Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2023-11-26 07:20:37
From: mlelstv
Description: NetBSD-10 on Amiga A3000
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.
[   1.0000000] NetBSD 10.0_RC1 (WSCONS) #0: Sat Nov 25 15:11:27 CET 2023
[   1.0000000]  mlelstv@gossam:/home/netbsd10/obj.amiga/home/netbsd10/src/sys/arch/amiga/compile/WSCONS
[   1.0000000] total memory = 97792 KB
[   1.0000000] avail memory = 90488 KB
[   1.0000000] Amiga 3000 (m68040 CPU/MMU/FPU)
[   1.0000000] memory segment 0 at 08000000 size 05f80000
[   1.0000000] memory segment 1 at 00000000 size 00200000
[   1.0000000] timecounter: Timecounters tick every 10.000 msec
[   1.0000000] Kernelized RAIDframe activated
[   1.0000000] mainbus0 (root)
[   1.0000000] clock0 at mainbus0: CIA B system hz 100 hardware hz 709379
[   1.0000000] timecounter: Timecounter "CIA B" frequency 709379 Hz quality 100
[   1.0000030] Calibrating delay loop... 124/1024 us
[   1.0000030] a34kbbc0 at mainbus0
[   1.0000030] ser0 at mainbus0: input fifo 512 output fifo 32
[   1.0000030] par0 at mainbus0
[   1.0000030] kbd0 at mainbus0: CIA A type Amiga
[   1.0000030] wskbd0 at kbd0 mux 1
[   1.0000030] ms0 at mainbus0
[   1.0000030] wsmouse0 at ms0 mux 0
[   1.0000030] wsmouse1 at ms0 mux 0
[   1.0000030] amidisplaycc0 at mainbus0: Amiga custom chip graphics 
[   1.0000030] wsdisplay1 at amidisplaycc0 kbdmux 1
[   1.0000030] wsmux1: connecting to wsdisplay1
[   1.0000030] wskbd0: connecting to wsdisplay1
[   1.0000030] fdc0 at mainbus0: dmabuf pa 0x1f5798: dmabuf ka 0x783798
[   1.0000030] fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
[   1.0000030] ahsc0 at mainbus0
[   1.0000030] scsibus0 at ahsc0: 8 targets, 8 luns per target
[   1.0000030] aucc0 at mainbus0
[   1.0000030] audio0 at aucc0: playback
[   1.0000030] audio0: slinear_be:16 2ch 28867Hz, blk 4620 bytes (40ms) for playback
[   1.0000030] spkr0 at audio0: PC Speaker (synthesized)
[   1.0000030] wsbell at spkr0 not configured
[   1.0000030] zbus0 at mainbus0: i/o size 0x03410000
[   1.0000030] toccata0 at zbus0 pa 0xe90000 man/pro 18260/12: ad1848
[   1.0000030] audio1 at toccata0: playback, capture, half duplex
[   1.0000030] audio1: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 512 bytes (2.6ms) for playback
[   1.0000030] audio1: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk 512 bytes (2.6ms) for recording
[   1.0000030] spkr1 at audio1: PC Speaker (synthesized)
[   1.0000030] wsbell at spkr1 not configured
[   1.0000030] le0 at zbus0 pa 0xea0000 man/pro 514/112: address xx:xx:xx:xx:xx:xx
[   1.0000030] le0: 16 receive buffers, 4 transmit buffers
[   1.0000030] xsh0 at zbus0 pa 0x40000000 man/pro 4626/100: Individual Computers X-Surf 100
[   1.0000030] ne0 at xsh0
[   1.0000030] ne0: Ethernet address xx:xx:xx:xx:xx:xx
[   1.0000030] ukphy0 at ne0 phy 16: OUI 0x007063, model 0x0004, rev. 1
[   1.0000030] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[   1.0000030] grfcl0 at zbus0 pa 0x44000000 man/pro 2167/24
[   1.0000030] grf3 at grfcl0: width 640 height 480 colors 16
[   1.0000030] wsdisplay2 at grf3 kbdmux 1
[   1.0000030] wsmux1: connecting to wsdisplay2
[   1.0000030] grfcl: 4MB Picasso IV being used
[   1.0000030] p5bus0 at zbus0 pa 0xf0102c man/pro 8512/100: Phase5 PowerUP on-board bus
[   1.0000030] p5bus0: CyberStorm PPC 604e (sn DBA0012)
[   1.0000030] cbiiisc0 at p5bus0: CyberStorm PPC/Mk-III SCSI host adapter
[   1.0000030] cbiiisc0:  no SCSI termination, host adapter deactivated.
[   1.0000030] scsibus1 at cbiiisc0: 0 targets, 8 luns per target
[   1.0000030] p5pb0 at p5bus0: no PCI bridges detected
[   1.0000030] WARNING: system needs entropy for security; see entropy(7)
[   1.0140871] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[   1.0246231] scsibus0: waiting 2 seconds for devices to settle...
[   1.0419749] scsibus1: waiting 2 seconds for devices to settle...
[   3.0346460] ahsc0: target 0 now synchronous, period=208ns, offset=12.
[   3.0546649] sd0 at scsibus0 target 0 lun 0: <IBM, DORS-32160, WA6A> disk fixed
[   3.1546862] sd0: 2063 MB, 6703 cyl, 5 head, 126 sec, 512 bytes/sect x 4226725 sectors
[   3.1846842] ahsc0: target 1 now synchronous, period=208ns, offset=12.
[   3.2146908] sd1 at scsibus0 target 1 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.2446903] sd1: 2000 MB, 254 cyl, 255 head, 63 sec, 512 bytes/sect x 4096000 sectors
[   3.2746897] ahsc0: target 2 now synchronous, period=208ns, offset=12.
[   3.2946805] sd2 at scsibus0 target 2 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.3246532] sd2: 70000 KB, 8 cyl, 255 head, 68 sec, 512 bytes/sect x 140000 sectors
[   5.4247520] 4 views configured
[   5.4447286] swwdog0: software watchdog initialized
[   5.9047211] root on sd1a dumps on sd1b
[   5.9948760] root file system type: ffs
[   6.0148738] kern.module.path=/stand/amiga/10.0/modules
[   6.0291496] WARNING: preposterous TOD clock time
[   6.0376514] WARNING: using filesystem time
[   6.0470723] WARNING: CHECK AND RESET THE DATE!
[   7.5148392] entropy: best effort