Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-02-11 14:40:58
From: Ken Wellsch
Description: NetBSD 10.0 RC4/sparc64 on Sunfire V210
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 10.0_RC4 (GENERIC) #0: Tue Feb 6 12:38:53 UTC 2024
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
[ 1.0000000] total memory = 8192 MB
[ 1.0000000] avail memory = 8027 MB
[ 1.0000000] mainbus0 (root): SUNW,Sun-Fire-V210 (Sun Fire V210): [_HOSTID_XXXXX]
[ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1336 MHz, CPU id 0
[ 1.0000000] cpu0: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu0: system tick frequency 12 MHz
[ 1.0000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1336 MHz, CPU id 1
[ 1.0000000] cpu1: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu1: system tick frequency 12 MHz
[ 1.0000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] schizo0 at mainbus0: addr 4000ff00000: Tomatillo, version 4, ign 7c0, bus B 0 to 0
[ 1.0000000] schizo0: pci0 at schizo0
[ 1.0000000] bge0 at pci0 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
[ 1.0000000] bge0: interrupting at ivec 37c8
[ 1.0000000] bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
[ 1.0000000] bge0: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
[ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] bge1 at pci0 dev 2 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
[ 1.0000000] bge1: interrupting at ivec 37c9
[ 1.0000000] bge1: HW config 00000000, 00000000, 00000000, 00000000 00000000
[ 1.0000000] bge1: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
[ 1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] schizo1 at mainbus0: addr 4000f600000: Tomatillo, version 4, ign 780, bus A 0 to 0
[ 1.0000000] schizo1: pci1 at schizo1
[ 1.0000000] ebus0 at pci1 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
[ 1.0000000] flashprom at ebus0 addr 0-fffff, 290-290 not configured
[ 1.0000000] rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819p
[ 1.0000000] pcfiic0 at ebus0 addr 320-321 ipl 2e
[ 1.0000000] iic0 at pcfiic0: I2C bus
[ 1.0000000] i2c-bridge (SUNW,i2c-imax) at iic0 addr 0x0b not configured
[ 1.0000000] i2c-bridge (SUNW,i2c-imax) at iic0 addr 0x0c not configured
[ 1.0000000] seeprom0 at iic0 addr 0x51: motherboard-fru-prom: size 8192
[ 1.0000000] seeprom1 at iic0 addr 0x54: chassis-fru-prom: size 8192
[ 1.0000000] seeprom2 at iic0 addr 0x58: power-supply-fru-prom: size 8192
[ 1.0000000] spdmem0 at iic0 addr 0x5b
[ 1.0000000] spdmem0: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] spdmem1 at iic0 addr 0x5c
[ 1.0000000] spdmem1: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] spdmem2 at iic0 addr 0x5d
[ 1.0000000] spdmem2: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] spdmem3 at iic0 addr 0x5e
[ 1.0000000] spdmem3: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] spdmem4 at iic0 addr 0x63
[ 1.0000000] spdmem4: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] spdmem5 at iic0 addr 0x64
[ 1.0000000] spdmem5: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] spdmem6 at iic0 addr 0x65
[ 1.0000000] spdmem6: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] spdmem7 at iic0 addr 0x66
[ 1.0000000] spdmem7: DDR SDRAM (registered), data ECC, 1GB, 333MHz (PC-2700)
[ 1.0000000] rscrtc (i2c-ds1307) at iic0 addr 0x68 not configured
[ 1.0000000] seeprom3 at iic0 addr 0x28: nvram: size 8192
[ 1.0000000] pcagpio0 at iic0 addr 0x22: PCA9555
[ 1.0000000] pcagpio1 at iic0 addr 0x23: PCA9555
[ 1.0000000] pcagpio2 at iic0 addr 0x34: PCA9555
[ 1.0000000] pcagpio3 at iic0 addr 0x38: PCA9556
[ 1.0000000] adm1026hm0 at iic0 addr 0x2e: ADM1026 hardware monitor: rev. 0x4, step. 0x5
[ 1.0000000] adm1026hm0: 8 fans, 3 temperatures, 15 voltages
[ 1.0000000] lmtemp0 at iic0 addr 0x4e: temperature-sensor LM75 Temperature Sensor
[ 1.0000000] power at ebus0 addr 800-82f ipl 20 not configured
[ 1.0000000] com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, 16-byte FIFO
[ 1.0000000] rmc-comm at ebus0 addr 3e8-3ef ipl 2c not configured
[ 1.0000000] alipm0 at pci1 dev 6 function 0: 223KHz clock
[ 1.0000000] iic1 at alipm0: I2C bus
[ 1.0000000] ohci0 at pci1 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.0000000] ohci0: interrupting at ivec 7a7
[ 1.0000000] ohci0: OHCI version 1.0, legacy support
[ 1.0000000] usb0 at ohci0: USB revision 1.0
[ 1.0000000] aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
[ 1.0000000] aceride0: using ivec 2f98 for native-PCI interrupt
[ 1.0000000] atabus0 at aceride0 channel 0
[ 1.0000000] atabus1 at aceride0 channel 1
[ 1.0000000] schizo2 at mainbus0: addr 4000e600000: Tomatillo, version 4, ign 700, bus A 0 to 0
[ 1.0000000] schizo2: pci2 at schizo2
[ 1.0000000] esiop0 at pci2 dev 2 function 0: Symbios Logic 53c1010-66 (ultra3-wide scsi)
[ 1.0000000] esiop0: using on-board RAM
[ 1.0000000] esiop0: interrupting at ivec 2f29
[ 1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target
[ 1.0000000] esiop1 at pci2 dev 2 function 1: Symbios Logic 53c1010-66 (ultra3-wide scsi)
[ 1.0000000] esiop1: using on-board RAM
[ 1.0000000] esiop1: interrupting at ivec 2f28
[ 1.0000000] scsibus1 at esiop1: 16 targets, 8 luns per target
[ 1.0000000] schizo3 at mainbus0: addr 4000ef00000: Tomatillo, version 4, ign 740, bus B 0 to 0
[ 1.0000000] schizo3: pci3 at schizo3
[ 1.0000000] bge2 at pci3 dev 2 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
[ 1.0000000] bge2: interrupting at ivec 375c
[ 1.0000000] bge2: HW config 00000000, 00000000, 00000000, 00000000 00000000
[ 1.0000000] bge2: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] brgphy2 at bge2 phy 1: BCM5704 1000BASE-T media interface, rev. 0
[ 1.0000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] bge3 at pci3 dev 2 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
[ 1.0000000] bge3: interrupting at ivec 375d
[ 1.0000000] bge3: HW config 00000000, 00000000, 00000000, 00000000 00000000
[ 1.0000000] bge3: ASIC BCM5704 A3 (0x2003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] brgphy3 at bge3 phy 1: BCM5704 1000BASE-T media interface, rev. 0
[ 1.0000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] pcons at mainbus0 not configured
[ 1.0000000] esiop1: switching to single-ended mode
[ 1.0000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000177] No counter-timer -- using %stick at 12MHz as system clock.
[ 1.9139560] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.9139560] scsibus0: waiting 2 seconds for devices to settle...
[ 1.9139560] scsibus1: waiting 2 seconds for devices to settle...
[ 4.3200076] sd0 at scsibus0 target 0 lun 0: <IBM, IC35L073UCDY10-0, S25Q> disk fixed
[ 4.4117309] sd0: 70007 MB, 36703 cyl, 6 head, 651 sec, 512 bytes/sect x 143374805 sectors
[ 4.5200095] sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
[ 9.9100070] cd0 at scsibus1 target 4 lun 0: <ZULUSCSI, CDROM, 2.0> cdrom removable
[ 10.0000071] cd0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
[ 10.0900074] cd1 at scsibus1 target 5 lun 0: <ZULUSCSI, CDROM, 2.0> cdrom removable
[ 10.1800071] cd1: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
[ 10.2605139] cd2 at scsibus1 target 6 lun 0: <ZULUSCSI, CDROM, 2.0> cdrom removable
[ 10.3500077] cd2: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
[ 12.7800071] swwdog0: software watchdog initialized
[ 12.8700071] root on cd1a dumps on cd1b
[ 12.9400079] root file system type: cd9660
[ 12.9871937] kern.module.path=/stand/sparc64/10.0/modules
[ 13.0506191] entropy: best effort
Created tmpfs /dev (835584 byte, 1600 inodes)
init: kernel sec
You are using a serial console, we do not know your terminal emulation.
Please select one, typical values are:
vt100
ansi
xterm
Terminal type (just hit ENTER for 'vt220'):