Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-07-09 05:38:23
From: beardwalker
Description: Getac F110 G2
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (2394.56-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8053780480 (7680 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <Getac_ GETACGTC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfe120-0xfe13e
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <Getac_ GETACGTC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xe1110000-0xe1113fff irq 16 at device 3.0 on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xe1100000-0xe110ffff irq 7 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Broadwell HDA Controller> mem 0xe1114000-0xe1117fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xe1119000-0xe11193ff irq 23 at device 29.0 on pci0
usbus1: waiting for BIOS to give up control
usbus1: timed out waiting for BIOS
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x3088-0x308f,0x309c-0x309f,0x3080-0x3087,0x3098-0x309b,0x3060-0x307f mem 0xe1118000-0xe11187ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart2: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1197228358 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC282 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC282 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC282 (Internal Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC282 (Front Analog)> at nid 33 and 25 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SK hynix SC311 SATA 128GB 70000P10> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: 15 ports with 15 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <Generic FN80AF-443H> at usbus0
uhub0: 3 ports with 3 removable, self powered
ugen0.3: <Sierra Wireless, Incorporated EM7355> at usbus0
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
ugen0.4: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00> at usbus0
uhub2: 8 ports with 8 removable, self powered
ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.6: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 5> on usbus0
uhub3: MTT enabled
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.7: <Genius Tablet> at usbus0
Root mount waiting for: usbus0
ugen0.8: <Chicony Electronics Co.,Ltd. USB 2.0 Camera> at usbus0
ugen0.9: <STMicroelectronics STSENSORHUB> at usbus0
ugen0.10: <Generic EMV Smartcard Reader> at usbus0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x3040-0x305f mem 0xe111a000-0xe111a0ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
Cuse v0.1.37 @ /dev/cuse
Intel(R) Wireless WiFi based driver for FreeBSD
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.GTC0.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.GTC1.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xe1000000-0xe1001fff irq 16 at device 0.0 on pci2
iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
iwm0: PHY ctxt cmd error. ret=35
iwm0: iwm_auth: failed update phy ctxt
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: iwm_bring_down_firmware: failed to update power management
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
u3g0 on uhub1
u3g0: <Sierra Wireless, Incorporated EM7355, class 0/0, rev 2.00/0.06, addr 2> on usbus0
u3g0: Found 3 ports.
ums0 on uhub1
ums0: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00, class 0/0, rev 2.01/7.02, addr 3> on usbus0
uhid0 on uhub3
uhid0: <Genius Tablet, class 0/0, rev 1.10/0.01, addr 6> on usbus0
uhid1 on uhub3
uhid1: <STMicroelectronics STSENSORHUB, class 0/0, rev 2.00/0.34, addr 8> on usbus0
ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0
Security policy loaded: MAC/ntpd (mac_ntpd)
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x00003001 | ADVANCED_SYSASSERT
iwm0: 00A00220 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00043850 | branchlink2
iwm0: 0004A5E8 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: 00000001 | data1
iwm0: 00000000 | data2
iwm0: DEADBEEF | data3
iwm0: 00000000 | beacon time
iwm0: 01636769 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 0163676A | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000016 | uCode version major
iwm0: 00058404 | uCode version minor
iwm0: 00000210 | hw version
iwm0: 0000FF0F | board version
iwm0: 0932002B | hcmd
iwm0: 24022080 | isr0
iwm0: 01000000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C80 | isr3
iwm0: 00000000 | isr4
iwm0: 01000112 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00018030 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 03071928 | timestamp
iwm0: 00006068 | flow_handler
iwm0: driver status:
iwm0: tx ring 0: qid=0 cur=0 queued=0
iwm0: tx ring 1: qid=1 cur=0 queued=0
iwm0: tx ring 2: qid=2 cur=0 queued=0
iwm0: tx ring 3: qid=3 cur=0 queued=0
iwm0: tx ring 4: qid=4 cur=0 queued=0
iwm0: tx ring 5: qid=5 cur=0 queued=0
iwm0: tx ring 6: qid=6 cur=0 queued=0
iwm0: tx ring 7: qid=7 cur=0 queued=0
iwm0: tx ring 8: qid=8 cur=0 queued=0
iwm0: tx ring 9: qid=9 cur=51 queued=1
iwm0: tx ring 10: qid=10 cur=0 queued=0
iwm0: tx ring 11: qid=11 cur=0 queued=0
iwm0: tx ring 12: qid=12 cur=0 queued=0
iwm0: tx ring 13: qid=13 cur=0 queued=0
iwm0: tx ring 14: qid=14 cur=0 queued=0
iwm0: tx ring 15: qid=15 cur=0 queued=0
iwm0: tx ring 16: qid=16 cur=0 queued=0
iwm0: tx ring 17: qid=17 cur=0 queued=0
iwm0: tx ring 18: qid=18 cur=0 queued=0
iwm0: tx ring 19: qid=19 cur=0 queued=0
iwm0: tx ring 20: qid=20 cur=0 queued=0
iwm0: tx ring 21: qid=21 cur=0 queued=0
iwm0: tx ring 22: qid=22 cur=0 queued=0
iwm0: tx ring 23: qid=23 cur=0 queued=0
iwm0: tx ring 24: qid=24 cur=0 queued=0
iwm0: tx ring 25: qid=25 cur=0 queued=0
iwm0: tx ring 26: qid=26 cur=0 queued=0
iwm0: tx ring 27: qid=27 cur=0 queued=0
iwm0: tx ring 28: qid=28 cur=0 queued=0
iwm0: tx ring 29: qid=29 cur=0 queued=0
iwm0: tx ring 30: qid=30 cur=0 queued=0
iwm0: rx ring: cur=97
iwm0: 802.11 state 1
iwm0: iwm_intr: controller panicked, iv_state = 1; restarting
wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: iwm_auth: failed to update power management
iwm0: iwm_newstate: could not move to auth state: 35
wlan0: link state changed to UP
wlan0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 done
All buffers synced.
Uptime: 3m44s
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (2394.60-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8053780480 (7680 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <Getac_ GETACGTC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfe120-0xfe13e
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <Getac_ GETACGTC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xe1110000-0xe1113fff irq 16 at device 3.0 on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xe1100000-0xe110ffff irq 7 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Broadwell HDA Controller> mem 0xe1114000-0xe1117fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xe1119000-0xe11193ff irq 23 at device 29.0 on pci0
usbus1: waiting for BIOS to give up control
usbus1: timed out waiting for BIOS
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x3088-0x308f,0x309c-0x309f,0x3080-0x3087,0x3098-0x309b,0x3060-0x307f mem 0xe1118000-0xe11187ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart2: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1197228394 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC282 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC282 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC282 (Internal Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC282 (Front Analog)> at nid 33 and 25 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SK hynix SC311 SATA 128GB 70000P10> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus0
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0: 15 ports with 15 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <Generic FN80AF-443H> at usbus0
uhub1: 3 ports with 3 removable, self powered
ugen0.3: <Sierra Wireless, Incorporated EM7355> at usbus0
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
ugen0.4: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00> at usbus0
uhub2: 8 ports with 8 removable, self powered
ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.6: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 5> on usbus0
uhub3: MTT enabled
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.7: <Genius Tablet> at usbus0
ugen0.8: <Chicony Electronics Co.,Ltd. USB 2.0 Camera> at usbus0
Root mount waiting for: usbus0
ugen0.9: <STMicroelectronics STSENSORHUB> at usbus0
ugen0.10: <Generic EMV Smartcard Reader> at usbus0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x3040-0x305f mem 0xe111a000-0xe111a0ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
Cuse v0.1.37 @ /dev/cuse
Intel(R) Wireless WiFi based driver for FreeBSD
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.GTC0.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.GTC1.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xe1000000-0xe1001fff irq 16 at device 0.0 on pci2
iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: iwm_bring_down_firmware: failed to update power management
iwm0: PHY ctxt cmd error. ret=35
iwm0: iwm_auth: failed update phy ctxt
iwm0: iwm_newstate: could not move to auth state: 35
u3g0 on uhub0
u3g0: <Sierra Wireless, Incorporated EM7355, class 0/0, rev 2.00/0.06, addr 2> on usbus0
u3g0: Found 3 ports.
ums0 on uhub0
ums0: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00, class 0/0, rev 2.01/7.02, addr 3> on usbus0
uhid0 on uhub3
uhid0: <Genius Tablet, class 0/0, rev 1.10/0.01, addr 6> on usbus0
uhid1 on uhub3
uhid1: <STMicroelectronics STSENSORHUB, class 0/0, rev 2.00/0.34, addr 8> on usbus0
ng_ubt: HCI command 0x0c03 timed out
ng_ubt: HCI command 0x0c03 timed out
Security policy loaded: MAC/ntpd (mac_ntpd)
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x00003001 | ADVANCED_SYSASSERT
iwm0: 00A00220 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00043850 | branchlink2
iwm0: 0004A5E8 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: 00000001 | data1
iwm0: 00000000 | data2
iwm0: DEADBEEF | data3
iwm0: 00000000 | beacon time
iwm0: 0162FC12 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 0162FC13 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000016 | uCode version major
iwm0: 00058404 | uCode version minor
iwm0: 00000210 | hw version
iwm0: 0000FF0F | board version
iwm0: 0932002B | hcmd
iwm0: 24022080 | isr0
iwm0: 01000000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C80 | isr3
iwm0: 00000000 | isr4
iwm0: 01000112 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00018030 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 03071928 | timestamp
iwm0: 00006068 | flow_handler
iwm0: driver status:
iwm0: tx ring 0: qid=0 cur=0 queued=0
iwm0: tx ring 1: qid=1 cur=0 queued=0
iwm0: tx ring 2: qid=2 cur=0 queued=0
iwm0: tx ring 3: qid=3 cur=0 queued=0
iwm0: tx ring 4: qid=4 cur=0 queued=0
iwm0: tx ring 5: qid=5 cur=0 queued=0
iwm0: tx ring 6: qid=6 cur=0 queued=0
iwm0: tx ring 7: qid=7 cur=0 queued=0
iwm0: tx ring 8: qid=8 cur=0 queued=0
iwm0: tx ring 9: qid=9 cur=51 queued=1
iwm0: tx ring 10: qid=10 cur=0 queued=0
iwm0: tx ring 11: qid=11 cur=0 queued=0
iwm0: tx ring 12: qid=12 cur=0 queued=0
iwm0: tx ring 13: qid=13 cur=0 queued=0
iwm0: tx ring 14: qid=14 cur=0 queued=0
iwm0: tx ring 15: qid=15 cur=0 queued=0
iwm0: tx ring 16: qid=16 cur=0 queued=0
iwm0: tx ring 17: qid=17 cur=0 queued=0
iwm0: tx ring 18: qid=18 cur=0 queued=0
iwm0: tx ring 19: qid=19 cur=0 queued=0
iwm0: tx ring 20: qid=20 cur=0 queued=0
iwm0: tx ring 21: qid=21 cur=0 queued=0
iwm0: tx ring 22: qid=22 cur=0 queued=0
iwm0: tx ring 23: qid=23 cur=0 queued=0
iwm0: tx ring 24: qid=24 cur=0 queued=0
iwm0: tx ring 25: qid=25 cur=0 queued=0
iwm0: tx ring 26: qid=26 cur=0 queued=0
iwm0: tx ring 27: qid=27 cur=0 queued=0
iwm0: tx ring 28: qid=28 cur=0 queued=0
iwm0: tx ring 29: qid=29 cur=0 queued=0
iwm0: tx ring 30: qid=30 cur=0 queued=0
iwm0: rx ring: cur=98
iwm0: 802.11 state 1
iwm0: iwm_intr: controller panicked, iv_state = 1; restarting
wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: iwm_auth: failed to add sta
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x00002073 | ADVANCED_SYSASSERT
iwm0: 00A00220 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00043850 | branchlink2
iwm0: 0004A5E8 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: 00000000 | data1
iwm0: 00000000 | data2
iwm0: DEADBEEF | data3
iwm0: 000DDFC1 | beacon time
iwm0: 00BC70D2 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 00BC70D3 | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000016 | uCode version major
iwm0: 00058404 | uCode version minor
iwm0: 00000210 | hw version
iwm0: 0000FF0F | board version
iwm0: 09340018 | hcmd
iwm0: 24022080 | isr0
iwm0: 01000000 | isr1
iwm0: 00000002 | isr2
iwm0: 00414080 | isr3
iwm0: 00000000 | isr4
iwm0: 01000112 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00018030 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 03071928 | timestamp
iwm0: 00005868 | flow_handler
iwm0: driver status:
iwm0: tx ring 0: qid=0 cur=0 queued=0
iwm0: tx ring 1: qid=1 cur=0 queued=0
iwm0: tx ring 2: qid=2 cur=0 queued=0
iwm0: tx ring 3: qid=3 cur=0 queued=0
iwm0: tx ring 4: qid=4 cur=0 queued=0
iwm0: tx ring 5: qid=5 cur=0 queued=0
iwm0: tx ring 6: qid=6 cur=0 queued=0
iwm0: tx ring 7: qid=7 cur=0 queued=0
iwm0: tx ring 8: qid=8 cur=0 queued=0
iwm0: tx ring 9: qid=9 cur=53 queued=1
iwm0: tx ring 10: qid=10 cur=0 queued=0
iwm0: tx ring 11: qid=11 cur=0 queued=0
iwm0: tx ring 12: qid=12 cur=0 queued=0
iwm0: tx ring 13: qid=13 cur=0 queued=0
iwm0: tx ring 14: qid=14 cur=0 queued=0
iwm0: tx ring 15: qid=15 cur=0 queued=0
iwm0: tx ring 16: qid=16 cur=0 queued=0
iwm0: tx ring 17: qid=17 cur=0 queued=0
iwm0: tx ring 18: qid=18 cur=0 queued=0
iwm0: tx ring 19: qid=19 cur=0 queued=0
iwm0: tx ring 20: qid=20 cur=0 queued=0
iwm0: tx ring 21: qid=21 cur=0 queued=0
iwm0: tx ring 22: qid=22 cur=0 queued=0
iwm0: tx ring 23: qid=23 cur=0 queued=0
iwm0: tx ring 24: qid=24 cur=0 queued=0
iwm0: tx ring 25: qid=25 cur=0 queued=0
iwm0: tx ring 26: qid=26 cur=0 queued=0
iwm0: tx ring 27: qid=27 cur=0 queued=0
iwm0: tx ring 28: qid=28 cur=0 queued=0
iwm0: tx ring 29: qid=29 cur=0 queued=0
iwm0: tx ring 30: qid=30 cur=0 queued=0
iwm0: rx ring: cur=95
iwm0: 802.11 state 1
iwm0: iwm_intr: controller panicked, iv_state = 1; restarting
wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost
iwm0: iwm_auth: failed to add sta
iwm0: iwm_newstate: could not move to auth state: 35
wlan0: link state changed to UP
wlan0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 done
All buffers synced.
Uptime: 2m50s
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (2394.54-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8053784576 (7680 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <Getac_ GETACGTC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1 2 3
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfe120-0xfe13e
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <Getac_ GETACGTC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xe1110000-0xe1113fff irq 16 at device 3.0 on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xe1100000-0xe110ffff irq 7 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Broadwell HDA Controller> mem 0xe1114000-0xe1117fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xe1119000-0xe11193ff irq 23 at device 29.0 on pci0
usbus1: waiting for BIOS to give up control
usbus1: timed out waiting for BIOS
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x3088-0x308f,0x309c-0x309f,0x3080-0x3087,0x3098-0x309b,0x3060-0x307f mem 0xe1118000-0xe11187ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart2: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1197228478 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC282 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC282 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC282 (Internal Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC282 (Front Analog)> at nid 33 and 25 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SK hynix SC311 SATA 128GB 70000P10> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Trying to mount root from zfs:zroot/ROOT/default []...
uhub0: 15 ports with 15 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <Generic FN80AF-443H> at usbus0
uhub1: 3 ports with 3 removable, self powered
ugen0.3: <Sierra Wireless, Incorporated EM7355> at usbus0
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
ugen0.4: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00> at usbus0
uhub2: 8 ports with 8 removable, self powered
ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.6: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub0
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 5> on usbus0
uhub3: MTT enabled
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.7: <Genius Tablet> at usbus0
ugen0.8: <Chicony Electronics Co.,Ltd. USB 2.0 Camera> at usbus0
Root mount waiting for: usbus0
ugen0.9: <STMicroelectronics STSENSORHUB> at usbus0
ugen0.10: <Generic EMV Smartcard Reader> at usbus0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x3040-0x305f mem 0xe111a000-0xe111a0ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
Cuse v0.1.37 @ /dev/cuse
Intel(R) Wireless WiFi based driver for FreeBSD
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.GTC0.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.GTC1.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xe1000000-0xe1001fff irq 16 at device 0.0 on pci2
iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: iwm_bring_down_firmware: failed to update power management
iwm0: PHY ctxt cmd error. ret=35
iwm0: iwm_auth: failed update phy ctxt
iwm0: iwm_newstate: could not move to auth state: 35
u3g0 on uhub0
u3g0: <Sierra Wireless, Incorporated EM7355, class 0/0, rev 2.00/0.06, addr 2> on usbus0
u3g0: Found 3 ports.
ums0 on uhub0
ums0: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00, class 0/0, rev 2.01/7.02, addr 3> on usbus0
uhid0 on uhub3
uhid0: <Genius Tablet, class 0/0, rev 1.10/0.01, addr 6> on usbus0
uhid1 on uhub3
uhid1: <STMicroelectronics STSENSORHUB, class 0/0, rev 2.00/0.34, addr 8> on usbus0
ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087 product 0x0a2a> at usbus0
Security policy loaded: MAC/ntpd (mac_ntpd)
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x00003001 | ADVANCED_SYSASSERT
iwm0: 00A00220 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00043850 | branchlink2
iwm0: 0004A5E8 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: 00000001 | data1
iwm0: 00000000 | data2
iwm0: DEADBEEF | data3
iwm0: 00000000 | beacon time
iwm0: 01685CE9 | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 01685CEA | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000016 | uCode version major
iwm0: 00058404 | uCode version minor
iwm0: 00000210 | hw version
iwm0: 0000FF0F | board version
iwm0: 0932002B | hcmd
iwm0: 24022080 | isr0
iwm0: 01000000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C80 | isr3
iwm0: 00000000 | isr4
iwm0: 01000112 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00018030 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 03071928 | timestamp
iwm0: 00006870 | flow_handler
iwm0: driver status:
iwm0: tx ring 0: qid=0 cur=0 queued=0
iwm0: tx ring 1: qid=1 cur=0 queued=0
iwm0: tx ring 2: qid=2 cur=0 queued=0
iwm0: tx ring 3: qid=3 cur=0 queued=0
iwm0: tx ring 4: qid=4 cur=0 queued=0
iwm0: tx ring 5: qid=5 cur=0 queued=0
iwm0: tx ring 6: qid=6 cur=0 queued=0
iwm0: tx ring 7: qid=7 cur=0 queued=0
iwm0: tx ring 8: qid=8 cur=0 queued=0
iwm0: tx ring 9: qid=9 cur=51 queued=1
iwm0: tx ring 10: qid=10 cur=0 queued=0
iwm0: tx ring 11: qid=11 cur=0 queued=0
iwm0: tx ring 12: qid=12 cur=0 queued=0
iwm0: tx ring 13: qid=13 cur=0 queued=0
iwm0: tx ring 14: qid=14 cur=0 queued=0
iwm0: tx ring 15: qid=15 cur=0 queued=0
iwm0: tx ring 16: qid=16 cur=0 queued=0
iwm0: tx ring 17: qid=17 cur=0 queued=0
iwm0: tx ring 18: qid=18 cur=0 queued=0
iwm0: tx ring 19: qid=19 cur=0 queued=0
iwm0: tx ring 20: qid=20 cur=0 queued=0
iwm0: tx ring 21: qid=21 cur=0 queued=0
iwm0: tx ring 22: qid=22 cur=0 queued=0
iwm0: tx ring 23: qid=23 cur=0 queued=0
iwm0: tx ring 24: qid=24 cur=0 queued=0
iwm0: tx ring 25: qid=25 cur=0 queued=0
iwm0: tx ring 26: qid=26 cur=0 queued=0
iwm0: tx ring 27: qid=27 cur=0 queued=0
iwm0: tx ring 28: qid=28 cur=0 queued=0
iwm0: tx ring 29: qid=29 cur=0 queued=0
iwm0: tx ring 30: qid=30 cur=0 queued=0
iwm0: rx ring: cur=105
iwm0: 802.11 state 1
iwm0: iwm_intr: controller panicked, iv_state = 1; restarting
wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
wlan0: link state changed to UP
ums0: at uhub0, port 6, addr 3 (disconnected)
ums0: detached
ugen0.11: <ALCOR Generic USB Hub> at usbus0
uhub4 on uhub0
uhub4: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 11> on usbus0
uhub4: 4 ports with 4 removable, self powered
ugen0.12: <Macally Peripherals Macally iKeySlim> at usbus0
ukbd0 on uhub4
ukbd0: <Macally Peripherals Macally iKeySlim, class 0/0, rev 1.10/1.01, addr 12> on usbus0
kbd2 at ukbd0
ums0 on uhub4
ums0: <Macally Peripherals Macally iKeySlim, class 0/0, rev 1.10/1.01, addr 12> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=1
wlan0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 done
All buffers synced.
Uptime: 23m15s
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (2394.54-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8053780480 (7680 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <Getac_ GETACGTC>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfe120-0xfe13e
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <Getac_ GETACGTC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.20.INTA
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xe1110000-0xe1113fff irq 16 at device 3.0 on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xe1100000-0xe110ffff irq 7 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Broadwell HDA Controller> mem 0xe1114000-0xe1117fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xe1119000-0xe11193ff irq 23 at device 29.0 on pci0
usbus1: waiting for BIOS to give up control
usbus1: timed out waiting for BIOS
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x3088-0x308f,0x309c-0x309f,0x3080-0x3087,0x3098-0x309b,0x3060-0x307f mem 0xe1118000-0xe11187ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart2: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1197228468 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC282 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC282 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC282 (Internal Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek ALC282 (Front Analog)> at nid 33 and 25 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SK hynix SC311 SATA 128GB 70000P10> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: 15 ports with 15 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <ALCOR Generic USB Hub> at usbus0
uhub2 on uhub1
uhub2: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 1> on usbus0
uhub0: 3 ports with 3 removable, self powered
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
ugen0.3: <Macally Peripherals Macally iKeySlim> at usbus0
ukbd0 on uhub2
ukbd0: <Macally Peripherals Macally iKeySlim, class 0/0, rev 1.10/1.01, addr 2> on usbus0
kbd2 at ukbd0
uhub3: 8 ports with 8 removable, self powered
ugen0.4: <Generic FN80AF-443H> at usbus0
ugen0.5: <Sierra Wireless, Incorporated EM7355> at usbus0
Root mount waiting for: usbus0
ugen0.6: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00> at usbus0
ugen0.7: <vendor 0x8087 product 0x0a2a> at usbus0
ugen0.8: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub4 on uhub1
uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 7> on usbus0
uhub4: MTT enabled
Root mount waiting for: usbus0
uhub4: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.9: <Genius Tablet> at usbus0
Root mount waiting for: usbus0
ugen0.10: <Chicony Electronics Co.,Ltd. USB 2.0 Camera> at usbus0
ugen0.11: <STMicroelectronics STSENSORHUB> at usbus0
Root mount waiting for: usbus0
ugen0.12: <Generic EMV Smartcard Reader> at usbus0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x3040-0x305f mem 0xe111a000-0xe111a0ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
Cuse v0.1.37 @ /dev/cuse
Intel(R) Wireless WiFi based driver for FreeBSD
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.GTC0.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
ACPI: \134_SB.GTC1.WQIF: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xe1000000-0xe1001fff irq 16 at device 0.0 on pci2
iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX]
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
iwm0: iwm_bring_down_firmware: failed to update power management
iwm0: dumping device error log
iwm0: Start Error Log Dump:
iwm0: Status: 0x3, count: 6
iwm0: 0x00003001 | ADVANCED_SYSASSERT
iwm0: 00A00220 | trm_hw_status0
iwm0: 00000000 | trm_hw_status1
iwm0: 00043850 | branchlink2
iwm0: 0004A5E8 | interruptlink1
iwm0: 00000000 | interruptlink2
iwm0: 00000001 | data1
iwm0: 00000000 | data2
iwm0: DEADBEEF | data3
iwm0: 00000000 | beacon time
iwm0: 00BDB94C | tsf low
iwm0: 00000000 | tsf hi
iwm0: 00000000 | time gp1
iwm0: 00BDB94D | time gp2
iwm0: 00000000 | uCode revision type
iwm0: 00000016 | uCode version major
iwm0: 00058404 | uCode version minor
iwm0: 00000210 | hw version
iwm0: 0000FF0F | board version
iwm0: 092C002B | hcmd
iwm0: 24022080 | isr0
iwm0: 01000000 | isr1
iwm0: 00000002 | isr2
iwm0: 00417C80 | isr3
iwm0: 00000000 | isr4
iwm0: 01000112 | last cmd Id
iwm0: 00000000 | wait_event
iwm0: 00000050 | l2p_control
iwm0: 00018030 | l2p_duration
iwm0: 0000003F | l2p_mhvalid
iwm0: 00000000 | l2p_addr_match
iwm0: 00000007 | lmpm_pmg_sel
iwm0: 03071928 | timestamp
iwm0: 00004858 | flow_handler
iwm0: driver status:
iwm0: tx ring 0: qid=0 cur=0 queued=0
iwm0: tx ring 1: qid=1 cur=0 queued=0
iwm0: tx ring 2: qid=2 cur=0 queued=0
iwm0: tx ring 3: qid=3 cur=0 queued=0
iwm0: tx ring 4: qid=4 cur=0 queued=0
iwm0: tx ring 5: qid=5 cur=0 queued=0
iwm0: tx ring 6: qid=6 cur=0 queued=0
iwm0: tx ring 7: qid=7 cur=0 queued=0
iwm0: tx ring 8: qid=8 cur=0 queued=0
iwm0: tx ring 9: qid=9 cur=45 queued=1
iwm0: tx ring 10: qid=10 cur=0 queued=0
iwm0: tx ring 11: qid=11 cur=0 queued=0
iwm0: tx ring 12: qid=12 cur=0 queued=0
iwm0: tx ring 13: qid=13 cur=0 queued=0
iwm0: tx ring 14: qid=14 cur=0 queued=0
iwm0: tx ring 15: qid=15 cur=0 queued=0
iwm0: tx ring 16: qid=16 cur=0 queued=0
iwm0: tx ring 17: qid=17 cur=0 queued=0
iwm0: tx ring 18: qid=18 cur=0 queued=0
iwm0: tx ring 19: qid=19 cur=0 queued=0
iwm0: tx ring 20: qid=20 cur=0 queued=0
iwm0: tx ring 21: qid=21 cur=0 queued=0
iwm0: tx ring 22: qid=22 cur=0 queued=0
iwm0: tx ring 23: qid=23 cur=0 queued=0
iwm0: tx ring 24: qid=24 cur=0 queued=0
iwm0: tx ring 25: qid=25 cur=0 queued=0
iwm0: tx ring 26: qid=26 cur=0 queued=0
iwm0: tx ring 27: qid=27 cur=0 queued=0
iwm0: tx ring 28: qid=28 cur=0 queued=0
iwm0: tx ring 29: qid=29 cur=0 queued=0
iwm0: tx ring 30: qid=30 cur=0 queued=0
iwm0: rx ring: cur=80
iwm0: 802.11 state 1
iwm0: iwm_intr: controller panicked, iv_state = 1; restarting
wlan0: ieee80211_new_state_locked: pending SCAN -> AUTH transition lost
iwm0: Failed to send binding (action:1): 35
iwm0: iwm_auth: binding update cmd
iwm0: iwm_newstate: could not move to auth state: 35
ums0 on uhub2
ums0: <Macally Peripherals Macally iKeySlim, class 0/0, rev 1.10/1.01, addr 2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=1
ums1 on uhub1
ums1: <eGalax Inc. eGalaxTouch EXC3000-0407-44.00.00, class 0/0, rev 2.01/7.02, addr 5> on usbus0
uhid0 on uhub4
uhid0: <Genius Tablet, class 0/0, rev 1.10/0.01, addr 8> on usbus0
uhid1 on uhub4
uhid1: <STMicroelectronics STSENSORHUB, class 0/0, rev 2.00/0.34, addr 10> on usbus0
u3g0 on uhub1
u3g0: <Sierra Wireless, Incorporated EM7355, class 0/0, rev 2.00/0.06, addr 4> on usbus0
u3g0: Found 3 ports.
wlan0: link state changed to UP
ng_ubt: HCI command 0x0c03 timed out
ng_ubt: HCI command 0x0c03 timed out
Security policy loaded: MAC/ntpd (mac_ntpd)
ums1: at uhub1, port 6, addr 5 (disconnected)
ums1: detached