Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-01-04 17:34:16
From: uwe
Description: A20-OLinuXino-MICRO-e4GB
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.99.10 (GENERIC) #0: Mon Jan 1 09:28:15 MSK 2024
uwe@majava:/home/uwe/work/netbsd/build/obj/evbearmv7hf-el/sys/arch/evbarm/compile/GENERIC
total memory = 1015 MB
avail memory = 978 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
armfdt0 (root)
simplebus0 at armfdt0: Olimex A20-OLinuXino-MICRO-eMMC
simplebus1 at simplebus0
cpus0 at simplebus0
simplebus2 at simplebus0
simplebus3 at simplebus0
cpu0 at cpus0: Cortex-A7 r0p4 (Cortex V7A core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: L1 32KB/32B 2-way (512 set) VIPT Instruction cache
cpu0: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache
cpu0: L2 256KB/64B 8-way (512 set) write-through PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpufreqdt0 at cpu0
cpu1 at cpus0: Cortex-A7 r0p4 (Cortex V7A core)
cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu1: L1 32KB/32B 2-way (512 set) VIPT Instruction cache
cpu1: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache
cpu1: L2 256KB/64B 8-way (512 set) write-through PIPT Unified cache
vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpufreqdt1 at cpu1
gic0 at simplebus1: GIC
armgic0 at gic0: Generic Interrupt Controller, 160 sources (150 valid)
armgic0: 16 Priorities, 128 SPIs, 7 PPIs, 15 SGIs
fclock0 at simplebus2: 25000000 Hz fixed clock (mii_phy_tx)
fclock1 at simplebus2: 125000000 Hz fixed clock (gmac_int_tx)
fclock2 at simplebus2: 24000000 Hz fixed clock (osc24M)
fclock3 at simplebus2: 32768 Hz fixed clock (osc32k)
gtmr0 at simplebus0: Generic Timer
gtmr0: interrupting on GIC irq 27
armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500
sun4ia10ccu0 at simplebus1: A20 CCU
sunxinmi0 at simplebus1: NMI, NMI IRQ 0
sunxigmacclk0 at simplebus2: GMAC MII/RGMII clock mux
sunxigpio0 at simplebus1: PIO
gpio0 at sunxigpio0: 175 pins
sunxigpio0: interrupting on GIC irq 60
sun4idma0 at simplebus1: DMA controller
sun4idma0: interrupting on GIC irq 59
sunxisramc0 at simplebus1: SRAM Controller
sunxisramc0: area: SRAM A3/A4
sunxisramc0: area: SRAM D
sunxidebe0 at simplebus1: Display Engine Backend (display-backend@1e60000)
sunxidebe1 at simplebus1: Display Engine Backend (display-backend@1e40000)
sunxihdmi0 at simplebus1: HDMI 1.3
sunxitcon0 at simplebus1: LCD/TV timing controller (lcd-controller@1c0c000)
sunxitcon0: tcon unit 0
sunxidebe0: debe unit 0
sunxidebe1: debe unit 1
sunxitcon1 at simplebus1: LCD/TV timing controller (lcd-controller@1c0d000)
sunxitcon1: tcon unit 1
connector0 at simplebus0: HDMI connector
sunxisid0 at simplebus1: Security ID EFUSE
com0 at simplebus1: DesignWare APB UART, 64-byte FIFO
com0: console
com0: interrupting on GIC irq 33
com1 at simplebus1: DesignWare APB UART, 64-byte FIFO
com1: interrupting on GIC irq 51
com2 at simplebus1: DesignWare APB UART, 64-byte FIFO
com2: interrupting on GIC irq 52
fregulator0 at simplebus0: vcc3v3
fregulator1 at simplebus0: usb0-vbus
fregulator2 at simplebus0: usb1-vbus
fregulator3 at simplebus0: usb2-vbus
fregulator4 at simplebus0: ahci-5v
fregulator5 at simplebus0: vcc3v0
sunxidep0 at simplebus0: autoconfiguration error: can't activate pipeline 0
sunxidep0: autoconfiguration error: can't activate pipeline 1
fregulator6 at simplebus0: vcc5v0
sunxiusbphy0 at simplebus1: USB PHY
sunxitwi0 at simplebus1: Marvell TWSI controller
sunxitwi0: interrupting on GIC irq 39
iic0 at sunxitwi0: I2C bus
axp20x0 at iic0 addr 0x34: AC used, battery present
axp20x0: DCDC2 1400mV
axp20x0: DCDC3 1250mV
axp20x0: LDO2 3000mV, LDO4 2800mV
axp20x0: LDO3 2800mV
axp20xreg0 at axp20x0: dcdc2 (vdd-cpu)
axp20xreg1 at axp20x0: dcdc3 (vdd-int-dll)
sunxits0 at simplebus1: Touch Screen Controller
sunxits0: interrupting on GIC irq 61
/soc/display-frontend@1e00000 at simplebus1 not configured
/soc/display-frontend@1e20000 at simplebus1 not configured
mmcpwrseq0 at simplebus0: eMMC hardware reset provider
awge0 at simplebus1: GMAC
awge0: interrupting on GIC irq 117
awge0: Core version: 00000000
awge0: Ethernet address [_MAC_XXXXXXXXXX]
smscphy0 at awge0 phy 1: SMSC LAN8710/LAN8720 10/100 Ethernet Transceiver, rev. 1
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sun4ispi0 at simplebus1: SPI
sun4ispi0: interrupting on GIC irq 43
spi0 at sun4ispi0: SPI bus
sunximmc0 at simplebus1: SD/MMC controller
sunximmc0: interrupting on GIC irq 64
sunximmc1 at simplebus1: SD/MMC controller
sunximmc1: interrupting on GIC irq 66
sunximmc2 at simplebus1: SD/MMC controller
sunximmc2: interrupting on GIC irq 67
motg0 at simplebus1: 'otg' mode not supported
ehci0 at simplebus1: EHCI
ehci0: interrupting on GIC irq 71
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 1 port
usb0 at ehci0: USB revision 2.0
ohci0 at simplebus1: OHCI
ohci0: interrupting on GIC irq 96
ohci0: OHCI version 1.0
usb1 at ohci0: USB revision 1.0
/soc/crypto-engine@1c15000 at simplebus1 not configured
sun4ispi1 at simplebus1: SPI
sun4ispi1: interrupting on GIC irq 44
spi1 at sun4ispi1: SPI bus
ahcisata0 at simplebus1: SATA
ahcisata0: interrupting on GIC irq 88
ahcisata0: ignoring broken port multiplier support
ahcisata0: AHCI revision 1.10, 1 port, 32 slots, CAP 0x6f24ff80<CCCS,PSC,SSC,PMD,SAM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSS,SSNTF,SNCQ>
atabus0 at ahcisata0 channel 0
ehci1 at simplebus1: EHCI
ehci1: interrupting on GIC irq 72
ehci1: EHCI version 1.0
ehci1: 1 companion controller, 1 port
usb2 at ehci1: USB revision 2.0
ohci1 at simplebus1: OHCI
ohci1: interrupting on GIC irq 97
ohci1: OHCI version 1.0
usb3 at ohci1: USB revision 1.0
sunxiwdt0 at simplebus1: Watchdog
sunxiwdt0: default watchdog period is 16 seconds
sunxirtc0 at simplebus1: RTC
sunxilradc0 at simplebus1: LRADC, channel 0 enabled
sunxilradc0: : channel 0 levels 6(Volume Up) 12(Volume Down) 18(Menu) 25(Search) 31(Home) 37(Esc) 44(Enter)
sunxilradc0: interrupting on GIC irq 63
sunxicodec0 at simplebus1: A10 Audio Codec
audio0 at sunxicodec0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
sunxitwi1 at simplebus1: Marvell TWSI controller
sunxitwi1: interrupting on GIC irq 40
iic1 at sunxitwi1: I2C bus
seeprom0 at iic1 addr 0x50: eeprom: size 2048
sunxitwi2 at simplebus1: Marvell TWSI controller
sunxitwi2: interrupting on GIC irq 41
iic2 at sunxitwi2: I2C bus
/soc/gpu@1c40000 at simplebus1 not configured
psci0 at simplebus0: PSCI 0.1
armpmu0 at simplebus0: Performance Monitor Unit
gpioleds0 at simplebus0: a20-olinuxino-micro:green:usr
/soc/video-codec@1c0e000 at simplebus1 not configured
sunxitimer0 at simplebus1: Timer
timecounter: Timecounter "Timer 2" frequency 24000000 Hz quality 200
timecounter: Timecounter "LOSC" frequency 32768 Hz quality 150
sunxihstimer0 at simplebus1: High Speed Timer
timecounter: Timecounter "hstimer" frequency 152000000 Hz quality 300
sunxihstimer0: interrupting on GIC irq 113
genfb0 at simplebus3: Simple Framebuffer (1920x1200 32-bpp @ 0x7f736000)
genfb0: framebuffer at 0x7f736000, size 1920x1200, depth 32, stride 7680
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpufreqdt0: rate: 960.000 MHz, 1400000 uV
cpufreqdt1: rate: 960.000 MHz, 1400000 uV
sdmmc0 at sunximmc0
sdmmc1 at sunximmc1
sdmmc2 at sunximmc2
armpmu0: interrupting on GIC irq 152
armpmu0: interrupting on GIC irq 153
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 1 port with 1 removable, self powered
WARNING: system needs entropy for security; see entropy(7)
IPsec: Initialized Security Association Processing.
ld1 at sdmmc1: <0xfe:0x014e:P1XXXX:0x00:0x318992ed:0x000>
ld1: 3688 MB, 1873 cyl, 64 head, 63 sec, 512 bytes/sect x 7553024 sectors
ld1: 4-bit width, 32 KB cache, 52.000 MHz
sdmmc0: SD card status: 4-bit, C0
ld0 at sdmmc0: <0x03:0x5344:SU02G:0x80:0x818d91b2:0x0b7>
ld0: 1886 MB, 957 cyl, 64 head, 63 sec, 512 bytes/sect x 3862528 sectors
ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
wd0 at atabus0 drive 0
wd0: <GIGABYTE GP-GSTFS31120GNTD>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
swwdog0: software watchdog initialized
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/evbarm/10.99.10/modules
entropy: best effort
entropy: ready