Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-07-02 06:25:21
From: yamori813
Description: M86XXX
Starting kernel ... commandline: <NULL> arch_number: 1094 [ 1.0000000] uboot arg = 0, 0x446, 0x100, 0x10478b0 [ 1.0000000] NetBSD/evbarm (m86xxx) booting ... [ 1.0000000] initarm: Configuring system, CLIDR=1110000003 CTR=0x83338003 PMUSERSR=0 [ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Loaded initial symtab at 0x833eb4e0, strtab at 0x83438070, # entries 19622 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.4 (M86XXX) #96: Sun Jul 2 15:19:00 JST 2023 [ 1.0000000] hiroki@netbsd:/usr/home/hiroki/netbsd-src/sys/arch/evbarm/compile/obj/M86XXX [ 1.0000000] total memory = 256 MB [ 1.0000000] avail memory = 242 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0 core 0: 900 MHz Cortex-A9 r2p1 (Cortex V7A core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache [ 1.0000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.0000000] armperiph0 at mainbus0 [ 1.0000000] armgic0 at armperiph0: Generic Interrupt Controller, 96 sources (85 valid) [ 1.0000000] armgic0: 32 Priorities, 64 SPIs, 5 PPIs, 16 SGIs [ 1.0000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (450 MHz) [ 1.0000000] arma9tmr0: interrupting on irq 27 [ 1.0000000] axi0 at mainbus0: Advanced eXtensible Interface [ 1.0000000] com0 at axi0 addr 0x96400000-0x96403fff intr 59: ns16650, no ERS, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] xhci0 at axi0 addr 0x9f000000 intr 54: USB Interface [ 1.0000000] usb0 at xhci0: USB revision 3.0 [ 1.0000000] usb1 at xhci0: USB revision 2.0 [ 1.0000030] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.0000030] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.0100713] WARNING: system needs entropy for security; see entropy(7) [ 1.4599891] uhub2 at uhub1 port 1: vendor 0409 (0x0409) product 005a (0x005a), class 9/0, rev 2.00/1.00, addr 1 [ 1.4599891] uhub2: single transaction translator [ 2.2399904] umass0 at uhub2 port 1 configuration 1 interface 0 [ 2.2503970] umass0: vendor 0000 (0x0000) product 0000 (0x0000), rev 2.00/0.00, addr 2 [ 2.8499878] scsibus0 at umass0: 2 targets, 1 lun per target [ 2.8499878] sd0 at scsibus0 target 0 lun 0: <Maxtor 6, Y160L0, YAR4> disk fixed [ 2.8499878] sd0: fabricating a geometry [ 2.8610423] sd0: 152 GB, 156334 cyl, 64 head, 32 sec, 512 bytes/sect x 320173056 sectors [ 2.8610423] sd0: fabricating a geometry [ 3.2599885] kue0 at uhub2 port 3 [ 3.2599885] kue0: LINKSYS (0x0565) USB Network Adapter (0x0005), rev 1.00/0.02, addr 3 [ 3.2599885] kue0: cold boot, downloading firmware [ 3.4099892] kue0: Ethernet address [_MAC_XXXXXXXXXX] [ 3.4099892] boot device: <unknown> [ 3.4099892] root device: