Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2023-07-25 14:43:34
From: olgeni
Description: FreeBSD/amd64 on FUJITSU PRIMERGY TX1320 M3
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 BSDKIT amd64
FreeBSD clang version 14.0.5 ( llvmorg-14.0.5-0-gc12386ae247c)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz (3000.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906e9  Family=0x6  Model=0x9e  Stepping=9
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
  TSC: P-state invariant, performance statistics
real memory  = 68719476736 (65536 MB)
avail memory = 66668580864 (63580 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <FUJ    D3373-B1>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 2 1 3
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x8eef1000-0x8eef101e
smbios0: Version: 3.0, BCD Revision: 3.0
acpi0: <FUJ D3373-B1>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdfe00000-0xdfe0ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xdfe10000-0xdfe11fff,0xdfe1e000-0xdfe1e0ff,0xdfe1d000-0xdfe1d7ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xde000000-0xdeffffff,0xdf820000-0xdf823fff,0xdf000000-0xdf7fffff at device 0.0 on pci1
pci1: <processor> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) I210 (Copper)> port 0xe000-0xe01f mem 0xdfd00000-0xdfd7ffff,0xdfd80000-0xdfd83fff at device 0.0 on pci2
igb0: EEPROM V3.25-0 eTrack 0x80000603
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: xx:xx:xx:xx:xx:xx
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci3: <ACPI PCI bus> on pcib3
igb1: <Intel(R) I210 (Copper)> port 0xd000-0xd01f mem 0xdfc00000-0xdfc7ffff,0xdfc80000-0xdfc83fff at device 0.0 on pci3
igb1: EEPROM V3.25-0 eTrack 0x80000604
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 4 RX queues 4 TX queues
igb1: Using MSI-X interrupts with 5 vectors
igb1: Ethernet address: xx:xx:xx:xx:xx:xx
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib4: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci4: <ACPI PCI bus> on pcib4
ppt0 mem 0xdfa80000-0xdfafffff,0xdfb0c000-0xdfb0ffff at device 0.0 on pci4
ppt1 mem 0xdfa00000-0xdfa7ffff,0xdfb08000-0xdfb0bfff at device 0.1 on pci4
ppt2 mem 0xdf980000-0xdf9fffff,0xdfb04000-0xdfb07fff at device 0.2 on pci4
ppt3 mem 0xdf900000-0xdf97ffff,0xdfb00000-0xdfb03fff at device 0.3 on pci4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
Timecounter "TSC-low" frequency 1499999962 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
[nl_generic] genl_register_family: Registered family nlctrl id 16
[nl_generic] genl_register_cmds: Adding cmd GETFAMILY(3) to family nlctrl
WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed
Trying to mount root from zfs:rpool/ROOT/2023-04-19.2111 []...
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GUD0N GF01> Removable CD-ROM SCSI device
cd0: Serial Number xxxxxxxx
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ses0: (none) in 'Slot 00', SATA Slot: scbus0 target 0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 870 EVO 1TB SVT02B6Q> ACS-4 ATA SATA 3.x device
ada0: Serial Number xxxxxxxx
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ses0: (none) in 'Slot 01', SATA Slot: scbus1 target 0
ses0: cd0 in 'Slot 04', SATA Slot: scbus4 target 0
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Samsung SSD 870 EVO 1TB SVT02B6Q> ACS-4 ATA SATA 3.x device
ada1: Serial Number xxxxxxxx
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
Root mount waiting for: usbus0
uhub0: 26 ports with 26 removable, self powered
Dual Console: Video Primary, Serial Secondary
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
ipmi0: IPMI device rev. 2, firmware rev. 1.00, version 2.0, device support mask 0xbf
ipmi0: Number of channels 1
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xdfe21000-0xdfe21fff at device 20.2 on pci0
ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf000-0xf01f mem 0xdfe1c000-0xdfe1c0ff at device 31.4 on pci0
smbus0: <System Management Bus> on ichsmb0
bridge0: Ethernet address: xx:xx:xx:xx:xx:xx
bridge1: Ethernet address: xx:xx:xx:xx:xx:xx
bridge2: Ethernet address: xx:xx:xx:xx:xx:xx
bridge3: Ethernet address: xx:xx:xx:xx:xx:xx
bridge4: Ethernet address: xx:xx:xx:xx:xx:xx
bridge5: Ethernet address: xx:xx:xx:xx:xx:xx
bridge6: Ethernet address: xx:xx:xx:xx:xx:xx
bridge7: Ethernet address: xx:xx:xx:xx:xx:xx
bridge1: changing name to 'opnsense0'
bridge2: changing name to 'ms_bridge'
bridge3: changing name to 'sky_bridge_01'
bridge4: changing name to 'service'
bridge5: changing name to 'data_io'
bridge6: changing name to 'content'
bridge7: changing name to 'sky_bridge_02'
lo0: link state changed to UP
bridge0: link state changed to UP
igb1: promiscuous mode enabled
vlan314: promiscuous mode enabled
service: link state changed to UP
vlan315: promiscuous mode enabled
data_io: link state changed to UP
vlan317: promiscuous mode enabled
content: link state changed to UP
igb0: promiscuous mode enabled
igb0: link state changed to UP
vlan314: link state changed to UP
vlan315: link state changed to UP
vlan317: link state changed to UP
igb1: link state changed to UP