Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-01-25 11:58:34
From: jmcneill
Description: NetBSD/evbppc 10.99.10 on Nintendo Wii
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.99.10 (WII) #129: Thu Jan 25 07:48:26 AST 2024
jmcneill@metroid:/nethome/jmcneill/netbsd/cvs-src/sys/arch/evbppc/compile/obj/WII
total memory = 90112 KB
avail memory = 65660 KB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root): Nintendo Wii
cpu0 at mainbus0: 750 (Revision 1.2), ID 0 (primary)
cpu0: HID0 0x8051c2e4<EMCP,NAP,DPM,NHR,ICE,DCE,SPD,SGE,DCFA,BTIC,BHT>, powersave: 1
cpu0: 750.00 MHz, 256KB WB L2 cache
genfb0 at mainbus0 addr 0x0c002000: NTSC 480p
genfb0: framebuffer at 0x1698000, size 640x480, depth 16, stride 1280
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
exi0 at mainbus0 addr 0x0d006800 irq 4: External Interface
rtcsram0 at exi0 addr 0-1: RTC/SRAM
hollywood0 at mainbus0 irq 14: Hollywood ES2.1
ehci0 at hollywood0 addr 0xd040000 irq 4: EHCI
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 2 ports each
usb0 at ehci0: USB revision 2.0
sdhc0 at hollywood0 addr 0xd070000 irq 7: SDHC
sdhc0: SDHC 1.0, rev 0, caps <01e130b0/00000000>, SDMA, 48000 kHz, HS 3.3V, 1024 byte blocks
sdmmc0 at sdhc0 slot 0
sdhc1 at hollywood0 addr 0xd080000 irq 8: SDHC
sdhc1: SDHC 1.0, rev 0, caps <01e130b0/00000000>, SDMA, 48000 kHz, HS 3.3V, 1024 byte blocks
sdmmc1 at sdhc1 slot 0
resetbtn0 at hollywood0 irq 17: Reset button
hwgpio0 at hollywood0 addr 0xd0000c0 irq 10: GPIO
gpio0 at hwgpio0: 24 pins
gpioiic0 at gpio0 pins 14 15: SDA[15], SCL[14]
iic0 at gpioiic0: I2C bus
avenc0 at iic0 addr 0x70: A/V Encoder
bwai0 at mainbus0 addr 0x0d006c00 irq 5: Audio Interface
bwdsp0 at mainbus0 addr 0x0c005000 irq 6: DSP
audio0 at bwdsp0: playback
audio0: slinear_be:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
vmmask 38000000 schedmask 7a000000 highmask 7e000000
timecounter: Timecounter "mftb" frequency 60750000 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
WARNING: system needs entropy for security; see entropy(7)
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
sdhc1: data crc error
sdmmc0: SD card status: 4-bit, C4
ld0 at sdmmc0: <0x03:0x5344:SS08G:0x80:0x1a2a3683:0x141>
ld0: 7580 MB, 3850 cyl, 64 head, 63 sec, 512 bytes/sect x 15523840 sectors
ld0: 4-bit width, High-Speed/SDR25, 48.000 MHz
uhub1 at uhub0 port 1: Generic (0x0bda) 4-Port USB 2.0 Hub (0x5411), class 9/0, rev 2.10/1.47, addr 2
uhub1: multiple transaction translators
uhub1: 4 ports with 4 removable, self powered
axe0 at uhub1 port 1
axe0: ASIX Electronics (0x0b95) AX88772 USB 2.0 10/100 ethernet controller (0x7720), rev 2.00/0.01, addr 3
ukphy0 at axe0 phy 16: Asix Semiconductor AX88772 internal PHY (OUI 0x007063, model 0x0001), rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: Ethernet address [_MAC_XXXXXXXXXX]
uhidev0 at uhub1 port 3 configuration 1 interface 0
uhidev0: Logitech (0x046d) Gaming Keyboard G610 (0xc338), rev 2.00/4.11, addr 4, iclass 3/1
ukbd0 at uhidev0: 8 Variable keys, 6 Array codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1
uhidev1: Logitech (0x046d) Gaming Keyboard G610 (0xc338), rev 2.00/4.11, addr 4, iclass 3/0
uhidev1: 18 report ids
uhid0 at uhidev1 reportid 1: input=20, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
uhid3 at uhidev1 reportid 18: input=63, output=63, feature=0
ure0 at uhub1 port 4
ure0: CMI (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00, addr 5
ure0: RTL8153 ver 5c30
ukphy1 at ure0 phy 0: RealTek RTL8251 1000BASE-T media interface (OUI 0x00e04c, model 0x0000), rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
ure0: Ethernet address [_MAC_XXXXXXXXXX]
ehci0: handing over full speed device on port 3 to companion controller
sdmmc1: autoconfiguration error: couldn't enable card: 60
WARNING: 1 error while detecting hardware; check system log.
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/evbppc/10.99.10/modules
entropy: best effort
wsdisplay0: screen 4 added (default, vt100 emulation)