Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-08-11 17:25:28
From: xzk7
Description: Fujitsu Primergy RX2530 M1
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) VT(efifb): resolution 1024x768 CPU: Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz (2594.10-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 206158430208 (196608 MB) avail memory = 200432349184 (191147 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <FUJ D3279-A1> FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. ioapic0 <Version 2.0> irqs 0-23 ioapic1 <Version 2.0> irqs 24-47 ioapic2 <Version 2.0> irqs 48-71 Launching APs: 1 23 28 12 22 6 29 31 14 24 19 9 20 10 4 11 21 15 25 26 30 2 5 17 16 13 27 7 3 8 18 random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xf0560-0xf057e smbios0: Version: 2.8, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <FUJ D3279-A1> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 Event timer "HPET4" frequency 14318180 Hz quality 340 Event timer "HPET5" frequency 14318180 Hz quality 340 Event timer "HPET6" frequency 14318180 Hz quality 340 Event timer "HPET7" frequency 14318180 Hz quality 340 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <dasp, performance counters> at device 8.2 (no driver attached) pci0: <dasp, performance counters> at device 11.1 (no driver attached) pci0: <dasp, performance counters> at device 11.2 (no driver attached) pci0: <dasp, performance counters> at device 16.1 (no driver attached) pci0: <dasp, performance counters> at device 16.6 (no driver attached) pci0: <dasp, performance counters> at device 18.1 (no driver attached) pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 pci1: <dasp, performance counters> at device 8.2 (no driver attached) pci1: <dasp, performance counters> at device 11.1 (no driver attached) pci1: <dasp, performance counters> at device 11.2 (no driver attached) pci1: <dasp, performance counters> at device 16.1 (no driver attached) pci1: <dasp, performance counters> at device 16.6 (no driver attached) pci1: <dasp, performance counters> at device 18.1 (no driver attached) acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 acpi_syscontainer2: <System Container> on acpi0 acpi_syscontainer3: <System Container> on acpi0 apei0: <ACPI Platform Error Interface> on acpi0 pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0 pci2: <ACPI PCI bus> numa-domain 0 on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 numa-domain 0 on pci2 pci3: <ACPI PCI bus> numa-domain 0 on pcib3 mpr0: <Avago Technologies (LSI) SAS3008> port 0x6000-0x60ff mem 0xc7c40000-0xc7c4ffff,0xc7c00000-0xc7c3ffff irq 26 at device 0.0 numa-domain 0 on pci3 mpr0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray> pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 numa-domain 0 on pci2 pci4: <ACPI PCI bus> numa-domain 0 on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci2 pci5: <ACPI PCI bus> numa-domain 0 on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 40 at device 3.2 numa-domain 0 on pci2 pci6: <ACPI PCI bus> numa-domain 0 on pcib6 pci6: <network, ethernet> at device 0.0 (no driver attached) pci6: <network, ethernet> at device 0.1 (no driver attached) pci6: <network, ethernet> at device 0.2 (no driver attached) pci6: <network, ethernet> at device 0.3 (no driver attached) pci2: <unknown> at device 17.0 (no driver attached) ahci0: <Intel Wellsburg AHCI SATA controller> port 0x7110-0x7117,0x7100-0x7103,0x70f0-0x70f7,0x70e0-0x70e3,0x7020-0x703f mem 0xc7d18000-0xc7d187ff irq 16 at device 17.4 numa-domain 0 on pci2 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xc7d00000-0xc7d0ffff irq 19 at device 20.0 numa-domain 0 on pci2 xhci0: 32 bytes context size, 64-bit DMA usbus0 numa-domain 0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci2: <simple comms> at device 22.0 (no driver attached) pci2: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xc7d14000-0xc7d143ff irq 18 at device 26.0 numa-domain 0 on pci2 usbus1: EHCI version 1.0 usbus1 numa-domain 0 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib7: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci2 pci7: <ACPI PCI bus> numa-domain 0 on pcib7 pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.3 numa-domain 0 on pci2 pci8: <ACPI PCI bus> numa-domain 0 on pcib8 vgapci0: <VGA-compatible display> mem 0xc5000000-0xc5ffffff,0xc7820000-0xc7823fff,0xc7000000-0xc77fffff irq 19 at device 0.0 numa-domain 0 on pci8 vgapci0: Boot video device pci8: <processor> at device 0.1 (no driver attached) ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xc7d13000-0xc7d133ff irq 18 at device 29.0 numa-domain 0 on pci2 usbus2: EHCI version 1.0 usbus2 numa-domain 0 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2 isa0: <ISA bus> numa-domain 0 on isab0 ahci1: <Intel Wellsburg AHCI SATA controller> port 0x7070-0x7077,0x7060-0x7063,0x7050-0x7057,0x7040-0x7043,0x7000-0x701f mem 0xc7d12000-0xc7d127ff irq 16 at device 31.2 numa-domain 0 on pci2 ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 0 on ahci1 ahcich5: <AHCI channel> at channel 1 on ahci1 ahcich6: <AHCI channel> at channel 2 on ahci1 ahcich7: <AHCI channel> at channel 3 on ahci1 ahcich8: <AHCI channel> at channel 4 on ahci1 ahcich9: <AHCI channel> at channel 5 on ahci1 ahciem1: <AHCI enclosure management bridge> on ahci1 pcib9: <ACPI Host-PCI bridge> numa-domain 1 on acpi0 pci9: <ACPI PCI bus> numa-domain 1 on pcib9 pcib10: <ACPI PCI-PCI bridge> irq 56 at device 2.0 numa-domain 1 on pci9 pci10: <ACPI PCI bus> numa-domain 1 on pcib10 igb0: <Intel(R) I350 (Copper)> mem 0xfbd00000-0xfbdfffff,0xfbe84000-0xfbe87fff irq 56 at device 0.0 numa-domain 1 on pci10 igb0: EEPROM V1.63-0 eTrack 0x80000c51 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 8 RX queues 8 TX queues igb0: Using MSI-X interrupts with 9 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <Intel(R) I350 (Copper)> mem 0xfbc00000-0xfbcfffff,0xfbe80000-0xfbe83fff irq 60 at device 0.1 numa-domain 1 on pci10 igb1: EEPROM V1.63-0 eTrack 0x80000c51 igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 8 RX queues 8 TX queues igb1: Using MSI-X interrupts with 9 vectors igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 8/1024, RX 8/1024 acpi_button0: <Power Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) acpi_syscontainer4: <System Container> on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcf7ff,0xcf800-0xd0fff,0xd1000-0xd27ff,0xd2800-0xd3fff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1296996783 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: <Intel XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0 numa-domain 0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1 numa-domain 0 on usbus2 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0009> enclosureHandle<0x0001> slot 4 mpr0: At enclosure level 0 and connector name ( ) mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x000a> enclosureHandle<0x0001> slot 5 mpr0: At enclosure level 0 and connector name ( ) ses0 at ahciem0 bus 0 scbus5 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses1 at ahciem1 bus 0 scbus12 target 0 lun 0 ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses1: SEMB SES Device da0 at mpr0 bus 0 scbus0 target 4 lun 0 da0: <ATA SanDisk SDSSDH3 1000> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXX] da0: 600.000MB/s transfers da0: Command Queueing enabled da0: 488386MB (1000215216 512 byte sectors) da1 at mpr0 bus 0 scbus0 target 5 lun 0 da1: <ATA SanDisk SDSSDH35 7000> Fixed Direct Access SPC-4 SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXX] da1: 600.000MB/s transfers da1: Command Queueing enabled da1: 488386MB (1000215216 512 byte sectors) GEOM: da0: invalid disklabel. Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... uhub2 numa-domain 0 on usbus1 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 GEOM: diskid/DISK-191202446504: invalid disklabel. GEOM: da1s1: invalid disklabel. GEOM: diskid/DISK-191757800194s1: invalid disklabel. uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 21 ports with 21 removable, self powered Root mount waiting for: usbus0 usbus1 usbus2 ugen2.2: <vendor 0x8087 product 0x8002> at usbus2 uhub3 numa-domain 0 on uhub1 uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ugen0.2: <YICHIP Wireless Device> at usbus0 ukbd0 numa-domain 0 on uhub0 ukbd0: <YICHIP Wireless Device, class 0/0, rev 2.00/0.02, addr 1> on usbus0 kbd1 at ukbd0 ugen1.2: <vendor 0x8087 product 0x800a> at usbus1 uhub4 numa-domain 0 on uhub2 uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1 uhub3: 8 ports with 8 removable, self powered uhub4: 6 ports with 6 removable, self powered ugen0.3: <vendor 0x0424 product 0x2533> at usbus0 uhub5 numa-domain 0 on uhub0 uhub5: <vendor 0x0424 product 0x2533, class 9/0, rev 2.01/1.82, addr 2> on usbus0 uhub5: MTT enabled uhub5: 3 ports with 3 removable, self powered Root mount waiting for: usbus0 ugen0.4: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 ukbd1 numa-domain 0 on uhub0 ukbd1: <Keyboard Interface> on usbus0 kbd2 at ukbd1 ugen0.5: <USB SanDisk 3.2Gen1> at usbus0 umass0 numa-domain 0 on uhub0 umass0: <USB SanDisk 3.2Gen1, class 0/0, rev 3.20/1.00, addr 4> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x4001 umass0:13:0: Attached to scbus13 mountroot: waiting for device /dev/ufs/FreeBSD_Install... da2 at umass-sim0 bus 0 scbus13 target 0 lun 0 da2: <USB SanDisk 3.2Gen1 1.00> Removable Direct Access SPC-4 SCSI device da2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX] da2: 400.000MB/s transfers da2: 238464MB (488374272 512 byte sectors) da2: quirks=0x2<NO_6_BYTE> random: unblocking device. Dual Console: Video Primary, Serial Secondary ichsmb0: <Intel Wellsburg SMBus controller> port 0x580-0x59f mem 0xc7d11000-0xc7d110ff irq 18 at device 31.3 numa-domain 0 on pci2 smbus0: <System Management Bus> numa-domain 0 on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device lo0: link state changed to UP igb1: link state changed to UP ums0 numa-domain 0 on uhub0 ums0: <YICHIP Wireless Device, class 0/0, rev 2.00/0.02, addr 1> on usbus0 ums0: 5 buttons and [XYZT] coordinates ID=1 ums1 numa-domain 0 on uhub0 ums1: <Mouse Interface> on usbus0 ums1: 3 buttons and [Z] coordinates ID=0