Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-02-11 02:02:49
From: yamori813
Description: BCM5301X
[ 1.0000000] uboot arg = 0, 0, 0, 0x43464531 [ 1.0000000] NetBSD/evbarm (bcm53xx) booting ... [ 1.0000000] initarm: Configuring system, CLIDR=1110000003 CTR=0x83338003 PMUSERSR=0 [ 1.0000000] [ Kernel symbol table missing! ] [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0_RC3 (BCM5301X) #76: Sun Feb 11 11:01:19 JST 2024 [ 1.0000000] hiroki@netbsd:/usr/home/hiroki/netbsd-10/sys/arch/evbarm/compile/obj/BCM5301X [ 1.0000000] total memory = 128 MB [ 1.0000000] avail memory = 113 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0 core 0: 800 MHz Cortex-A9 r3p0 (Cortex V7A core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache [ 1.0000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] cpu0: L2 256KB/32B 16-way (512 set) write-back-locking-D PIPT Unified cache [ 1.0000000] cpu0: unrecognized VFP version 0 [ 1.0000000] armperiph0 at mainbus0 [ 1.0000000] arml2cc0 at armperiph0: ARM PL310 r3p2 L2 Cache Controller [ 1.0000000] armgic0 at armperiph0: Generic Interrupt Controller, 256 sources (245 valid) [ 1.0000000] armgic0: 32 Priorities, 224 SPIs, 5 PPIs, 16 SGIs [ 1.0000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (400 MHz) [ 1.0000000] arma9tmr0: interrupting on irq 27 [ 1.0000000] bcmcca0 at mainbus0: BCM53010 (Rev A0) [ 1.0000000] bcmcca0: interrupting at irq 117 [ 1.0000000] com0 at bcmcca0 channel 0: ns16550a, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] channel 1bcmccb0 at mainbus0 [ 1.0000000] bcmmdio0 at bcmccb0: MDIO bus @ 2 MHz [ 1.0000000] bcmrng0 at bcmccb0: Random Number Generator (512 bit FIFO) [ 1.0000000] bcmi2c0 at bcmccb0 [ 1.0000000] bcmeth0 at bcmccb0 port 0: Gigabit Ethernet Controller [ 1.0000000] bcmeth0: failed to establish interrupt 179 [ 1.0000000] bcmeth1 at bcmccb0 port 1: Gigabit Ethernet Controller [ 1.0000000] bcmeth1: failed to establish interrupt 180 [ 1.0000000] bcmeth2 at bcmccb0 port 2: Gigabit Ethernet Controller [ 1.0000000] bcmeth2: failed to establish interrupt 181 [ 1.0000000] bcmpax0 at bcmccb0 port 0: PCI Express V2 1-lane RC Controller [ 1.0000000] bcmpax0: interrupting on irqs 159-164 [ 1.0000000] bcmpax0: iwin[1]=0/0 iwin[2]=0/0 [ 1.0000000] pci0 at bcmpax0 bus 0 [ 1.0000000] ppb0 at pci0 dev 0 function 0: Broadcom product 8011 (rev. 0x00) [ 1.0000000] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0000000] pci1 at ppb0 bus 1 [ 1.0000000] Broadcom product 4331 (miscellaneous network, revision 0x02) at pci1 dev 0 function 0 not configured [ 1.0000000] bcmpax1 at bcmccb0 port 1: PCI Express V2 1-lane RC Controller [ 1.0000000] bcmpax1: interrupting on irqs 165-170 [ 1.0000000] bcmpax1: iwin[1]=0/0 iwin[2]=0/0 [ 1.0000000] pci2 at bcmpax1 bus 0 [ 1.0000000] ppb1 at pci2 dev 0 function 0: Broadcom product 8011 (rev. 0x00) [ 1.0000000] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0000000] pci3 at ppb1 bus 1 [ 1.0000000] Broadcom product 4360 (miscellaneous network, revision 0x03) at pci3 dev 0 function 0 not configured [ 1.0000000] sdhc0 at bcmccb0: SDHC controller [ 1.0000000] sdhc0: SDHC 3.0, rev 169, PIO, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1 (1s timer), 2048 byte blocks [ 1.0000000] sdmmc0 at sdhc0 slot 0 [ 1.0000000] sdhc0: interrupting on irq 177 [ 1.0000000] bcmusb0 at bcmccb0 [ 1.0000000] ohci0 at bcmusb0: OHCI USB controller [ 1.0000000] ohci0: OHCI version 1.0, legacy support [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] ehci0 at bcmusb0: ECHI USB controller [ 1.0000000] ehci0: 1 companion controller, 2 ports: ohci0 [ 1.0000000] ehci0: Using DMA subregion for control data structures [ 1.0000000] usb1 at ehci0: USB revision 2.0 [ 1.0000000] bcmusb0: interrupting on irq 111 [ 1.0000180] WARNING: system needs entropy for security; see entropy(7) [ 1.0100081] entropy: ready [ 1.0199997] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.0299965] uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.5399886] WARNING: 3 errors while detecting hardware; check system log. [ 1.5399886] boot device: <unknown> [ 1.5505386] root device: