 0000011B MSFT 00000097)
ACPI: SLIC 0x00000000D5941700 000176 (v01 LENOVO TC-F1 0000011B AMI 00010013)
ACPI: HPET 0x00000000D5941878 000038 (v01 LENOVO TC-F1 0000011B AMI. 00000005)
ACPI: SSDT 0x00000000D59418B0 00036D (v01 LENOVO TC-F1 0000011B INTL 20091112)
ACPI: SSDT 0x00000000D5941C20 0009AA (v01 LENOVO TC-F1 0000011B INTL 20051117)
ACPI: SSDT 0x00000000D59425D0 000A92 (v01 LENOVO TC-F1 0000011B INTL 20051117)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
cpu1: node 0, package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
cpu2: node 0, package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, id 0x206a7
cpu3: node 0, package 0, core 3, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <LENOVO,TC-F1 ,0000011b>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA85A5919C008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA85D56D63488 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA85A59168648 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1): not present
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, 16-byte FIFO
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 80.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 99.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 99.0 C, passive 99.0 C, passive cooling
acpiwmi0 at acpi0 (WMI1, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
ACPI: Enabled 4 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (desktop) Host Bridge (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: Intel Sandy Bridge GT2 Integrated Graphics Device (rev. 0x09)
Intel 6 Series Chipset Family MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x04)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC662
hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: DAC01 2ch: Speaker [Built-In]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb4)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 5: Intel 6 Series Chipset Family PCIe Root Port 6 (rev. 0xb4)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
re0: interrupting at msix1 vec 0
re0: RTL8168E/8111E (0x2c00)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8211D 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x04)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel H61 LPC (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: Intel 6 Series Chipset Family AHCI 1 (rev. 0x04)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xc720ff43<EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi2 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 80 us, pow 500 mW
acpicpu0: C3: FFH, lat 104 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 95000 mW, 3301 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 95000 mW, 3300 MHz
acpicpu0: P2: FFH, lat 10 us, pow 90163 mW, 3200 MHz
acpicpu0: P3: FFH, lat 10 us, pow 86347 mW, 3100 MHz
acpicpu0: P4: FFH, lat 10 us, pow 78924 mW, 2900 MHz
acpicpu0: P5: FFH, lat 10 us, pow 75316 mW, 2800 MHz
acpicpu0: P6: FFH, lat 10 us, pow 71791 mW, 2700 MHz
acpicpu0: P7: FFH, lat 10 us, pow 68319 mW, 2600 MHz
acpicpu0: P8: FFH, lat 10 us, pow 61575 mW, 2400 MHz
acpicpu0: P9: FFH, lat 10 us, pow 58302 mW, 2300 MHz
acpicpu0: P10: FFH, lat 10 us, pow 55107 mW, 2200 MHz
acpicpu0: P11: FFH, lat 10 us, pow 51964 mW, 2100 MHz
acpicpu0: P12: FFH, lat 10 us, pow 48886 mW, 2000 MHz
acpicpu0: P13: FFH, lat 10 us, pow 42921 mW, 1800 MHz
acpicpu0: P14: FFH, lat 10 us, pow 40033 mW, 1700 MHz
acpicpu0: P15: FFH, lat 10 us, pow 37215 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=98
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=98
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=98
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=98
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3292525000 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <HGST HTS541010A9E680>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect; first aligned sector: 8)
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-STDVD-RAM GH82N, K2BC82F1030, KU01> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Logitech (0x046d) USB Receiver (0xc534), rev 2.00/29.01, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: Logitech (0x046d) USB Receiver (0xc534), rev 2.00/29.01, addr 3, iclass 3/1
uhidev1: 17 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
uhidev2 at uhub3 port 2 configuration 1 interface 0
uhidev2: Cypress (0x04b4) USB Keyboard (0x0101), rev 1.10/0.01, addr 4, iclass 3/1
ukbd1 at uhidev2
wskbd1 at ukbd1 mux 1
uhidev3 at uhub3 port 2 configuration 1 interface 1
uhidev3: Cypress (0x04b4) USB Keyboard (0x0101), rev 1.10/0.01, addr 4, iclass 3/1
uhidev3: 2 report ids
uhid4 at uhidev3 reportid 1: input=2, output=0, feature=0
uhid5 at uhidev3 reportid 2: input=1, output=0, feature=0
umass0 at uhub3 port 4 configuration 1 interface 0
umass0: BUFFALO (0x0411) USB-SATA Bridge (0x00a8), rev 2.00/1.00, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SAMSUNG, HD501LJ, > disk fixed
sd0: 465 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
swwdog0: software watchdog initialized
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
Supports vblank timestamp caching Rev 2 (21.10.2013).
Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi3 vec 0 (i915drmkms0)
Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
DRM_I915_DEBUG enabled
DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xe0005000, size 1280x1024, depth 32, stride 5120
{drm:netbsd:intel_cpu_fifo_underrun_irq_handler+0x64} *ERROR* CPU pipe A FIFO underrun
{drm:netbsd:intel_set_pch_fifo_underrun_reporting+0x14e} *ERROR* uncleared pch fifo underrun on pch transcoder A
{drm:netbsd:cpt_irq_handler+0x1dd} *ERROR* PCH transcoder A FIFO underrun
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
nvmm0: attached, using backend x86-vmx
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)