Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2023-12-30 23:45:36
From: jklos
Description: AlphaServer DS25
[     1.000000] consinit: not using prom console                                                 
[     1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,                    
[     1.000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,                  
[     1.000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
[     1.000000]     The NetBSD Foundation, Inc.  All rights reserved.
[     1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[     1.000000]     The Regents of the University of California.  All rights reserved.

[     1.000000] NetBSD 10.0_RC1 (GENERIC-$Revision: 1.416 $) #0: Sat Dec 30 23:03:22 UTC 2023
[     1.000000] 	[_EMAIL_XXXXXXXX]:/usr/obj-alpha/sys/arch/alpha/compile/GENERIC
[     1.000000] AlphaServer DS25, 1000MHz, s/n 4239KW51A0
[     1.000000] 8192 byte page size, 2 processors.
[     1.000000] total memory = 12288 MB
[     1.000000] (7352 KB reserved for PROM, 12280 MB used by NetBSD)
[     1.000000] avail memory = 12098 MB
[     1.000000] timecounter: Timecounters tick every 0.976 msec
[     1.000000] Kernelized RAIDframe activated
[     1.000000] mainbus0 (root)
[     1.000000] cpu0 at mainbus0: ID 0 (primary), 21264C-6 (EV68CB)
[     1.000000] cpu0: Architecture extensions: 0x1307<PMI,PAT,MVI,CIX,FIX,BWX>
[     1.000000] cpu1 at mainbus0: ID 1, 21264C-6 (EV68CB)
[     1.000000] cpu1: Architecture extensions: 0x1307<PMI,PAT,MVI,CIX,FIX,BWX>
[     1.000000] tsc0 at mainbus0: 21274 Core Logic Chipset, Cchip rev 0
[     1.000000] tsc0: 8 Dchips, 2 memory buses of 32 bytes
[     1.000000] tsc0: arrays present: 4096MB (split), 2048MB, 4096MB (split), 2048MB, Dchip 0 rev 1
[     1.000000] tsp0 at tsc0
[     1.000000] pci0 at tsp0 bus 0
[     1.000000] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] sio0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge (rev. 0xc3)
[     1.000000] fxp0 at pci0 dev 8 function 0: Intel i82559ER Ethernet (rev. 0x09)
[     1.000000] fxp0: interrupting at dec 6600 irq 20
[     1.000000] fxp0: May need receiver lock-up workaround
[     1.000000] fxp0: Ethernet address [_MAC_XXXXXXXXXX]
[     1.000000] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
[     1.000000] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[     1.000000] Compaq product a0f7 (PCI Hot-Plug system, revision 0x12) at pci0 dev 12 function 0 not configured
[     1.000000] aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1)
[     1.000000] aceride0: bus-master DMA support present
[     1.000000] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
[     1.000000] aceride0: primary channel configured to compatibility mode
[     1.000000] aceride0: primary channel interrupting at isa irq 14
[     1.000000] atabus0 at aceride0 channel 0
[     1.000000] aceride0: secondary channel configured to compatibility mode
[     1.000000] aceride0: secondary channel interrupting at isa irq 15
[     1.000000] atabus1 at aceride0 channel 1
[     1.000000] isa0 at sio0
[     1.000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
[     1.000000] com0: console
[     1.000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
[     1.000000] pckbc0 at isa0 port 0x60-0x64
[     1.000000] attimer0 at isa0 port 0x40-0x43
[     1.000000] pcppi0 at isa0 port 0x61
[     1.000000] spkr0 at pcppi0: PC Speaker
[     1.000000] wsbell at spkr0 not configured
[     1.000000] midi0 at pcppi0: PC speaker
[     1.000000] isabeep0 at pcppi0
[     1.000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
[     1.000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
[     1.000000] attimer0: attached to pcppi0
[     1.000000] tsp1 at tsc0
[     1.000000] pci1 at tsp1 bus 0
[     1.000000] pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] ahc0 at pci1 dev 1 function 0: Adaptec aic7899 Ultra160 SCSI adapter
[     1.000000] ahc0: interrupting at dec 6600 irq 0
[     1.000000] ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
[     1.000000] scsibus0 at ahc0: 16 targets, 8 luns per target
[     1.000000] ahc1 at pci1 dev 1 function 1: Adaptec aic7899 Ultra160 SCSI adapter
[     1.000000] ahc1: interrupting at dec 6600 irq 1
[     1.000000] ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
[     1.000000] scsibus1 at ahc1: 16 targets, 8 luns per target
[     1.000000] bge0 at pci1 dev 5 function 0: Broadcom BCM5703X Gigabit Ethernet
[     1.000000] bge0: interrupting at dec 6600 irq 4
[     1.000000] bge0: HW config 00000014, 00000000, 00000000, 00000000 00000000
[     1.000000] bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address [_MAC_XXXXXXXXXX]
[     1.000000] brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
[     1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] tsp2 at tsc0
[     1.000000] pci2 at tsp2 bus 0
[     1.000000] pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] bge1 at pci2 dev 2 function 0: Broadcom BCM5703 Gigabit Ethernet
[     1.000000] bge1: interrupting at dec 6600 irq 32
[     1.000000] bge1: HW config 00010055, 00000015, 00000000, 00000000 00000000
[     1.000000] bge1: ASIC BCM5702/5703 B0 (0x1100), Ethernet address [_MAC_XXXXXXXXXX]
[     1.000000] brgphy1 at bge1 phy 1: BCM5703 1000BASE-T media interface, rev. 3
[     1.000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[     1.000000] tsp3 at tsc0
[     1.000000] pci3 at tsp3 bus 0
[     1.000000] pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[     1.000000] mpt0 at pci3 dev 1 function 0: Symbios Logic SAS1068 (rev. 0x01)
[     1.000000] mpt0: interrupting at dec 6600 irq 36
[     1.000000] scsibus2 at mpt0: 112 targets, 8 luns per target
[     1.000000] Compaq product a0f7 (PCI Hot-Plug system, revision 0x12) at pci3 dev 6 function 0 not configured
[     1.000000] tsciic0 at tsc0
[     1.000000] iic0 at tsciic0: I2C bus
[     1.000000] timecounter: Timecounter "PCC" frequency 999938400 Hz quality 1000
[     1.000003] timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
[     3.627725] scsibus0: waiting 2 seconds for devices to settle...
[     3.698166] scsibus1: waiting 2 seconds for devices to settle...
[     3.769931] scsibus2: waiting 2 seconds for devices to settle...
[     3.842571] WARNING: system needs entropy for security; see entropy(7)
[     4.358195] entropy: best effort
[     5.959758] sd0 at scsibus0 target 0 lun 0: <COMPAQ, BD0726536C, 3B02> disk fixed
[     6.051554] sd0: 69464 MB, 28004 cyl, 20 head, 254 sec, 512 bytes/sect x 142264000 sectors
[     6.154094] sd0: sync (25.00ns offset 63), 16-bit (80.000MB/s) transfers, tagged queueing
[    21.128715] sd1 at scsibus2 target 1 lun 0: <ATA, ST2000LM010-1RA1, SDM1> disk fixed
[    21.224415] sd1: 1863 GB, 1907730 cyl, 16 head, 127 sec, 512 bytes/sect x 3907029168 sectors
[    21.325001] sd1: tagged queueing
[    21.375782] sd2 at scsibus2 target 2 lun 0: <ATA, ST2000LM010-1RA1, SDM1> disk fixed
[    21.471485] sd2: 1863 GB, 1907730 cyl, 16 head, 127 sec, 512 bytes/sect x 3907029168 sectors
[    21.572071] sd2: tagged queueing
[    21.613088] sd3 at scsibus2 target 3 lun 0: <ATA, Samsung SSD 850, 2B6Q> disk fixed
[    21.704885] sd3: 465 GB, 476941 cyl, 16 head, 127 sec, 512 bytes/sect x 976773168 sectors
[    21.802541] sd3: tagged queueing
[    21.842579] sd4 at scsibus2 target 4 lun 0: <ATA, Samsung SSD 850, 2B6Q> disk fixed
[    21.934376] sd4: 465 GB, 476941 cyl, 16 head, 127 sec, 512 bytes/sect x 976773168 sectors
[    22.032033] sd4: tagged queueing
[    22.086722] swwdog0: software watchdog initialized
[    22.493948] sd1: no disk label
[    22.529329] sd1: no disk label
[    22.902150] sd2: no disk label
[    22.937308] sd2: no disk label
[    23.012502] raid1: RAID Level 1
[    23.048431] raid1: Components: /dev/sd1c /dev/sd2c
[    23.105634] raid1: Total Sectors: 3907028992 (1907729 MB)
[    23.307424] raid0: RAID Level 1
[    23.343085] raid0: Components: /dev/sd3a /dev/sd4a
[    23.400288] raid0: Total Sectors: 951605120 (464650 MB)
[    23.825980] root on raid0a dumps on raid0b
[    23.884577] root file system type: ffs
[    23.927719] kern.module.path=/stand/alpha/10.0/modules
[    25.521296] entropy: ready
[    59.699048] Accounting started