Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-02-28 12:27:09
From: yamori813
Description: pcDuino
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0_RC4 (GENERIC) #0: Wed Feb 28 21:00:17 JST 2024 [ 1.000000] hiroki@netbsd:/usr/home/hiroki/netbsd-10/sys/arch/evbarm/compile/obj/GENERIC [ 1.000000] total memory = 512 MB [ 1.000000] avail memory = 486 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: LinkSprite pcDuino [ 1.000000] simplebus1 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] simplebus3 at simplebus0 [ 1.000000] cpu0 at cpus0: Cortex-A8 r3p2 (Cortex V7A core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu0: L1 32KB/64B 4-way (128 set) VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 4-way (128 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu0: L2 256KB/64B 8-way (512 set) write-through PIPT Unified cache [ 1.000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.000000] cpufreqdt0 at cpu0 [ 1.000000] sunxiintc0 at simplebus1: Interrupt Controller [ 1.000000] fclock0 at simplebus2: 24000000 Hz fixed clock (osc24M) [ 1.000000] fclock1 at simplebus2: 32768 Hz fixed clock (osc32k) [ 1.000000] sun4ia10ccu0 at simplebus1: A10 CCU [ 1.000000] sunxigpio0 at simplebus1: PIO [ 1.000000] gpio0 at sunxigpio0: 175 pins [ 1.000000] sunxigpio0: interrupting on INTC irq 28 [ 1.000000] sun4idma0 at simplebus1: DMA controller [ 1.000000] sun4idma0: interrupting on INTC irq 27 [ 1.000000] sunxisramc0 at simplebus1: SRAM Controller [ 1.000000] sunxisramc0: area: SRAM A3/A4 [ 1.000000] sunxisramc0: area: SRAM D [ 1.000000] sunxidebe0 at simplebus1: Display Engine Backend (display-backend@1e60000) [ 1.000000] sunxidebe1 at simplebus1: Display Engine Backend (display-backend@1e40000) [ 1.000000] sunxitcon0 at simplebus1: LCD/TV timing controller (lcd-controller@1c0c000) [ 1.000000] sunxitcon0: tcon unit 0 [ 1.000000] sunxidebe0: debe unit 0 [ 1.000000] sunxidebe1: debe unit 1 [ 1.000000] sunxitcon1 at simplebus1: LCD/TV timing controller (lcd-controller@1c0d000) [ 1.000000] sunxitcon1: tcon unit 1 [ 1.000000] sunxisid0 at simplebus1: Security ID EFUSE [ 1.000000] com0 at simplebus1: DesignWare APB UART, 64-byte FIFO [ 1.000000] com0: console [ 1.000000] com0: interrupting on INTC irq 1 [ 1.000000] fregulator0 at simplebus0: vcc3v3 [ 1.000000] fregulator1 at simplebus0: vcc5v0 [ 1.000000] fregulator2 at simplebus0: vcc3v0 [ 1.000000] sunxiusbphy0 at simplebus1: USB PHY [ 1.000000] sunxitwi0 at simplebus1: Marvell TWSI controller [ 1.000000] sunxitwi0: interrupting on INTC irq 7 [ 1.000000] iic0 at sunxitwi0: I2C bus [ 1.000000] axp20x0 at iic0 addr 0x34: AC used [ 1.000000] axp20x0: DCDC2 1400mV [ 1.000000] axp20x0: DCDC3 1250mV [ 1.000000] axp20x0: LDO2 3000mV, LDO4 3300mV [ 1.000000] axp20x0: LDO3 2800mV [ 1.000000] axp20xreg0 at axp20x0: dcdc2 (vdd-cpu) [ 1.000000] axp20xreg1 at axp20x0: dcdc3 (vdd-int-dll) [ 1.000000] sunxits0 at simplebus1: Touch Screen Controller [ 1.000000] sunxits0: interrupting on INTC irq 29 [ 1.000000] /soc/display-frontend@1e00000 at simplebus1 not configured [ 1.000000] /soc/display-frontend@1e20000 at simplebus1 not configured [ 1.000000] /soc/mdio@1c0b080 at simplebus1 not configured [ 1.000000] emac0 at simplebus1: 10/100 Ethernet Controller [ 1.000000] emac0: interrupting on INTC irq 55 [ 1.000000] emac0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] rlphy0 at emac0 phy 1: IP101 10/100 PHY, rev. 4 [ 1.000000] rlphy0: 10baseT-FDX, 100baseTX [ 1.000000] ifmedia_set: no match for 0x20/0xffffffff [ 1.000000] sunximmc0 at simplebus1: SD/MMC controller [ 1.000000] sunximmc0: interrupting on INTC irq 32 [ 1.000000] motg0 at simplebus1: 'otg' mode not supported [ 1.000000] ehci0 at simplebus1: EHCI [ 1.000000] ehci0: interrupting on INTC irq 39 [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 1 companion controller, 1 port [ 1.000000] usb0 at ehci0: USB revision 2.0 [ 1.000000] ohci0 at simplebus1: OHCI [ 1.000000] ohci0: interrupting on INTC irq 64 [ 1.000000] ohci0: OHCI version 1.0 [ 1.000000] usb1 at ohci0: USB revision 1.0 [ 1.000000] /soc/crypto-engine@1c15000 at simplebus1 not configured [ 1.000000] ehci1 at simplebus1: EHCI [ 1.000000] ehci1: interrupting on INTC irq 40 [ 1.000000] ehci1: EHCI version 1.0 [ 1.000000] ehci1: 1 companion controller, 1 port [ 1.000000] usb2 at ehci1: USB revision 2.0 [ 1.000000] ohci1 at simplebus1: OHCI [ 1.000000] ohci1: interrupting on INTC irq 65 [ 1.000000] ohci1: OHCI version 1.0 [ 1.000000] usb3 at ohci1: USB revision 1.0 [ 1.000000] sunxiwdt0 at simplebus1: Watchdog [ 1.000000] sunxiwdt0: default watchdog period is 16 seconds [ 1.000000] sunxirtc0 at simplebus1: RTC [ 1.000000] /soc/gpu@1c40000 at simplebus1 not configured [ 1.000000] armpmu0 at simplebus0: Performance Monitor Unit [ 1.000000] gpioleds0 at simplebus0: pcduino:green:tx pcduino:green:rx [ 1.000000] gpiokeys0 at simplebus0: Key Back, Key Home, Key Menu [ 1.000000] wskbd0 at gpiokeys0 mux 1 [ 1.000000] /soc/video-codec@1c0e000 at simplebus1 not configured [ 1.000000] sunxitimer0 at simplebus1: Timer [ 1.000000] timecounter: Timecounter "Timer 2" frequency 24000000 Hz quality 200 [ 1.000004] timecounter: Timecounter "LOSC" frequency 32768 Hz quality 150 [ 1.000004] sunxitimer0: interrupting on INTC irq 22 [ 1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000004] cpufreqdt0: rate: 1008.000 MHz, 1400000 uV [ 1.014727] sdmmc0 at sunximmc0 [ 1.019995] armpmu0: interrupting on INTC irq 3 [ 1.030570] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.039993] uhub0: 1 port with 1 removable, self powered [ 1.039993] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.039993] uhub1: 1 port with 1 removable, self powered [ 1.049993] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.049993] uhub2: 1 port with 1 removable, self powered [ 1.049993] uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.061856] uhub3: 1 port with 1 removable, self powered [ 1.070002] WARNING: system needs entropy for security; see entropy(7) [ 1.070002] IPsec: Initialized Security Association Processing. [ 1.129985] sdmmc0: SD card status: 4-bit, C4 [ 1.140332] ld0 at sdmmc0: <0x02:0x544d:SA08G:0x04:0x9c800172:0x0a5> [ 1.140332] ld0: 7604 MB, 3862 cyl, 64 head, 63 sec, 512 bytes/sect x 15572992 sectors [ 1.159989] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.569985] swwdog0: software watchdog initialized [ 1.589989] boot device: ld0 [ 1.589989] root on ld0a dumps on ld0b [ 1.609998] root file system type: ffs [ 1.619991] kern.module.path=/stand/evbarm/10.0/modules [ 1.619991] WARNING: preposterous TOD clock time [ 1.631802] WARNING: using filesystem time [ 1.635867] WARNING: CHECK AND RESET THE DATE! [ 3.239992] entropy: best effort