Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-09-07 21:34:09
From: vezhlys
Description: VT859ID MB based on VIA VN1000 chipset/Nano X2 U4300 CPU
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.99.7 (GENERIC) #4: Sun Aug 6 12:16:10 EEST 2023
andriusv@agraphic-pc:/home/andriusv/obj/sys/arch/amd64/compile/GENERIC
total memory = 3839 MB
avail memory = 3686 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
RTC BIOS diagnostic error 0xa<fixed_disk>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F95D0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000CFFA0100 00005C (v01 101311 XSDT1411 20111013 MSFT 00000097)
ACPI: FACP 0x00000000CFFA0290 0000F4 (v04 101311 FACP1411 20111013 MSFT 00000097)
ACPI: DSDT 0x00000000CFFA04A0 005E4F (v02 8591A 8591A046 00000046 INTL 20051117)
ACPI: FACS 0x00000000CFFAE000 000040
ACPI: APIC 0x00000000CFFA0390 000078 (v02 101311 APIC1411 20111013 MSFT 00000097)
ACPI: MCFG 0x00000000CFFA0410 00003C (v01 101311 OEMMCFG 20111013 MSFT 00000097)
ACPI: TRDW 0x00000000CFFA0450 000047 (v01 101311 VT-8237S 20111013 MSFT 00000097)
ACPI: OEMB 0x00000000CFFAE040 000072 (v01 101311 OEMB1411 20111013 MSFT 00000097)
ACPI: HPET 0x00000000CFFAA4A0 000038 (v01 101311 VT-8237S 20111013 MSFT 00000097)
ACPI: SSDT 0x00000000CFFAE0C0 0008BB (v01 AMI P001PM 00000001 INTL 20051117)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 3: pa 0xfec00000, version 0x3, 24 pins
ioapic1 at mainbus0 apid 4: pa 0xfecc0000, version 0x3, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use cpuid to serialize rdtsc
cpu0: VIA Nano X2 U4300 @ 1.2+ GHz, id 0x6fc
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: VIA Nano X2 U4300 @ 1.2+ GHz, id 0x6fc
cpu1: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <101311,XSDT1411,20111013>, AslId <MSFT,00000097>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
NBPE (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (EUMA): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: brightness levels: [20,30,40,50,60,80,90,100]
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output Device
acpiout4 at acpivga0 (DP, 0x0280): ACPI Display Output Device
acpiout5 at acpivga0 (DP2, 0x02a0): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0: 0x0120 (acpiout3): Unknown Output Device, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpivga0: 0x0280 (acpiout4): Unknown Output Device, head 0, bios detect
acpivga0: 0x02a0 (acpiout5): Unknown Output Device, head 0, bios detect
acpiacad0 at acpi0 (ACDP, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, 16-byte FIFO
allocated pic ioapic0 type edge pin 4 level 8 to cpu0 slot 1 idt entry 129
lpt0 at acpi0 (LPT, PNP0400): io 0x378-0x37f irq 7
allocated pic ioapic0 type edge pin 7 level 6 to cpu0 slot 2 idt entry 97
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
RMEM (PNP0C01) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 1 GPEs in block 10 to 2F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: VIA Technologies product 0419 (rev. 0x80)
pchb1 at pci0 dev 0 function 1: VIA Technologies product 1419 (rev. 0x00)
pchb2 at pci0 dev 0 function 2: VIA Technologies product 2419 (rev. 0x00)
pchb3 at pci0 dev 0 function 3: VIA Technologies product 3419 (rev. 0x00)
pchb4 at pci0 dev 0 function 4: VIA Technologies product 4419 (rev. 0x00)
VIA Technologies product 5419 (interrupt system, IO(x) APIC) at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6: VIA Technologies product 6419 (rev. 0x00)
pchb6 at pci0 dev 0 function 7: VIA Technologies product 7419 (rev. 0x00)
vga0 at pci0 dev 1 function 0: VIA Technologies product 6122 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
allocated pic msi0 type edge pin 0 level 7 to cpu0 slot 16 idt entry 112
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: vendor 5333 product 9f82
hdafg0: DP00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz PCM16 AC3
audio0 at hdafg0: playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 2 function 0: VIA Technologies product a419 (rev. 0x00)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
pchb7 at pci0 dev 2 function 4: VIA Technologies product b419 (rev. 0x00)
ppb1 at pci0 dev 3 function 0: VIA Technologies product c419 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 1: VIA Technologies product d419 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 3 function 2: VIA Technologies product e419 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 3 function 3: VIA Technologies product f419 (rev. 0x00)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 6
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vge0 at pci5 dev 0 function 0: VIA VT612X Gigabit Ethernet (rev. 0x82)
allocated pic ioapic1 type level pin 16 level 6 to cpu0 slot 3 idt entry 98
vge0: interrupting at ioapic1 pin 16
vge0: Ethernet address [_MAC_XXXXXXXXXX]
ipgphy0 at vge0 phy 22: IP1001 10/100/1000 PHY, rev. 0
ipgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci0 at pci0 dev 15 function 0: VIA Technologies VT83C572 USB Controller (rev. 0xb0)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 4 idt entry 99
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 15 function 1: VIA Technologies VT83C572 USB Controller (rev. 0xb0)
allocated pic ioapic0 type level pin 17 level 6 to cpu0 slot 5 idt entry 100
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 15 function 2: VIA Technologies VT83C572 USB Controller (rev. 0xb0)
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 6 idt entry 101
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 15 function 7: VIA Technologies VT8237 EHCI USB Controller (rev. 0x90)
ehci0: 32-bit DMA
allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 7 idt entry 102
ehci0: interrupting at ioapic0 pin 19
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
ehci0: Using DMA subregion for control data structures
usb3 at ehci0: USB revision 2.0
uhci3 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0xb0)
allocated pic ioapic0 type level pin 20 level 6 to cpu0 slot 8 idt entry 103
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0xb0)
allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 9 idt entry 104
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0xb0)
allocated pic ioapic0 type level pin 22 level 6 to cpu0 slot 10 idt entry 105
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 16 function 7: VIA Technologies VT8237 EHCI USB Controller (rev. 0x90)
ehci1: 32-bit DMA
allocated pic ioapic0 type level pin 23 level 6 to cpu0 slot 11 idt entry 106
ehci1: interrupting at ioapic0 pin 23
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci3 uhci4 uhci5
ehci1: Using DMA subregion for control data structures
usb7 at ehci1: USB revision 2.0
pcib0 at pci0 dev 17 function 0: VIA Technologies product 3402 (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies unknown VIA ATA controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 14 level 6 to cpu0 slot 12 idt entry 107
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
pciide0 at pci0 dev 17 function 2: VIA Technologies product 9000 (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 9 idt entry 104
pciide0: using ioapic0 pin 21 for native-PCI interrupt
atabus1 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus2 at pciide0 channel 1
VIA Technologies product 9530 (flash memory, revision 0x40) at pci0 dev 17 function 4 not configured
VIA Technologies product 9530 (flash memory, revision 0x40) at pci0 dev 17 function 5 not configured
pchb8 at pci0 dev 17 function 7: VIA Technologies VT8251 Ultra VLINK Controller (rev. 0x00)
ppb5 at pci0 dev 19 function 0: VIA Technologies VT8237A PCI-PCI Bridge (rev. 0x00)
pci6 at ppb5 bus 7
pci6: i/o space, memory space enabled
fwohci0 at pci6 dev 7 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0xc0)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 4 idt entry 99
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:46:a3
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
hdaudio1 at pci0 dev 20 function 0: HD Audio Controller
allocated pic msi1 type edge pin 0 level 7 to cpu0 slot 17 idt entry 113
hdaudio1: interrupting at msi1 vec 0
hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg1 at hdaudio1: VIA VT1708S
hdafg1: DAC00 8ch: Speaker [Jack], HP Out [Jack]
hdafg1: ADC01 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: 8ch/2ch 48000Hz PCM16*
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr2 at audio1: PC Speaker (synthesized)
wsbell at spkr2 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: I/O, lat 50 us, pow 750 mW
acpicpu0: C3: I/O, lat 80 us, pow 500 mW
acpicpu0: P0: FFH, lat 20 us, pow 2934 mW, 1467 MHz
acpicpu0: P1: FFH, lat 20 us, pow 2668 mW, 1334 MHz
acpicpu0: P2: FFH, lat 20 us, pow 2400 mW, 1200 MHz
acpicpu0: P3: FFH, lat 20 us, pow 2134 mW, 1067 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 94 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 82 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 70 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 58 %
acpicpu0: T8: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T9: I/O, lat 1 us, pow 0 mW, 46 %
acpicpu0: T10: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T11: I/O, lat 1 us, pow 0 mW, 34 %
acpicpu0: T12: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T13: I/O, lat 1 us, pow 0 mW, 22 %
acpicpu0: T14: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu0: T15: I/O, lat 1 us, pow 0 mW, 10 %
acpicpu1 at cpu1: ACPI CPU
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "lapic" frequency 266017000 Hz quality -100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1463094000 Hz quality -100
acpibat0: VIA LION rechargeable battery
acpibat0: granularity: low->warn 0.016 Ah, warn->full 0.016 Ah
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: ADATA (0x125f) ADATA USB Flash Drive (0xdd1a), rev 2.10/11.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <ADATA, USB Flash Drive, 1100> disk removable
sd0: fabricating a geometry
sd0: 29600 MB, 29600 cyl, 64 head, 32 sec, 512 bytes/sect x 60620800 sectors
sd0: fabricating a geometry
ehci0: handing over low speed device on port 3 to uhci1
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
swwdog0: software watchdog initialized
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/amd64/10.99.7/modules
WARNING: NVRAM century is 20 but RTC year is 1999
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1
uhidev1: CASUE (0x2a7a) CASUE USB Keyboard (0x9a18), rev 1.10/0.01, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)