Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-01-19 18:57:34
From: ketas
Description: FreeBSD/amd64 on Hewlett-Packard HP Compaq dc7800 Small Form Factor
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.2-RELEASE-p9 #0 releng/13.2-n254652-c78c31d2ef40-dirty: Wed Dec 20 13:21:16 EET 2023
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c)
CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2327.58-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 4299161600 (4100 MB)
avail memory = 4028530688 (3841 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <COMPAQ BEARLAKE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
Security policy loaded: TrustedBSD MAC/portacl (mac_portacl)
ioapic0: MADT APIC ID 1 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
smbios0: <System Management BIOS> at iomem 0xf9c00-0xf9c1e
smbios0: Version: 2.5, BCD Revision: 2.5
aesni0: No AES or SHA support.
acpi0: <HPQOEM SLIC-BPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311)
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2210-0x2217 mem 0xf0100000-0xf017ffff,0xe0000000-0xefffffff,0xf0000000-0xf00fffff irq 16 at device 2.0 on pci0
agp0: <Intel Q35 SVGA controller> on vgapci0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 14.0.
agp0: aperture size is 256M, detected 6140k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x2218-0x221f,0x2240-0x2243,0x2220-0x2227,0x2244-0x2247,0x2200-0x220f irq 18 at device 3.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) 82566DM-2 ICH9 AMT> port 0x2100-0x211f mem 0xf0180000-0xf019ffff,0xf01a5000-0xf01a5fff irq 19 at device 25.0 on pci0
em0: EEPROM V1.3-1
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801I (ICH9) USB controller> port 0x2120-0x213f irq 20 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x2140-0x215f irq 21 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x2160-0x217f irq 22 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6800-0xf01a6bff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xf01a0000-0xf01a3fff irq 21 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311)
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
Firmware Error (ACPI): \134_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20201113/nsarguments-311)
Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20201113/dsfield-352)
ACPI Error: AE_ALREADY_EXISTS, CreateBufferField failure (20201113/dswload2-639)
ACPI Error: Aborting method \134_SB.PCI0._OSC due to previous error (AE_ALREADY_EXISTS) (20201113/psparse-689)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci2: <ACPI PCI bus> on pcib2
ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0x1110-0x1117,0x1120-0x1123,0x1118-0x111f,0x1124-0x1127,0x1100-0x110f mem 0xf0200000-0xf02001ff irq 17 at device 0.0 on pci2
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci0: quirks=0xc00000<NOCCS,NOAUX>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
uhci3: <Intel 82801I (ICH9) USB controller> port 0x2180-0x219f irq 20 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x21a0-0x21bf irq 21 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6c00-0xf01a6fff irq 20 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci1: <Intel ICH9 AHCI SATA controller> port 0x2230-0x2237,0x2248-0x224b,0x2238-0x223f,0x224c-0x224f,0x21c0-0x21df mem 0xf01a6000-0xf01a67ff irq 18 at device 31.2 on pci0
ahci1: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 4 on ahci1
ahcich7: <AHCI channel> at channel 5 on ahci1
acpi_button0: <Power Button> on acpi0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMID.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
acpi_hp0: HP event GUID detected, installing event handler
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 14.0.
sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 14.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1163749891 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Analog Devices AD1884 HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1884 Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1884 (Rear Analog)> at nid 18 and 21 on hdaa0
pcm1: <Analog Devices AD1884 (Front Analog)> at nid 17 and 20 on hdaa0
ugen6.1: <Intel EHCI root HUB> at usbus6
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub0 on usbus6
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub1 on usbus3
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub2 on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3 on usbus5
uhub4 on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub5 on usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub6 on usbus2
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Trying to mount root from zfs:zroot/ROOT/default []...
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: CAM usbus3 usbus6
uhub0: 4 ports with 4 removable, self powered
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
uhub1: 6 ports with 6 removable, self powered
fdc0: cmd 08 failed at in byte 1 of 1
fdc0: sense intr err reading stat reg 0
ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
ada0: <TOSHIBA HDWE140 FP1R> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 3815447MB (7814037168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
ada1: <ST12000VN0008-2YS101 SC60> ACS-4 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 11444224MB (23437770752 512 byte sectors)
ada2 at ahcich2 bus 0 scbus4 target 0 lun 0
ada2: <ST3160815AS 3.AAD> ATA-7 SATA 2.x device
ada2: [_SERIAL_NUMBER_XXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 152627MB (312581808 512 byte sectors)
ada3 at ahcich3 bus 0 scbus5 target 0 lun 0
ada3: <WDC WD1600AAJS-75M0A0 02.03E02> ATA8-ACS SATA 2.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 152587MB (312500000 512 byte sectors)
ada4 at ahcich6 bus 0 scbus6 target 0 lun 0
ada4: <TOSHIBA HDWR21C 0601> ACS-3 ATA SATA 3.x device
ada4: [_SERIAL_NUMBER_XXXXXXXXX]
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 11444224MB (23437770752 512 byte sectors)
ugen3.2: <Kingston DataTraveler 3.0> at usbus3
umass0 on uhub1
umass0: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.10, addr 2> on usbus3
umass0: SCSI over Bulk-Only; quirks = 0xc000
umass0:8:0: Attached to scbus8
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 59136MB (121110528 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen5.2: <Prolific Technology Inc. USB-Serial Controller> at usbus5
Root mount waiting for: usbus3
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Kingston DataTraveler 2.0 (0x13fe:0x1d00)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Kingston DataTraveler 2.0 (0x13fe:0x1d00)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Kingston DataTraveler 2.0 (0x13fe:0x1d00)
ugen3.3: <Kingston DataTraveler 2.0> at usbus3
umass1 on uhub1
umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.10, addr 3> on usbus3
umass1: SCSI over Bulk-Only; quirks = 0xc100
umass1:9:1: Attached to scbus9
da1 at umass-sim1 bus 1 scbus9 target 0 lun 0
da1: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXX]
da1: 40.000MB/s transfers
da1: 3936MB (8060928 512 byte sectors)
da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
Root mount waiting for: usbus3
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device FreeBSD foundation USB Memory Stick (0x0001:0x0012)
ugen3.4: <FreeBSD foundation USB Memory Stick> at usbus3
umass2 on uhub1
umass2: <USB Mass Storage Interface> on usbus3
umass2: SCSI over Bulk-Only; quirks = 0x0100
umass2:10:2: Attached to scbus10
da2 at umass-sim2 bus 2 scbus10 target 0 lun 0
da2: <FreeBSD File-Stor Gadget 0101> Removable Direct Access SCSI-2 device
da2: 40.000MB/s transfers
da2: 4MB (8192 512 byte sectors)
da2: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus3
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device USB Mass storage (0x0ea0:0x2168)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device USB Mass storage (0x0ea0:0x2168)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device USB Mass storage (0x0ea0:0x2168)
ugen3.5: <USB Mass storage> at usbus3
umass3 on uhub1
umass3: <USB Mass storage, class 0/0, rev 2.00/2.00, addr 5> on usbus3
umass3: SCSI over Bulk-Only; quirks = 0xc100
umass3:11:3: Attached to scbus11
da3 at umass-sim3 bus 3 scbus11 target 0 lun 0
da3: <128MB USB2.0FlashDrive 2.00> Removable Direct Access SCSI-2 device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da3: 40.000MB/s transfers
da3: 125MB (256000 512 byte sectors)
da3: quirks=0x2<NO_6_BYTE>
warning: total configured swap (4194304 pages) exceeds maximum recommended amount (3950264 pages).
warning: increase kern.maxswzone or reduce amount of swap.
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge1: Ethernet address: [_MAC_XXXXXXXXXX]
tap4: Ethernet address: [_MAC_XXXXXXXXXX]
tap5: Ethernet address: [_MAC_XXXXXXXXXX]
tap6: Ethernet address: [_MAC_XXXXXXXXXX]
tap10: Ethernet address: [_MAC_XXXXXXXXXX]
tap11: Ethernet address: [_MAC_XXXXXXXXXX]
tap12: Ethernet address: [_MAC_XXXXXXXXXX]
epair0a: Ethernet address: [_MAC_XXXXXXXXXX]
epair0b: Ethernet address: [_MAC_XXXXXXXXXX]
epair0a: link state changed to UP
epair0b: link state changed to UP
epair10000a: Ethernet address: [_MAC_XXXXXXXXXX]
epair10000b: Ethernet address: [_MAC_XXXXXXXXXX]
epair10000a: link state changed to UP
epair10000b: link state changed to UP
epair10001a: Ethernet address: [_MAC_XXXXXXXXXX]
epair10001b: Ethernet address: [_MAC_XXXXXXXXXX]
epair10001a: link state changed to UP
epair10001b: link state changed to UP
epair10002a: Ethernet address: [_MAC_XXXXXXXXXX]
epair10002b: Ethernet address: [_MAC_XXXXXXXXXX]
epair10002a: link state changed to UP
epair10002b: link state changed to UP
epair10003a: Ethernet address: [_MAC_XXXXXXXXXX]
epair10003b: Ethernet address: [_MAC_XXXXXXXXXX]
epair10003a: link state changed to UP
epair10003b: link state changed to UP
epair10004a: Ethernet address: [_MAC_XXXXXXXXXX]
epair10004b: Ethernet address: [_MAC_XXXXXXXXXX]
epair10004a: link state changed to UP
epair10004b: link state changed to UP
lo0: link state changed to UP
lagg0: link state changed to DOWN
em0: link state changed to UP
pflog0: promiscuous mode enabled
uplcom0 on uhub3
uplcom0: <Prolific Technology Inc. USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 2> on usbus5
em0: link state changed to DOWN
em0: promiscuous mode enabled
bridge0: link state changed to UP
tap10: promiscuous mode enabled
bridge0: link state changed to DOWN
tap11: promiscuous mode enabled
tap12: promiscuous mode enabled
tap4: promiscuous mode enabled
tap5: promiscuous mode enabled
tap6: promiscuous mode enabled
lagg0: promiscuous mode enabled
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair10000a: promiscuous mode enabled
epair10001a: promiscuous mode enabled
epair10002a: promiscuous mode enabled
epair10003a: promiscuous mode enabled
epair10004a: promiscuous mode enabled