Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-08-04 10:54:46
From: ocb
Description: NetBSD/amd64 9.2 QEMU
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.2 (KERNEL1VM) #2: Sun Jul 10 17:11:03 CEST 2022 [ 1.000000] root@dc:/usr/kernel/obj/sys/arch/amd64/compile/KERNEL1VM [ 1.000000] total memory = 2047 MB [ 1.000000] avail memory = 1970 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] Red Hat KVM (RHEL 7.6.0 PC (i440FX + PIIX, 1996)) [ 1.000003] mainbus0 (root) [ 1.000003] Firmware Error (ACPI): A valid RSDP was not found (20190405/tbxfroot-261) [ 1.000003] autoconfiguration error: acpi_probe: failed to initialize tables [ 1.000003] ACPI Error: Could not remove SCI handler (20190405/evmisc-312) [ 1.000003] mainbus0: Intel MP Specification (Version 1.4) (BOCHSCPU 0.1 ) [ 1.000003] cpu0 at mainbus0 apid 0 [ 1.000003] cpu0: QEMU Virtual CPU version 2.5+, id 0x6d3 [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] cpu1 at mainbus0 apid 1 [ 1.000003] cpu1: QEMU Virtual CPU version 2.5+, id 0x6d3 [ 1.000003] cpu1: package 1, core 0, smt 0 [ 1.000003] mpbios: bus 0 is type PCI [ 1.000003] mpbios: bus 1 is type ISA [ 1.000003] ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x11, 24 pins [ 1.000003] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.000003] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000003] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.000003] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.000003] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.000003] piixide0: bus-master DMA support present [ 1.000003] piixide0: primary channel wired to compatibility mode [ 1.000003] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.000003] atabus0 at piixide0 channel 0 [ 1.000003] piixide0: secondary channel wired to compatibility mode [ 1.000003] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.000003] atabus1 at piixide0 channel 1 [ 1.000003] uhci0 at pci0 dev 1 function 2: vendor 8086 product 7020 (rev. 0x01) [ 1.000003] uhci0: interrupting at ioapic0 pin 11 [ 1.000003] usb0 at uhci0: USB revision 1.0 [ 1.000003] vga0 at pci0 dev 2 function 0: vendor 1013 product 00b8 (rev. 0x00) [ 1.000003] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) [ 1.000003] wsmux1: connecting to wsdisplay0 [ 1.000003] drm at vga0 not configured [ 1.000003] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03) [ 1.000003] wm0: interrupting at ioapic0 pin 11 [ 1.000003] wm0: 32-bit 33MHz PCI bus [ 1.000003] wm0: 64 words (6 address bits) MicroWire EEPROM [ 1.000003] wm0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000003] wm0: 0x200402<LOCK_EECD,IOH_VALID,WOL> [ 1.000003] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0 [ 1.000003] makphy0: Failed to access EADR. Are you an emulator? [ 1.000003] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] vendor 1af4 product 1002 (prehistoric, subclass 0xff) at pci0 dev 4 function 0 not configured [ 1.000003] isa0 at pcib0 [ 1.000003] pckbc0 at isa0 port 0x60-0x64 [ 1.000003] pckbd0 at pckbc0 (kbd slot) [ 1.000003] pckbc0: using irq 1 for kbd slot [ 1.000003] wskbd0 at pckbd0: console keyboard, using wsdisplay0 [ 1.000003] pms0 at pckbc0 (aux slot) [ 1.000003] pckbc0: using irq 12 for aux slot [ 1.000003] wsmouse at pms0 not configured [ 1.000003] attimer0 at isa0 port 0x40-0x43 [ 1.000003] pcppi0 at isa0 port 0x61 [ 1.000003] midi0 at pcppi0: PC speaker [ 1.000003] sysbeep0 at pcppi0 [ 1.000003] attimer0: attached to pcppi0 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.133085] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.133085] uhub0: 2 ports with 2 removable, self powered [ 4.116982] wd0 at atabus0 drive 0 [ 4.116982] wd0: <QEMU HARDDISK> [ 4.116982] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 4.116982] wd0: 30720 MB, 62415 cyl, 16 head, 63 sec, 512 bytes/sect x 62914560 sectors [ 4.116982] wd0: GPT GUID: 72b5d060-fcd7-4d95-8271-e0d8e77c6d97 [ 4.126977] dk0 at wd0: "cgd.conf", 262144 blocks at 4096, type: ffs [ 4.126977] dk1 at wd0: "syscgd", 62644224 blocks at 266240, type: cgd [ 4.126977] wd0: 32-bit data port [ 4.126977] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 4.137180] wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) [ 4.137180] atapibus at atabus1 not configured [ 4.137180] WARNING: 1 error while detecting hardware; check system log. [ 4.177170] boot device: wd0 [ 4.177170] md0: internal 5000 KB image area [ 4.177170] root on md0a dumps on md0b [ 4.177170] root file system type: ffs [ 4.187331] kern.module.path=/stand/amd64/9.2/modules [ 4.187331] WARNING: clock gained 813 days [ 3927.100108] /altroot/: replaying log to memory [ 3927.450578] /altroot: replaying log to disk [ 3934.970367] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 3934.980382] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 3934.980382] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 3934.980382] wsdisplay0: screen 4 added (80x25, vt100 emulation)