Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2023-11-25 22:39:06
From: jklos
Description: AMD Bulldozer FX-8150
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.0_RC1 (GENERIC) #0: Sat Nov 25 06:10:56 UTC 2023
[     1.000000] 	[_EMAIL_XXXXXXXXX]:/usr/obj-amd64/sys/arch/amd64/compile/GENERIC
[     1.000000] total memory = 65485 MB
[     1.000000] avail memory = 63340 MB
[     1.000000] timecounter: Timecounters tick every 10.000 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[     1.000004] efi: systbl at pa bea04f18
[     1.000004] mainbus0 (root)
[     1.000004] ACPI: RSDP 0x00000000BDE6C000 000024 (v02 ALASKA)
[     1.000004] ACPI: XSDT 0x00000000BDE6C070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[     1.000004] ACPI: FACP 0x00000000BDE72498 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[     1.000004] Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-688)
[     1.000004] ACPI: DSDT 0x00000000BDE6C160 006336 (v02 ALASKA A M I    00000000 INTL 20051117)
[     1.000004] ACPI: FACS 0x00000000BDE75080 000040
[     1.000004] ACPI: APIC 0x00000000BDE725A8 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[     1.000004] ACPI: FPDT 0x00000000BDE72648 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[     1.000004] ACPI: MCFG 0x00000000BDE72690 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[     1.000004] ACPI: HPET 0x00000000BDE726D0 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[     1.000004] ACPI: SSDT 0x00000000BDE72708 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[     1.000004] ACPI: IVRS 0x00000000BDE73E20 0000D0 (v01 AMD    RD890S   00202031 AMD  00000000)
[     1.000004] ACPI: 2 ACPI AML tables successfully acquired and loaded
[     1.000004] ioapic0 at mainbus0 apid 9: pa 0xfec00000, version 0x21, 24 pins
[     1.000004] ioapic1 at mainbus0 apid 10: pa 0xfec20000, version 0x21, 32 pins
[     1.000004] cpu0 at mainbus0 apid 16
[     1.000004] cpu0: Use mfence to serialize rdtsc
[     1.000004] cpu0: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu0: node 0, package 0, core 0, smt 0
[     1.000004] cpu1 at mainbus0 apid 17
[     1.000004] cpu1: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu1: node 0, package 0, core 1, smt 0
[     1.000004] cpu2 at mainbus0 apid 18
[     1.000004] cpu2: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu2: node 0, package 0, core 2, smt 0
[     1.000004] cpu3 at mainbus0 apid 19
[     1.000004] cpu3: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu3: node 0, package 0, core 3, smt 0
[     1.000004] cpu4 at mainbus0 apid 20
[     1.000004] cpu4: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu4: node 0, package 0, core 4, smt 0
[     1.000004] cpu5 at mainbus0 apid 21
[     1.000004] cpu5: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu5: node 0, package 0, core 5, smt 0
[     1.000004] cpu6 at mainbus0 apid 22
[     1.000004] cpu6: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu6: node 0, package 0, core 6, smt 0
[     1.000004] cpu7 at mainbus0 apid 23
[     1.000004] cpu7: AMD FX(tm)-8150 Eight-Core Processor           , id 0x600f12
[     1.000004] cpu7: node 0, package 0, core 7, smt 0
[     1.000004] acpi0 at mainbus0: Intel ACPICA 20221020
[     1.000004] acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
[     1.000004] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
[     1.000004] acpi0: SCI interrupting at int 9
[     1.000004] acpi0: fixed power button present
[     1.000004] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
[     1.018980] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[     1.018980] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[     1.107485] AMDN (PNP0C01) at acpi0 not configured
[     1.107485] com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
[     1.107485] com0: ns16550a, 16-byte FIFO
[     1.107485] com0: console
[     1.107485] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
[     1.107485] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[     1.107485] spkr0 at pcppi1: PC Speaker
[     1.107485] wsbell at spkr0 not configured
[     1.107485] midi0 at pcppi1: PC speaker
[     1.107485] sysbeep0 at pcppi1
[     1.107485] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
[     1.107485] acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
[     1.107485] acpiwmibus at acpiwmi0 not configured
[     1.107485] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
[     1.107485] RMEM (PNP0C01) at acpi0 not configured
[     1.107485] acpiwmi1 at acpi0 (WMIO, PNP0C14-0): ACPI WMI Interface
[     1.107485] acpiwmibus at acpiwmi1 not configured
[     1.107485] attimer1: attached to pcppi1
[     1.107485] pckbd0 at pckbc1 (kbd slot)
[     1.107485] pckbc1: using irq 1 for kbd slot
[     1.107485] wskbd0 at pckbd0 mux 1
[     1.107485] pci0 at mainbus0 bus 0: configuration mode 1
[     1.107485] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.107485] pchb0 at pci0 dev 0 function 0: ATI Technologies RD890 PCI Bridge GFX0 Port B (rev. 0x02)
[     1.107485] ATI Technologies RD890 IOMMU (IOMMU system) at pci0 dev 0 function 2 not configured
[     1.107485] ppb0 at pci0 dev 2 function 0: ATI Technologies RD890 PCI Express Bridge GPP Port B (rev. 0x00)
[     1.107485] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s
[     1.107485] pci1 at ppb0 bus 1
[     1.107485] pci1: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.107485] mfii0 at pci1 dev 0 function 0: "LSI MegaRAID SAS 9271-4i", firmware 23.34.0-0019, 1024MB cache
[     1.107485] mfii0: interrupting at ioapic1 pin 0
[     1.107485] mfii0: Max 256 VD support
[     1.107485] scsibus0 at mfii0: 64 targets, 8 luns per target
[     1.107485] ppb1 at pci0 dev 3 function 0: ATI Technologies RD890 PCI Express Bridge GPP Port C (rev. 0x00)
[     1.107485] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s
[     1.107485] ppb1: link is x8 @ 2.5GT/s
[     1.107485] pci2 at ppb1 bus 2
[     1.107485] pci2: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.107485] nouveau0 at pci2 dev 0 function 0: NVIDIA Quadro M2000 (rev. 0xa1)
[     1.107485] hdaudio0 at pci2 dev 0 function 1: HD Audio Controller
[     1.107485] hdaudio0: interrupting at ioapic1 pin 5
[     1.107485] hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 4, 64-bit
[     1.107485] hdafg0 at hdaudio0: NVIDIA product 0072
[     1.107485] hdafg0: DP00 8ch: Digital Out [Jack]
[     1.107485] hdafg0: DP01 8ch: Digital Out [Jack]
[     1.107485] hdafg0: DP02 8ch: Digital Out [Jack]
[     1.107485] hdafg0: DP03 8ch: Digital Out [Jack]
[     1.107485] hdafg0: 8ch/0ch 48000Hz PCM16*
[     1.107485] audio0 at hdafg0: playback, capture, full duplex, independent
[     1.107485] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[     1.107485] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[     1.107485] spkr1 at audio0: PC Speaker (synthesized)
[     1.107485] wsbell at spkr1 not configured
[     1.107485] ppb2 at pci0 dev 5 function 0: ATI Technologies RD890 PCI Express Bridge GPP Port E (rev. 0x00)
[     1.107485] ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.107485] ppb2: link is x1 @ 2.5GT/s
[     1.107485] pci3 at ppb2 bus 3
[     1.107485] pci3: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.107485] re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
[     1.107485] re0: interrupting at ioapic1 pin 22
[     1.107485] re0: RTL8168E/8111E-VL (0x2c80)
[     1.107485] re0: Ethernet address [_MAC_XXXXXXXXXX]
[     1.107485] re0: using 256 tx descriptors
[     1.107485] rgephy0 at re0 phy 7: RTL8211E 1000BASE-T media interface
[     1.107485] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.107485] ppb3 at pci0 dev 7 function 0: ATI Technologies RD890 PCI Express Bridge GPP Port G (rev. 0x00)
[     1.107485] ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.107485] pci4 at ppb3 bus 4
[     1.107485] pci4: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.107485] xhci0 at pci4 dev 0 function 0: NEC Renesas Electronics USB 3.0 Host Controller (rev. 0x04)
[     1.107485] xhci0: 64-bit DMA
[     1.107485] xhci0: interrupting at ioapic1 pin 26
[     1.107485] xhci0: xHCI version 0.96
[     1.107485] usb0 at xhci0: USB revision 3.0
[     1.107485] usb1 at xhci0: USB revision 2.0
[     1.107485] ppb4 at pci0 dev 9 function 0: ATI Technologies RD890 PCI Express Bridge GPP Port H (rev. 0x00)
[     1.107485] ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[     1.107485] ppb4: link is x1 @ 2.5GT/s
[     1.107485] pci5 at ppb4 bus 5
[     1.107485] pci5: i/o space, memory space enabled, rd/line, wr/inv ok
[     1.107485] re1 at pci5 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x06)
[     1.107485] re1: interrupting at ioapic1 pin 24
[     1.107485] re1: RTL8168E/8111E (0x2c00)
[     1.107485] re1: Ethernet address [_MAC_XXXXXXXXXX]
[     1.107485] re1: using 256 tx descriptors
[     1.107485] rgephy1 at re1 phy 7: RTL8211D 1000BASE-T media interface
[     1.107485] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.107485] ahcisata0 at pci0 dev 17 function 0: ATI Technologies SB700-SB900 SATA Controller (AHCI mode) (rev. 0x40)
[     1.107485] ahcisata0: 64-bit DMA
[     1.107485] ahcisata0: ignoring broken port multiplier support
[     1.107485] ahcisata0: ignoring broken NCQ support
[     1.107485] ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xb730ff05<PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,S64A>
[     1.107485] ahcisata0: interrupting at ioapic0 pin 19
[     1.107485] atabus0 at ahcisata0 channel 0
[     1.107485] atabus1 at ahcisata0 channel 1
[     1.107485] atabus2 at ahcisata0 channel 2
[     1.107485] atabus3 at ahcisata0 channel 3
[     1.107485] atabus4 at ahcisata0 channel 4
[     1.107485] atabus5 at ahcisata0 channel 5
[     1.107485] ohci0 at pci0 dev 18 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
[     1.107485] ohci0: interrupting at ioapic0 pin 18
[     1.107485] ohci0: OHCI version 1.0, legacy support
[     1.107485] usb2 at ohci0: USB revision 1.0
[     1.107485] ehci0 at pci0 dev 18 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
[     1.107485] ehci0: 32-bit DMA
[     1.107485] ehci0: interrupting at ioapic0 pin 17
[     1.107485] ehci0: dropped intr workaround enabled
[     1.107485] ehci0: EHCI version 1.0
[     1.107485] ehci0: 1 companion controller, 5 ports: ohci0
[     1.107485] ehci0: Using DMA subregion for control data structures
[     1.107485] usb3 at ehci0: USB revision 2.0
[     1.107485] ohci1 at pci0 dev 19 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
[     1.107485] ohci1: interrupting at ioapic0 pin 18
[     1.107485] ohci1: OHCI version 1.0, legacy support
[     1.107485] usb4 at ohci1: USB revision 1.0
[     1.107485] ehci1 at pci0 dev 19 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
[     1.107485] ehci1: 32-bit DMA
[     1.107485] ehci1: interrupting at ioapic0 pin 17
[     1.107485] ehci1: dropped intr workaround enabled
[     1.107485] ehci1: EHCI version 1.0
[     1.107485] ehci1: 1 companion controller, 5 ports: ohci1
[     1.107485] ehci1: Using DMA subregion for control data structures
[     1.107485] usb5 at ehci1: USB revision 2.0
[     1.107485] piixpm0 at pci0 dev 20 function 0: ATI Technologies SBx00 SMBus Controller (rev. 0x42)
[     1.107485] piixpm0: interrupting at SMI, 
[     1.107485] iic0 at piixpm0 port 0: I2C bus
[     1.107485] iic1 at piixpm0 port 1: I2C bus
[     1.107485] iic2 at piixpm0 port 2: I2C bus
[     1.107485] iic3 at piixpm0 port 3: I2C bus
[     1.107485] hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
[     1.107485] hdaudio1: interrupting at ioapic0 pin 16
[     1.107485] hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
[     1.107485] hdafg1 at hdaudio1: Realtek ALC892
[     1.107485] hdafg1: DAC00 8ch: Speaker [Jack]
[     1.107485] hdafg1: DAC01 2ch: HP Out [Jack]
[     1.107485] hdafg1: DIG02 2ch: SPDIF Out [Jack]
[     1.107485] hdafg1: DIG03 2ch: SPDIF Out [Built-In]
[     1.107485] hdafg1: ADC04 2ch: Line In [Jack], Mic In [Jack]
[     1.107485] hdafg1: ADC05 2ch: Mic In [Jack]
[     1.107485] hdafg1: 8ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[     1.107485] audio1 at hdafg1: playback, capture, full duplex, independent
[     1.107485] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
[     1.107485] audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
[     1.107485] spkr2 at audio1: PC Speaker (synthesized)
[     1.107485] wsbell at spkr2 not configured
[     1.107485] pcib0 at pci0 dev 20 function 3: ATI Technologies SB700-SB900 LPC Host Controller (rev. 0x40)
[     1.107485] ppb5 at pci0 dev 20 function 4: ATI Technologies SBx00 PCI to PCI Bridge (rev. 0x40)
[     1.107485] pci6 at ppb5 bus 6
[     1.107485] pci6: i/o space, memory space enabled
[     1.107485] ohci2 at pci0 dev 20 function 5: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
[     1.107485] ohci2: interrupting at ioapic0 pin 18
[     1.107485] ohci2: OHCI version 1.0, legacy support
[     1.107485] usb6 at ohci2: USB revision 1.0
[     1.107485] ohci3 at pci0 dev 22 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
[     1.107485] ohci3: interrupting at ioapic0 pin 18
[     1.107485] ohci3: OHCI version 1.0, legacy support
[     1.107485] usb7 at ohci3: USB revision 1.0
[     1.107485] ehci2 at pci0 dev 22 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
[     1.107485] ehci2: 32-bit DMA
[     1.107485] ehci2: interrupting at ioapic0 pin 17
[     1.107485] ehci2: dropped intr workaround enabled
[     1.107485] ehci2: EHCI version 1.0
[     1.107485] ehci2: 1 companion controller, 4 ports: ohci3
[     1.107485] ehci2: Using DMA subregion for control data structures
[     1.107485] usb8 at ehci2: USB revision 2.0
[     1.107485] pchb1 at pci0 dev 24 function 0: AMD Family15h HyperTransport Configuration (rev. 0x00)
[     1.107485] pchb2 at pci0 dev 24 function 1: AMD Family15h Address Map Configuration (rev. 0x00)
[     1.107485] pchb3 at pci0 dev 24 function 2: AMD Family15h DRAM Configuration (rev. 0x00)
[     1.107485] amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
[     1.107485] amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family15h)
[     1.107485] pchb4 at pci0 dev 24 function 4: AMD Family15h Link Configuration (rev. 0x00)
[     1.107485] pchb5 at pci0 dev 24 function 5: AMD Family15h North Bridge Configuration (rev. 0x00)
[     1.107485] isa0 at pcib0
[     1.107485] acpicpu0 at cpu0: ACPI CPU
[     1.107485] acpicpu0: C1: HLT, lat   0 us, pow     0 mW
[     1.107485] acpicpu0: C2: I/O, lat 100 us, pow     0 mW
[     1.107485] acpicpu0: P0: FFH, lat   4 us, pow 15192 mW, 3600 MHz
[     1.107485] acpicpu0: P1: FFH, lat   4 us, pow 13382 mW, 3300 MHz
[     1.107485] acpicpu0: P2: FFH, lat   4 us, pow  9337 mW, 2700 MHz
[     1.107485] acpicpu0: P3: FFH, lat   4 us, pow  6418 mW, 2100 MHz
[     1.107485] acpicpu0: P4: FFH, lat   4 us, pow  3993 mW, 1400 MHz
[     1.107485] acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
[     1.107485] acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  88 %
[     1.107485] acpicpu0: T2: I/O, lat   1 us, pow     0 mW,  76 %
[     1.107485] acpicpu0: T3: I/O, lat   1 us, pow     0 mW,  64 %
[     1.107485] acpicpu0: T4: I/O, lat   1 us, pow     0 mW,  52 %
[     1.107485] acpicpu0: T5: I/O, lat   1 us, pow     0 mW,  40 %
[     1.107485] acpicpu0: T6: I/O, lat   1 us, pow     0 mW,  28 %
[     1.107485] acpicpu0: T7: I/O, lat   1 us, pow     0 mW,  16 %
[     1.107485] acpicpu1 at cpu1: ACPI CPU
[     1.107485] acpicpu2 at cpu2: ACPI CPU
[     1.107485] acpicpu3 at cpu3: ACPI CPU
[     1.107485] acpicpu4 at cpu4: ACPI CPU
[     1.107485] acpicpu5 at cpu5: ACPI CPU
[     1.107485] acpicpu6 at cpu6: ACPI CPU
[     1.107485] acpicpu7 at cpu7: ACPI CPU
[     1.107485] ohci1: 1 scheduling overruns
[     1.107485] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[     1.561328] timecounter: Timecounter "TSC" frequency 3600111000 Hz quality 3000
[     1.562853] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[     1.661337] uhub0: 2 ports with 2 removable, self powered
[     1.661337] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[     1.771356] uhub1: 2 ports with 2 removable, self powered
[     1.771356] scsibus0: waiting 2 seconds for devices to settle...
[     1.841327] mfii0: physical disk inserted id 5 enclosure 252
[     1.911337] uhub2 at usb8mfii0: physical disk inserted id 7 enclosure 252
[     1.991337] : NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     2.091327] uhub2: 4 ports with 4 removable, self powered
[     2.091327] uhub3 at usb4: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     2.191327] uhub3: 5 ports with 5 removable, self powered
[     2.191327] ahcisata0 port 0: device present, speed: 6.0Gb/s
[     2.261327] uhub4 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     2.371326] uhub4: 5 ports with 5 removable, self powered
[     2.371326] uhub5 at usb5: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[     2.481327] uhub5: 5 ports with 5 removable, self powered
[     2.481327] uhub6 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     2.591335] uhub6: 5 ports with 5 removable, self powered
[     2.591335] uhub7 at usb7: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     2.691326] uhub7: 4 ports with 4 removable, self powered
[     2.691326] uhub8 at usb6: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[     2.801326] uhub8: 2 ports with 2 removable, self powered
[     2.811328] IPsec: Initialized Security Association Processing.
[     3.821331] wd0 at atabus0 drive 0
[     3.861326] wd0: <SATA SSD>
[     3.901326] wd0: drive supports 16-sector PIO transfers, LBA48 addressing
[     3.901326] wd0: 476 GB, 992277 cyl, 16 head, 63 sec, 512 bytes/sect x 1000215216 sectors
[     3.991326] wd0: GPT GUID: 3ff6fe81-fae9-4824-9c3d-5b57222113c5
[     3.991326] dk0 at wd0: "doozerssdroot", 865996800 blocks at 2048, type: ffs
[     4.081325] dk1 at wd0: "doozerssdswap", 134216192 blocks at 865998848, type: swap
[     4.171325] sd0 at scsibus0 target 0 lun 0: <LSI, MR9271-4i, 3.46> disk fixed
[     4.257646] sd0: fabricating a geometry
[     4.305485] sd0: 13037 GB, 13350486 cyl, 64 head, 32 sec, 512 bytes/sect x 27341795328 sectors
[     4.406363] wd0: drive supports PIO mode 4sd0: fabricating a geometry
[     4.438602] , DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
[     4.438602] wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
[     4.461325] sd0: GPT GUID: 6ab1ac4c-42c6-4007-92d7-320191feca12
[     4.461325] dk2 at sd0: "f7a99819-442a-44f6-965c-b1a588fd7d13", 262144 blocks at 2048, type: msdos
[     4.566725] dk3 at sd0: "doozerroot", 27207313408 blocks at 264192, type: ffs
[     4.652003] dk4 at sd0: "doozerswap", 134217695 blocks at 27207577600, type: swap
[     4.741439] sd0: tagged queueing
[     7.321328] entropy: best effort
[    24.821313] umass0 at uhub4 port 5 configuration 1 interface 0
[    24.891311] umass0: General (0xabcd) UDisk (0x1234), rev 2.00/1.00, addr 2
[    24.971311] umass0: using SCSI over Bulk-Only
[    24.971311] scsibus1 at umass0: 2 targets, 1 lun per target
[    25.041312] sd1 at scsibus1 target 0 lun 0: <General, UDisk, 5.00> disk removable
[    25.141308] sd1: fabricating a geometry
[    25.181313] sd1: 120 MB, 120 cyl, 64 head, 32 sec, 512 bytes/sect x 245760 sectors
[    25.281308] sd1: fabricating a geometry
[    25.381313] swwdog0: software watchdog initialized
[    25.501308] boot device: sd0
[    25.531313] root on dk3 dumps on dk1
[    25.591313] root file system type: ffs
[    25.641313] kern.module.path=/stand/amd64/10.0/modules
[    25.704224] nouveau0: NVIDIA GM206 (126300a1)
[    25.841307] nouveau0: bios: version[_IP_XXXXXX].05
[    26.061313] nouveau0: interrupting at ioapic1 pin 4 (nouveau0)
[    26.137960] nouveau0: fb: 4096 MiB GDDR5
[    26.184759] nouveau0: autoconfiguration error: error: bus: MMIO write of 800000c8 FAULT at 10eb14 [ IBUS ]
[    26.311307] Zone  kernel: Available graphics memory: 9007199252249220 KiB
[    26.399408] Zone   dma32: Available graphics memory: 2097152 KiB
[    26.471306] nouveau0: DRM: VRAM: 4096 MiB
[    26.519005] nouveau0: DRM: GART: 1048576 MiB
[    26.569963] nouveau0: DRM: TMDS table version 2.0
[    26.626121] nouveau0: DRM: DCB version 4.1
[    26.675000] nouveau0: DRM: DCB outp 00: 04800f96 04400020
[    26.739477] nouveau0: DRM: DCB outp 01: 04000f92 00020020
[    26.803956] nouveau0: DRM: DCB outp 02: 04811f86 04400010
[    26.868434] nouveau0: DRM: DCB outp 03: 04011f82 00020010
[    26.932913] nouveau0: DRM: DCB outp 04: 02822f66 04400010
[    26.997390] nouveau0: DRM: DCB outp 05: 02022f62 00020010
[    27.061868] nouveau0: DRM: DCB outp 06: 02833f76 04400020
[    27.126346] nouveau0: DRM: DCB outp 07: 02033f72 00020020
[    27.190825] nouveau0: DRM: DCB outp 15: 01df4ff8 00000000
[    27.255302] nouveau0: DRM: DCB conn 00: 02000046
[    27.310421] nouveau0: DRM: DCB conn 01: 01000146
[    27.365539] nouveau0: DRM: DCB conn 02: 00010246
[    27.420657] nouveau0: DRM: DCB conn 03: 00020346
[    27.475775] nouveau0: DRM: DCB conn 04: 00000470
[    27.531306] nouveau0: DRM: MM: using COPY for buffer copies
[    27.691305] nouveau0: warn: DRM: failed to create encoder 1/8/0: -19
[    27.765563] nouveau0: warn: DRM: Virtual-1 has no encoders, removing
[    27.841480] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    27.920519] [drm] Driver supports precise vblank timestamp query.
[    28.101305] nouveaufb0 at nouveau0
[    28.147544] [drm] Initialized nouveau 1.3.1 20120801 for nouveau0 on minor 0
[    28.233861] nouveaufb0: framebuffer at 0xc0260000, size 1024x768, depth 32, stride 4096
[    28.281306] wsdisplay0 at nouveaufb0 kbdmux 1
[    28.332294] wsmux1: connecting to wsdisplay0
[    28.332294] wskbd0: connecting to wsdisplay0
[    29.531310] entropy: ready
[    33.781306] mfii0: normal state on 'mfii0:0' (online)
[    38.511298] wsdisplay0: screen 1 added (default, vt100 emulation)
[    38.521297] wsdisplay0: screen 2 added (default, vt100 emulation)
[    38.521297] wsdisplay0: screen 3 added (default, vt100 emulation)
[    38.521297] wsdisplay0: screen 4 added (default, vt100 emulation)