Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-02-29 04:13:23
From: yamori813
Description: WZR-1750DHP add gpio driver
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0_RC4 (WZR-1750DHP) #14: Thu Feb 29 13:09:29 JST 2024 [ 1.000000] hiroki@netbsd:/usr/home/hiroki/netbsd-10/sys/arch/evbarm/compile/obj/WZR-1750DHP [ 1.000000] total memory = 128 MB [ 1.000000] avail memory = 113 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0 core 0: 800 MHz Cortex-A9 r3p0 (Cortex V7A core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.000000] cpu0: L2 256KB/32B 16-way (512 set) write-back-locking-D PIPT Unified cache [ 1.000000] cpu0: unrecognized VFP version 0 [ 1.000000] armperiph0 at mainbus0 [ 1.000000] arml2cc0 at armperiph0: ARM PL310 r3p2 L2 Cache Controller [ 1.000000] armgic0 at armperiph0: Generic Interrupt Controller, 256 sources (245 valid) [ 1.000000] armgic0: 32 Priorities, 224 SPIs, 5 PPIs, 16 SGIs [ 1.000000] arma9tmr0 at armperiph0: A9 Global 64-bit Timer (400 MHz) [ 1.000000] arma9tmr0: interrupting on irq 27 [ 1.000000] bcmcca0 at mainbus0: BCM53010 (Rev A0) [ 1.000000] bcmcca0: interrupting at irq 117 [ 1.000000] com0 at bcmcca0 channel 0: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at bcmcca0 channel 1: ns16550a, 16-byte FIFO [ 1.000000] gpio0 at bcmcca0: 24 pins [ 1.000000] bcmccb0 at mainbus0 [ 1.000000] bcmmdio0 at bcmccb0: MDIO bus @ 2 MHz [ 1.000000] bcmrng0 at bcmccb0: Random Number Generator (512 bit FIFO) [ 1.000000] bcmccb0: Robo Switch init 53011 [ 1.000000] bcmi2c0 at bcmccb0 [ 1.000000] bcmdmu0 at bcmccb0 [ 1.000000] amac0 at bcmccb0 port 0: Gigabit Ethernet Controller [ 1.000000] bcmpax0 at bcmccb0 port 0: PCI Express V2 1-lane RC Controller [ 1.000000] bcmpax0: interrupting on irqs 159-164 [ 1.000000] bcmpax0: iwin[1]=0/0 iwin[2]=0/0 [ 1.000000] pci0 at bcmpax0 bus 0 [ 1.000000] pci0: memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] ppb0 at pci0 dev 0 function 0: Broadcom product 8011 (rev. 0x00) [ 1.000000] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.000000] pci1 at ppb0 bus 1 [ 1.000000] pci1: memory space enabled, rd/line, wr/inv ok [ 1.000000] Broadcom product 4360 (miscellaneous network, revision 0x03) at pci1 dev 0 function 0 not configured [ 1.000000] bcmpax1 at bcmccb0 port 1: PCI Express V2 1-lane RC Controller [ 1.000000] bcmpax1: interrupting on irqs 165-170 [ 1.000000] bcmpax1: iwin[1]=0/0 iwin[2]=0/0 [ 1.000000] pci2 at bcmpax1 bus 0 [ 1.000000] pci2: memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] ppb1 at pci2 dev 0 function 0: Broadcom product 8011 (rev. 0x00) [ 1.000000] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.000000] pci3 at ppb1 bus 1 [ 1.000000] pci3: memory space enabled, rd/line, wr/inv ok [ 1.000000] Broadcom product 4331 (miscellaneous network, revision 0x02) at pci3 dev 0 function 0 not configured [ 1.000000] sdhc0 at bcmccb0: SDHC controller [ 1.000000] sdhc0: SDHC 3.0, rev 169, caps <07eec8b0/03002177>, PIO, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 1.8V 3.0V 3.3V, re-tuning mode 1 (1s timer), 2048 byte blocks [ 1.000000] sdmmc0 at sdhc0 slot 0 [ 1.000000] sdhc0: interrupting on irq 177 [ 1.000000] bcmusb0 at bcmccb0 [ 1.000000] ohci0 at bcmusb0: OHCI USB controller [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] ehci0 at bcmusb0: ECHI USB controller [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 1 companion controller, 2 ports: ohci0 [ 1.000000] ehci0: Using DMA subregion for control data structures [ 1.000000] usb1 at ehci0: USB revision 2.0 [ 1.000000] bcmusb0: interrupting on irq 111 [ 1.000000] bcmxusb0 at bcmccb0 [ 1.000000] xhci0 at bcmxusb0: XHCI USB controller [ 1.000000] xhci0: xHCI version 1.0 [ 1.000000] usb2 at xhci0: USB revision 3.0 [ 1.000000] usb3 at xhci0: USB revision 2.0 [ 1.000000] bcmxusb0: interrupting on irq 112 [ 1.000000] timecounter: Timecounter "arma9tmr0" frequency 400000000 Hz quality 500 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] uhub0 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.010414] entropy: ready [ 1.010414] uhub0: 1 port with 1 removable, self powered [ 1.010414] uhub1 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.022861] uhub1: 0 ports with 0 removable, self powered [ 1.022861] autoconfiguration error: usb3: root device is not a hub [ 1.022861] uhub2 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.035341] uhub2: 2 ports with 2 removable, self powered [ 1.035341] uhub3 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.045017] uhub3: 2 ports with 2 removable, self powered [ 2.159972] umass0 at uhub3 port 1 configuration 1 interface 0 [ 2.171394] umass0: vendor 0000 (0x0000) product 0000 (0x0000), rev 2.00/0.00, addr 2 [ 2.180712] umass0: using SCSI over Bulk-Only [ 3.369971] scsibus0 at umass0: 2 targets, 1 lun per target [ 3.379978] sd0 at scsibus0 target 0 lun 0: <Maxtor 6, Y160L0, YAR4> disk fixed [ 3.389976] sd0: fabricating a geometry [ 3.389976] sd0: 152 GB, 156334 cyl, 64 head, 32 sec, 512 bytes/sect x 320173056 sectors [ 3.405322] sd0: fabricating a geometry [ 3.489972] WARNING: 1 error while detecting hardware; check system log. [ 3.504099] boot device: <unknown> [ 3.504099] root on sd0a dumps on sd0b [ 3.549977] kern.module.path=/stand/evbarm/10.0/modules [ 3.564686] WARNING: no TOD clock present [ 3.564686] WARNING: using filesystem time [ 3.573100] WARNING: CHECK AND RESET THE DATE! [ 3.689978] 1.1(init): trap: signo=10 code=2 addr=0x7fffeb58 trap=0x1c06 [ 3.703676] r0=7fffeff0 r1=00000000 r2=00000000 r3=00000000 [ 3.703676] r4=00000000 r5=00000000 r6=00000000 r7=00000000 [ 3.715139] r8=00000000 r9=00000000 rA=00000000 rB=00000000 [ 3.720871] ip=7fffeb58 sp=7fffeb58 lr=7bed0588 pc=7bed0588 spsr=00000010