Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-06-29 14:59:22
From: LambdaCalculus
Description: NetBSD/i386 9.3 (Emulated Pentium MMX/233 system via PCem)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021, 2022
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.3 (GENERIC) #0: Thu Aug 4 15:30:37 UTC 2022
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 127 MB
avail memory = 105 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Generic PC
mainbus0 (root)
Firmware Error (ACPI): A valid RSDP was not found (20190405/tbxfroot-261)
autoconfiguration error: acpi_probe: failed to initialize tables
ACPI Error: Could not remove SCI handler (20190405/evmisc-312)
cpu0 at mainbus0
cpu0: Intel 586-class, 233MHz, id 0x543
cpu0: package 0, core 0, smt 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 7030 (rev. 0x00)
pcib0 at pci0 dev 7 function 0: vendor 8086 product 122e (rev. 0x00)
piixide0 at pci0 dev 7 function 1: Intel 82371FB IDE controller (PIIX) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
vga0 at pci0 dev 8 function 0: vendor 5333 product 8a01 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
ne1 at isa0 port 0x300-0x31f irq 10
ne1: NE2000 Ethernet
ne1: Ethernet address [_MAC_XXXXXXXXXX]
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
sb0 at isa0 port 0x220-0x237 irq 5 drq 1,5: dsp v4.05
audio0 at sb0: playback, capture, half duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 233333090 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0: <PCemHD>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 4095 MB, 8322 cyl, 16 head, 63 sec, 512 bytes/sect x 8388576 sectors
wd0: 32-bit data port
wd0(piixide0:0:0): using PIO mode 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PCemCD, , v1.0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/9.3/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)