Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-07-25 14:43:18
From: olgeni
Description: FreeBSD/amd64 on System manufacturer System Product Name
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE-p1 releng/13.2-n254621-08b87f63a046 BSDKIT amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) VT(vga): text 80x25 CPU: AMD Phenom(tm) II X4 965 Processor (3411.40-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x100f43 Family=0x10 Model=0x4 Stepping=3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant real memory = 17179869184 (16384 MB) avail memory = 16618586112 (15848 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <030811 APIC1042> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20201113/tbfadt-748) ioapic0 <Version 2.1> irqs 0-23 Launching APs: 2 1 3 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xfc2a0-0xfc2be smbios0: Version: 2.6 aesni0: No AES or SHA support. acpi0: <030811 XSDT1042> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xfd000000-0xfdffffff,0xd8000000-0xdfffffff,0xd6000000-0xd7ffffff irq 18 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <NVIDIA GF119 HDA Controller> mem 0xfe97c000-0xfe97ffff irq 19 at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0 pci2: <ACPI PCI bus> on pcib2 atapci0: <JMicron JMB361 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfcfffc00-0xfcfffdff irq 17 at device 0.0 on pci2 ahci0: <JMicron JMB361 AHCI SATA controller> at channel -1 on atapci0 ahci0: AHCI v1.10 with 1 3Gbps ports, Port Multiplier supported ahci0: quirks=0x9<NOFORCE,1CH> ahcich0: <AHCI channel> at channel 0 on ahci0 ata2: <ATA channel> at channel 0 on atapci0 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfcefe000-0xfcefffff irq 18 at device 0.0 on pci3 xhci0: 32 bytes context size, 32-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci1: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfccfa000-0xfccfa3ff irq 19 at device 17.0 on pci0 ahci1: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported ahci1: quirks=0x22000<ATI_PMP_BUG,1MSI> ahcich1: <AHCI channel> at channel 0 on ahci1 ahcich2: <AHCI channel> at channel 1 on ahci1 ahcich3: <AHCI channel> at channel 2 on ahci1 ahcich4: <AHCI channel> at channel 3 on ahci1 ahcich5: <AHCI channel> at channel 4 on ahci1 ahcich6: <AHCI channel> at channel 5 on ahci1 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfccf3000-0xfccf3fff irq 18 at device 18.0 on pci0 usbus1 on ohci0 usbus1: 12Mbps Full Speed USB v1.0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfccfa400-0xfccfa4ff irq 17 at device 18.2 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfccf8000-0xfccf8fff irq 18 at device 19.0 on pci0 usbus3 on ohci1 usbus3: 12Mbps Full Speed USB v1.0 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfccfa800-0xfccfa8ff irq 17 at device 19.2 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci1 usbus4: 480Mbps High Speed USB v2.0 hdac1: <ATI SB600 HDA Controller> mem 0xfccf4000-0xfccf7fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <serial bus, FireWire> at device 8.0 (no driver attached) ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfccf9000-0xfccf9fff irq 18 at device 20.5 on pci0 usbus5 on ohci2 usbus5: 12Mbps Full Speed USB v1.0 pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xd5fff000-0xd5ffffff,0xd5ff8000-0xd5ffbfff irq 16 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfccfb000-0xfccfbfff irq 18 at device 22.0 on pci0 usbus6 on ohci3 usbus6: 12Mbps Full Speed USB v1.0 ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfccfac00-0xfccfacff irq 17 at device 22.2 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci2 usbus7: 480Mbps High Speed USB v2.0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 14.0. psm0: model Generic PS/2 mouse, device ID 0 orm0: <ISA Option ROM> at iomem 0xd2000-0xd4fff pnpid ORM0000 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounter "TSC-low" frequency 1705620393 Hz quality 800 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) [nl_generic] genl_register_family: Registered family nlctrl id 16 [nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed ugen6.1: <ATI OHCI root HUB> at usbus6 ugen7.1: <ATI EHCI root HUB> at usbus7 ugen5.1: <ATI OHCI root HUB> at usbus5 ugen4.1: <ATI EHCI root HUB> at usbus4 uhub0 on usbus6 uhub1 on usbus7 uhub2 on usbus4 uhub3 on usbus5 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen1.1: <ATI OHCI root HUB> at usbus1 ugen0.1: <(0x1033) XHCI root HUB> at usbus0 ugen3.1: <ATI OHCI root HUB> at usbus3 ugen2.1: <ATI EHCI root HUB> at usbus2 uhub4 on usbus1 uhub5 on usbus2 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub6 on usbus3 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <VIA VT1818S HDA CODEC> at cad 0 on hdac1 hdaa1: <VIA VT1818S Audio Function Group> at nid 1 on hdacc1 pcm2: <VIA VT1818S (Analog 7.1+HP/2.0)> at nid 28,34,25,35,29 and 26,30,27 on hdaa1 pcm3: <VIA VT1818S (HDMI)> at nid 32 on hdaa1 pcm4: <VIA VT1818S (Rear-panel Digital)> at nid 33 on hdaa1 Trying to mount root from zfs:rpool/ROOT/2023-06-25.1010 []... uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub7 on usbus0 uhub7: <(0x1033) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub3: 2 ports with 2 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub4: 5 ports with 5 removable, self powered uhub6: 5 ports with 5 removable, self powered uhub7: 4 ports with 4 removable, self powered ada0 at ahcich1 bus 0 scbus2 target 0 lun 0 ada0: <WDC WD1000DHTZ-04N21V1 04.06A01> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich2 bus 0 scbus3 target 0 lun 0 ada1: <WDC WD1000DHTZ-04N21V1 04.06A01> ATA8-ACS SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) ada2 at ahcich3 bus 0 scbus4 target 0 lun 0 ada2: <WDC WD40EFRX-68WT0N0 80.00A80> ACS-2 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich4 bus 0 scbus5 target 0 lun 0 ada3: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> cd0 at ahcich5 bus 0 scbus6 target 0 lun 0 cd0: <TSSTcorp CDDVDW SH-S223C SB06> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus2 usbus4 uhub2: 5 ports with 5 removable, self powered uhub5: 5 ports with 5 removable, self powered nvidia0: <GeForce GT 520> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.154 Wed Jun 22 04:42:19 UTC 2022 intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) bridge0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP pflog0: promiscuous mode enabled