Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2023-07-13 12:18:40
From: steve
Description: FreeBSD/amd64 on LENOVO 6234W4Y
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p8 GENERIC amd64
FreeBSD clang version 13.0.0 ([_EMAIL_XXXXX]:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
VT(vga): resolution 640x480
module_register: cannot register tmpfs from kernel; already loaded from tmpfs.ko
Module tmpfs failed to register: 17
CPU: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz (2992.65-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x1067a  Family=0x6  Model=0x17  Stepping=10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc08e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,OSXSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7461167104 (7115 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <LENOVO TC-5C   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf6920-0xf693e
smbios0: Version: 2.5
aesni0: No AES or SHA support.
acpi0: <LENOVO TC-5C>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPB], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1c70-0x1c77 mem 0xfc000000-0xfc3fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel Q45 SVGA controller> on vgapci0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0.
agp0: aperture size is 256M, detected 131068k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0xfc400000-0xfc4fffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x1c88-0x1c8f,0x1c7c-0x1c7f,0x1c80-0x1c87,0x1c78-0x1c7b,0x1c40-0x1c4f irq 18 at device 3.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart2: <4 Series Chipset Serial KT Controller> port 0x1c90-0x1c97 mem 0xfc526000-0xfc526fff irq 17 at device 3.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) 82567LM-3 ICH10> port 0x1820-0x183f mem 0xfc500000-0xfc51ffff,0xfc527000-0xfc527fff irq 16 at device 25.0 on pci0
em0: EEPROM V0.4-3
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <UHCI (generic) USB controller> port 0x1840-0x185f irq 16 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <UHCI (generic) USB controller> port 0x1860-0x187f irq 17 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <UHCI (generic) USB controller> port 0x1880-0x189f irq 18 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc528000-0xfc5283ff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801JD HDA Controller> mem 0xfc520000-0xfc523fff irq 16 at device 27.0 on pci0
uhci3: <UHCI (generic) USB controller> port 0x18a0-0x18bf irq 16 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <UHCI (generic) USB controller> port 0x18c0-0x18df irq 17 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <UHCI (generic) USB controller> port 0x18e0-0x18ff irq 18 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfc529000-0xfc5293ff irq 16 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <AHCI SATA controller> port 0x1ca8-0x1caf,0x1c9c-0x1c9f,0x1ca0-0x1ca7,0x1c98-0x1c9b,0x1c00-0x1c1f mem 0xfc52a000-0xfc52a7ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 3 flags 0x10 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
module_register_init: MOD_LOAD (tmpfs, 0xffffffff80ce7f30, 0xffffffff818f4630) error 17
Timecounter "TSC-low" frequency 1496240569 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen7.1: <Intel EHCI root HUB> at usbus7
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub0 on usbus7
uhub1 on usbus6
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub2 on usbus5
uhub3 on usbus4
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub4 on usbus3
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub5 on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub6 on usbus1
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub7 on usbus0
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
hdacc0: <Analog Devices AD1882 HDA CODEC> at cad 2 on hdac0
hdaa0: <Analog Devices AD1882 Audio Function Group> at nid 1 on hdacc0
hdaa0: Adding 58 (nid=35): Max connection reached! max=32
pcm0: <Analog Devices AD1882 (Analog)> at nid 18 and 23,20,24,21 on hdaa0
pcm1: <Analog Devices AD1882 (Front Analog Headphones)> at nid 17 on hdaa0
sysctl_unregister_oid: failed(22) to unregister sysctl(tmpfs)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
Root mount waiting for: CAM usbus3 usbus7
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
Root mount waiting for: CAM usbus3 usbus7
uhub0: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD1600AAJS-08L7A0 03.03E03> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <WDC WD3200BEVT-00ZCT0 11.01A11> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 305245MB (625142448 512 byte sectors)
ichsmb0: <Intel 82801JD (ICH10) SMBus controller> port 0x1c20-0x1c3f mem 0xfc52b000-0xfc52b0ff irq 17 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134WMI1.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
lo0: link state changed to UP