Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2023-11-17 06:17:12
From: mitsu
Description: FreeBSD/amd64 on Dell Inc. XPS 8500
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(efifb): resolution 800x600
CPU: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (3395.82-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16516128768 (15751 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL FX09 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 2 3
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de
smbios0: Version: 2.7, BCD Revision: 2.7
aesni0: No AES or SHA support.
acpi0: <DELL FX09 >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7e00000-0xf7e0ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7e18000-0xf7e183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac0: <Intel Panther Point HDA Controller> mem 0xf7e10000-0xf7e13fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7dc0000-0xf7ddffff,0xf7d00000-0xf7d7ffff,0xf7de0000-0xf7de3fff irq 17 at device 0.0 on pci2
em0: EEPROM V1.8-0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using 2 RX queues 2 TX queues
em0: Using MSI-X interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7cc0000-0xf7cdffff,0xf7c00000-0xf7c7ffff,0xf7ce0000-0xf7ce3fff irq 18 at device 0.0 on pci3
em1: EEPROM V1.8-0
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using 2 RX queues 2 TX queues
em1: Using MSI-X interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci4
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7e17000-0xf7e173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e16000-0xf7e167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1697801337 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC887 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,26 on hdaa0
pcm1: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub1 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2 on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ahcich1 bus 0 scbus1 target 0 lun 0
ada0: <SAMSUNG SSD PM830 mSATA 256GB CXM13D1Q> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus1 target 0
uhub0: 8 ports with 8 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
Root mount waiting for:uhub3: 6 ports with 6 removable, self powered
usbus1 usbus2
uhub4: 8 ports with 8 removable, self powered
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
[drm] Got stolen memory base 0xdba00000, size 0x4000000
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic6: <LinuxKPI I2C> on drm3
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
[drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
pbase=0xe01d6000 vbase=0xfffff800e01d6000
name=drmn0 flags=0x0 stride=7680 bpp=32
end FB_INFO
ichsmb0: <Intel Panther Point SMBus controller> port 0xf040-0xf05f mem 0xf7e15000-0xf7e150ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
em0: link state changed to UP
em1: link state changed to UP
re0: link state changed to UP
lo0: link state changed to UP
em0: link state changed to DOWN
em1: link state changed to DOWN
re0: link state changed to DOWN