Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-02-11 13:31:57
From: Ken Wellsch
Description: NetBSD 10.0 RC4/sparc64 on Sunfire V245
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0_RC4 (GENERIC) #0: Tue Feb 6 12:38:53 UTC 2024 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC [ 1.0000000] total memory = 8192 MB [ 1.0000000] avail memory = 8026 MB [ 1.0000000] mainbus0 (root): SUNW,Sun-Fire-V245 (Sun Fire V245): [_HOSTID_XXXXX] [ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 0 [ 1.0000000] cpu0: manuf 3e, impl 16, mask 34 [ 1.0000000] cpu0: system tick frequency 20 MHz [ 1.0000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.0000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 1 [ 1.0000000] cpu1: manuf 3e, impl 16, mask 34 [ 1.0000000] cpu1: system tick frequency 20 MHz [ 1.0000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.0000000] memory-controller at mainbus0 not configured [ 1.0000000] memory-controller at mainbus0 not configured [ 1.0000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13 [ 1.0000000] pyro0: pci0 at pyro0 [ 1.0000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch> [ 1.0000000] pci1 at ppb0 bus 3 [ 1.0000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci2 at ppb1 bus 4 [ 1.0000000] ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00) [ 1.0000000] ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> [ 1.0000000] pci3 at ppb2 bus 5 [ 1.0000000] ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.0000000] ohci0: interrupting at ivec 780 [ 1.0000000] ohci0: OHCI version 1.0, legacy support [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.0000000] ohci1: interrupting at ivec 780 [ 1.0000000] ohci1: OHCI version 1.0, legacy support [ 1.0000000] usb1 at ohci1: USB revision 1.0 [ 1.0000000] ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) [ 1.0000000] ehci0: interrupting at ivec 781 [ 1.0000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 [ 1.0000000] usb2 at ehci0: USB revision 2.0 [ 1.0000000] ebus0 at pci3 dev 30 function 0: Acer Labs product 1575, revision 0x00 [ 1.0000000] rtc0 at ebus0 addr 70-73: mc146818 compatible time-of-day clock: m5823 [ 1.0000000] aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8) [ 1.0000000] aceride0: using ivec 2f84 for native-PCI interrupt [ 1.0000000] atabus0 at aceride0 channel 0 [ 1.0000000] atabus1 at aceride0 channel 1 [ 1.0000000] ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci4 at ppb3 bus 6 [ 1.0000000] ppb4 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb4: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s [ 1.0000000] pci5 at ppb4 bus 7 [ 1.0000000] ppb5 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb5: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci6 at ppb5 bus 8 [ 1.0000000] ppb6 at pci6 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5) [ 1.0000000] ppb6: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> [ 1.0000000] pci7 at ppb6 bus 9 [ 1.0000000] bge0 at pci7 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge0: interrupting at ivec 3795 [ 1.0000000] bge0: HW config 00010115, 00000015, 00000000, 00000000 00000000 [ 1.0000000] bge0: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge0: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] bge1 at pci7 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge1: interrupting at ivec 3796 [ 1.0000000] bge1: HW config 00000114, 00000014, 00000000, 00000000 00000000 [ 1.0000000] bge1: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge1: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] ppb7 at pci7 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4) [ 1.0000000] pci8 at ppb7 bus 10 [ 1.0000000] ppb8 at pci1 dev 10 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb8: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci9 at ppb8 bus 11 [ 1.0000000] ppb9 at pci9 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5) [ 1.0000000] ppb9: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> [ 1.0000000] pci10 at ppb9 bus 12 [ 1.0000000] bge2 at pci10 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge2: interrupting at ivec 3796 [ 1.0000000] bge2: HW config 00010115, 00000015, 00000000, 00000000 00000000 [ 1.0000000] bge2: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge2: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy2 at bge2 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] bge3 at pci10 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge3: interrupting at ivec 3797 [ 1.0000000] bge3: HW config 00000114, 00000014, 00000000, 00000000 00000000 [ 1.0000000] bge3: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge3: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy3 at bge3 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] ppb10 at pci10 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4) [ 1.0000000] pci11 at ppb10 bus 13 [ 1.0000000] mpt0 at pci11 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02) [ 1.0000000] mpt0: interrupting at ivec 2f8f SIR ERROR: Software Initiated Reset has occurred. WARNING: sync callback did not work. Probing system devices Probing memory Probing I/O buses screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Probing system devices Probing memory Probing I/O buses Sun Fire V245, No Keyboard Copyright 2009 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.30.4, 8192 MB memory installed, Serial #xxxxxxxx. Ethernet address xx:xx:xx:xx:xx:xx, Host ID: xxxxxxxx.