Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2023-12-06 11:56:09
From: njh
Description: FreeBSD/amd64 on LENOVO 81M0
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-RELEASE #0 releng/14.0-n265380-f9716eee8ab4: Fri Nov 10 05:57:23 UTC 2023
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(efifb): resolution 1600x900
CPU: Intel(R) Core(TM) i3-8145U CPU @ 2.10GHz (2300.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806eb  Family=0x6  Model=0x8e  Stepping=11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xc09<RDCL_NO,SKIP_L1DFL_VME>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8114061312 (7738 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO CB-01   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x8a42f000-0x8a42f01e
smbios0: Version: 3.0, BCD Revision: 3.0
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <LENOVO CB-01>
acpi_ec_ecdt_probe: can't get handle
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc1: <AT realtime clock> on acpi0
atrtc1: Warning: Couldn't map I/O.
atrtc1: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x50> port 0x62,0x66,0x270-0x27f on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1200000-0xa120ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xa1218000-0xa121bfff irq 16 at device 20.3 on pci0
iwm0: could not read firmware iwm9000fw (error 0)
device_attach: iwm0 attach returned 6
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x4080-0x4087,0x4088-0x408b,0x4060-0x407f mem 0xa1222000-0xa1223fff,0xa122d000-0xa122d0ff,0xa122c000-0xa122c7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 29.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff irq 17 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x50800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pci0: <simple comms> at device 30.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Cannon Lake HDA Controller> mem 0xa121c000-0xa121ffff,0xa1000000-0xa10fffff irq 16 at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff pnpid ORM0000 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: Can't map interrupt.
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate_intel0: <Intel Speed Shift> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
Timecounter "TSC-low" frequency 1152001091 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Realtek ALC257 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC257 Audio Function Group> at nid 1 on hdacc0
ugen0.1: <Intel XHCI root HUB> at usbus0
pcm0: <Realtek ALC257 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0
pcm1: <Realtek ALC257 (Right Analog Mic)> at nid 25 on hdaa0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xa1218000-0xa121bfff irq 16 at device 20.3 on pci0
iwm9000fw: could not load firmware image, error 6
iwm0: could not read firmware iwm9000fw (error 0)
device_attach: iwm0 attach returned 6
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD10SPZX-24Z10 04.01A04> ACS-3 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <PLDS DVD-RW DA8AESH XL6M> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub0: 18 ports with 18 removable, self powered
ugen0.2: <Azurewave Integrated Camera> at usbus0
Root mount waiting for: usbus0
ugen0.3: <vendor 0x8087 product 0x0aaa> at usbus0
Intel(R) Wireless WiFi based driver for FreeBSD
pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xa1225000-0xa1225fff irq 16 at device 18.0 on pci0
iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xa1218000-0xa121bfff irq 16 at device 20.3 on pci0
iwm0: hw rev 0x310, fw ver 34.3125811985.0, address [_MAC_XXXXXXXXXX]
ig4iic0: <Intel Cannon Lake-LP I2C Controller-2> at device 21.0 on pci0
ig4iic0: Using MSI
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iicbus0: <unknown card> at addr 0x15
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMI4.WQBD: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
acpi_wmi3: <ACPI-WMI mapping> on acpi0
acpi_wmi3: Embedded MOF found
ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: link state changed to UP
lo0: link state changed to UP
re0: link state changed to DOWN
wlan0: ieee80211_new_state_locked: pending INIT -> SCAN transition lost
iichid0: <ELAN0625:00 04F3:0400 I2C HID device> at addr 0x15 irq 110 on iicbus0
hidbus0: <HID bus> on iichid0
ietp0: <Elan Touchpad> on hidbus0
ietp0: [3209:2097], clickpad
re0: link state changed to UP