Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2023-06-30 01:41:30
From: jklos
Description: NanoPi NEO with NAS kit
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0_BETA (GENERIC) #0: Thu Jun 29 01:56:18 UTC 2023 [ 1.000000] [_EMAIL_XXXXXXXX]:/usr/obj-evbarm/sys/arch/evbarm/compile/GENERIC [ 1.000000] total memory = 512 MB [ 1.000000] avail memory = 484 MB [ 1.000000] entropy: entering seed from bootloader with 0 bits of entropy [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: FriendlyARM NanoPi NEO [ 1.000000] simplebus1 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] simplebus3 at simplebus0 [ 1.000000] cpu0 at cpus0: Cortex-A7 r0p5 (Cortex V7A core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu0: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu0: L2 512KB/64B 8-way (1024 set) write-through PIPT Unified cache [ 1.000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] cpufreqdt0 at cpu0 [ 1.000000] cpu1 at cpus0: Cortex-A7 r0p5 (Cortex V7A core) [ 1.000000] cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu1: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.000000] cpu1: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu1: L2 512KB/64B 8-way (1024 set) write-through PIPT Unified cache [ 1.000000] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] cpufreqdt1 at cpu1 [ 1.000000] cpu2 at cpus0: Cortex-A7 r0p5 (Cortex V7A core) [ 1.000000] cpu2: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu2: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.000000] cpu2: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu2: L2 512KB/64B 8-way (1024 set) write-through PIPT Unified cache [ 1.000000] vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] cpufreqdt2 at cpu2 [ 1.000000] cpu3 at cpus0: Cortex-A7 r0p5 (Cortex V7A core) [ 1.000000] cpu3: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu3: L1 32KB/32B 2-way (512 set) VIPT Instruction cache [ 1.000000] cpu3: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu3: L2 512KB/64B 8-way (1024 set) write-through PIPT Unified cache [ 1.000000] vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] cpufreqdt3 at cpu3 [ 1.000000] gic0 at simplebus1: GIC [ 1.000000] armgic0 at gic0: Generic Interrupt Controller, 160 sources (150 valid) [ 1.000000] armgic0: 16 Priorities, 128 SPIs, 7 PPIs, 15 SGIs [ 1.000000] fclock0 at simplebus2: 24000000 Hz fixed clock (osc24M) [ 1.000000] fclock1 at simplebus2: 32768 Hz fixed clock (ext_osc32k) [ 1.000000] gtmr0 at simplebus0: Generic Timer [ 1.000000] gtmr0: interrupting on GIC irq 27 [ 1.000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 [ 1.000004] sun8ih3ccu0 at simplebus1: H3 CCU [ 1.000004] sunxinmi0 at simplebus1: R_INTC, NMI IRQ 32 [ 1.000004] sun8ih3rccu0 at simplebus1: H3 PRCM CCU [ 1.000004] sunxigpio0 at simplebus1: PIO [ 1.000004] gpio0 at sunxigpio0: 94 pins [ 1.000004] sunxigpio0: interrupting on GIC irq 43 [ 1.000004] sunxigpio1 at simplebus1: PIO [ 1.000004] gpio1 at sunxigpio1: 12 pins [ 1.000004] sunxigpio1: interrupting on GIC irq 77 [ 1.000004] sunxisramc0 at simplebus1: SRAM Controller [ 1.000004] sun6idma0 at simplebus1: DMA controller (12 channels) [ 1.000004] sun6idma0: interrupting on GIC irq 82 [ 1.000004] sunxisid0 at simplebus1: Security ID EFUSE [ 1.000004] gregulator0 at simplebus0: cpux-supply [ 1.000004] com0 at simplebus1: DesignWare APB UART, 64-byte FIFO [ 1.000004] com0: console [ 1.000004] com0: interrupting on GIC irq 32 [ 1.000004] fregulator0 at simplebus0: vcc3v3 [ 1.000004] fregulator1 at simplebus0: vcc3v0 [ 1.000004] fregulator2 at simplebus0: vcc5v0 [ 1.000004] sunxiusbphy0 at simplebus1: USB PHY [ 1.000004] /soc/clock@1000000 at simplebus1 not configured [ 1.000004] /soc/mixer@1100000 at simplebus1 not configured [ 1.000004] /soc/lcd-controller@1c0c000 at simplebus1 not configured [ 1.000004] sunxirtc0 at simplebus1: RTC [ 1.000004] sunxirtc0: disabled [ 1.000004] emac0 at simplebus1: EMAC [ 1.000004] WARNING: system needs entropy for security; see entropy(7) [ 1.000004] emac0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000004] emac0: interrupting on GIC irq 114 [ 1.000004] ukphy0 at emac0 phy 1: OUI 0x0088a0, model 0x0000, rev. 0 [ 1.000004] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000004] h3codec0 at simplebus1: H3 Audio Codec (analog part) [ 1.000004] /soc/hdmi-phy@1ef0000 at simplebus1 not configured [ 1.000004] /soc/dram-controller@1c62000 at simplebus1 not configured [ 1.000004] /gpu-opp-table at simplebus0 not configured [ 1.000004] /opp_table0 at simplebus0 not configured [ 1.000004] sunxithermal0 at simplebus1: Thermal sensor controller [ 1.000004] sunxithermal0: interrupting on GIC irq 63 [ 1.000004] sunxithermal0: cpu: alarm 90C hyst 15C shut 105C [ 1.000004] sunximmc0 at simplebus1: SD/MMC controller [ 1.000004] sunximmc0: interrupting on GIC irq 92 [ 1.000004] /soc/mailbox@1c17000 at simplebus1 not configured [ 1.000004] motg0 at simplebus1: 'peripheral' mode not supported [ 1.000004] ehci0 at simplebus1: EHCI [ 1.000004] ehci0: interrupting on GIC irq 104 [ 1.000004] ehci0: EHCI version 1.0 [ 1.000004] ehci0: 1 companion controller, 1 port [ 1.000004] usb0 at ehci0: USB revision 2.0 [ 1.000004] ohci0 at simplebus1: OHCI [ 1.000004] ohci0: interrupting on GIC irq 105 [ 1.000004] ohci0: OHCI version 1.0 [ 1.000004] usb1 at ohci0: USB revision 1.0 [ 1.000004] ehci1 at simplebus1: EHCI [ 1.000004] ehci1: interrupting on GIC irq 106 [ 1.000004] ehci1: EHCI version 1.0 [ 1.000004] ehci1: 1 companion controller, 1 port [ 1.000004] usb2 at ehci1: USB revision 2.0 [ 1.000004] ohci1 at simplebus1: OHCI [ 1.000004] ohci1: interrupting on GIC irq 107 [ 1.000004] ohci1: OHCI version 1.0 [ 1.000004] usb3 at ohci1: USB revision 1.0 [ 1.000004] ehci2 at simplebus1: EHCI [ 1.000004] ehci2: interrupting on GIC irq 108 [ 1.000004] ehci2: EHCI version 1.0 [ 1.000004] ehci2: 1 companion controller, 1 port [ 1.000004] usb4 at ehci2: USB revision 2.0 [ 1.000004] ohci2 at simplebus1: OHCI [ 1.000004] ohci2: interrupting on GIC irq 109 [ 1.000004] ohci2: OHCI version 1.0 [ 1.000004] usb5 at ohci2: USB revision 1.0 [ 1.000004] ehci3 at simplebus1: EHCI [ 1.000004] ehci3: interrupting on GIC irq 110 [ 1.000004] ehci3: EHCI version 1.0 [ 1.000004] ehci3: 1 companion controller, 1 port [ 1.000004] usb6 at ehci3: USB revision 2.0 [ 1.000004] ohci3 at simplebus1: OHCI [ 1.000004] ohci3: interrupting on GIC irq 111 [ 1.000004] ohci3: OHCI version 1.0 [ 1.000004] usb7 at ohci3: USB revision 1.0 [ 1.000004] sunxiwdt0 at simplebus1: Watchdog [ 1.000004] sunxiwdt0: default watchdog period is 16 seconds [ 1.000004] sunxitwi0 at simplebus1: Marvell TWSI controller [ 1.000004] sunxitwi0: interrupting on GIC irq 38 [ 1.000004] iic0 at sunxitwi0: I2C bus [ 1.000004] dsrtc0 at iic0 addr 0x68: DS1307 Real-time Clock/NVRAM [ 1.000004] /soc/deinterlace@1400000 at simplebus1 not configured [ 1.000004] sun8icrypto0 at simplebus1: Crypto Engine [ 1.000004] sun8icrypto0: interrupting on GIC irq 126 [ 1.000004] sun8icrypto0: AES-128 self-test initiated [ 1.000004] sun8icrypto0: AES-128 self-test passed [ 1.000004] /soc/gpu@1c40000 at simplebus1 not configured [ 1.000004] psci0 at simplebus0: PSCI 0.1 [ 1.000004] armpmu0 at simplebus0: Performance Monitor Unit [ 1.000004] gpioleds0 at simplebus0: nanopi:blue:status nanopi:green:pwr [ 1.000004] gpiokeys0 at simplebus0: k1 [ 1.000004] /soc/timer@1c20c00 at simplebus1 not configured [ 1.000004] /soc/video-codec@1c0e000 at simplebus1 not configured [ 1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000004] cpufreqdt0: rate: 1008.000 MHz, 1200000 uV [ 1.600917] sdmmc0 at sunximmc0 [ 1.610901] IPsec: Initialized Security Association Processing. [ 1.620914] uhub0 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.630907] uhub0: 1 port with 1 removable, self powered [ 1.630907] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.630907] uhub1: 1 port with 1 removable, self powered [ 1.640903] uhub2 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.640903] uhub2: 1 port with 1 removable, self powered [ 1.640903] uhub3 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.653169] uhub3: 1 port with 1 removable, self powered [ 1.653169] uhub4 at usb6: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.660905] uhub4: 1 port with 1 removable, self powered [ 1.660905] uhub5 at usb5: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.670903] uhub5: 1 port with 1 removable, self powered [ 1.670903] uhub6 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.680902] uhub6: 1 port with 1 removable, self powered [ 1.680902] uhub7 at usb7: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.690906] uhub7: 1 port with 1 removable, self powered [ 1.690906] armpmu0: interrupting on GIC irq 152 [ 1.700905] armpmu0: interrupting on GIC irq 153 [ 1.710903] armpmu0: interrupting on GIC irq 154 [ 1.720903] armpmu0: interrupting on GIC irq 155 [ 1.750907] sdmmc0: SD card status: 4-bit, C10, U1 [ 1.760939] ld0 at sdmmc0: <0x1b:0x534d:00000:0x10:0x60671430:0x0f8> [ 1.760939] ld0: 61056 MB, 7783 cyl, 255 head, 63 sec, 512 bytes/sect x 125042688 sectors [ 1.770908] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.780938] umass0 at uhub6 port 1 configuration 1 interface 0 [ 2.790940] umass0: JMicron (0x152d) External Disk 3.0 (0x0578), rev 2.10/2.27, addr 2 [ 2.790940] umass0: using SCSI over Bulk-Only [ 2.790940] scsibus0 at umass0: 2 targets, 1 lun per target [ 3.330955] sd0 at scsibus0 target 0 lun 0: <JMicron, Tech, 0227> disk fixed [ 3.340957] sd0: fabricating a geometry [ 3.350957] sd0: 111 GB, 114473 cyl, 64 head, 32 sec, 512 bytes/sect x 234441648 sectors [ 3.370958] sd0: fabricating a geometry [ 3.380960] swwdog0: software watchdog initialized [ 3.390960] boot device: sd0 [ 3.400962] root on sd0a dumps on sd0b [ 3.410961] root file system type: ffs [ 3.410961] kern.module.path=/stand/evbarm/10.0/modules [ 5.311304] entropy: ready