Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-03-11 18:25:00
From: robert
Description: FreeBSD/amd64 on Micro-Star International Co., Ltd. MS-7A34
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-STABLE #23 stable/14-n266882-1e74fc950419: Sun Feb 25 16:40:41 CST 2024
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 9 5900X 12-Core Processor (3700.19-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0xa20f12 Family=0x19 Model=0x21 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID>
Structured Extended Features3=0x10<FSRM>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x111ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66759802880 (63667 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 22 23 14 13 12 15 17 19 21 18 16 20 1 3 7 8 11 4 2 6 9 10 5
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xbdc05000-0xbdc0501e
smbios0: Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <AMD 300 Series USB 3.1 controller> mem 0xfcea0000-0xfcea7fff at device 0.0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD 300 Series AHCI SATA controller> mem 0xfce80000-0xfce9ffff at device 0.1 on pci2
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci3
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0x7c00000000-0x7dffffffff,0x7e00000000-0x7e001fffff,0xfcd00000-0xfcd3ffff at device 0.0 on pci6
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcd60000-0xfcd63fff at device 0.1 on pci6
pcib7: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci7: <ACPI PCI bus> on pcib7
igb0: <Intel(R) I350 (Copper)> mem 0xfc700000-0xfc7fffff,0xfc904000-0xfc907fff at device 0.0 on pci7
igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd0
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) I350 (Copper)> mem 0xfc600000-0xfc6fffff,0xfc900000-0xfc903fff at device 0.1 on pci7
igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd0
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <AMD Matisse USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcc00000-0xfcc07fff at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1849988870 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen1.1: <AMD XHCI root HUB> at usbus1
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm7: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
nda0 at nvme0 bus 0 scbus4 target 0 lun 1
nda0: <Micron_2210_MTFDHBA512QFD P6MA001 21202F4BDBF9>
nda0: [_SERIAL_NUMBER_XXXXXXXXX]
nda0: nvme version 1.3
nda0: 488386MB (1000215216 512 byte sectors)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <Hitachi HDS721010CLA332 JP4OA3MA> ATA8-ACS SATA 2.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
ada3: <Hitachi HDS721010CLA332 JP4OA39C> ATA8-ACS SATA 2.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953868MB (1953523055 512 byte sectors)
Trying to mount root from zfs:mars/ROOT/default []...
uhub1: 8 ports with 8 removable, self powered
uhub0: 22 ports with 22 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 1> on usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <Logitech USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus0
kbd2 at ukbd0
ugen0.4: <Logitech USB Receiver> at usbus0
Root mount waiting for: usbus0
ugen0.5: <American Power Conversion Back-UPS ES 750 FW:841.I3 .D USB FW:I3> at usbus0
Root mount waiting for: usbus0
amdsmn0: <AMD Family 19h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
amdiommu0 at device 0.2 on pci0
AMD-Vi: IVRS Info VAsize = 64 PAsize = 48 GVAsize = 2 flags:0
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ivhd0: <AMD-Vi/IOMMU ivhd in mixed format> on acpi0
ivhd0: Unknown dev entry:0xf0
Variable size IVHD type 0xf0 not supported
ivhd0: Flag:b0<IotlbSup,Coherent>
ivhd0: Features(type:0x40) MsiNumPPR = 0 PNBanks= 2 PNCounters= 0
ivhd0: Extended features[31:0]:22294a5a<PPRSup,NXSup,GTSup,IASup,PCSup> HATS = 0x2 GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup = 0x2 DualEventLogSup = 0x2
ivhd0: Extended features[62:32]:58f77ef<USSup,PprOvrflwEarlySup,PPRAutoRspSup,BlKStopMrkSup,PerfOptSup,MsiCapMmioSup,GIOSup,HASup,EPHSup,AttrFWSup> Max PASID: 0x2f DevTblSegSup = 0x3 MarcSup = 0x1
ivhd0: supported paging level:7, will use only: 4
ivhd0: device [0x8 - 0xfffe] config:0
ivhd0: device [0xff00 - 0xffff] config:0
ivhd0: PCI cap 0x190b640f@0x40 feature:19<IOTLB,EFR,CapExt>
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7).
drmn0: Trusted Memory Zone (TMZ) feature not supported
[drm] register mmio base: 0xFCD00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
drmn0: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-58085SHB1-W91
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 256 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=8192M
[drm] RAM width 256bits GDDR5
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] Display Core initialized with v3.2.149!
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
drmn0: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36
[drm] fb mappable at 0x7C00830000
[drm] vram apper at 0x7C00000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1024 width=1280 depth=32
pbase=0x7c00830000 vbase=0xfffffe0200c30000
name=drmn0 flags=0x0 stride=5120 bpp=32
end FB_INFO
vgapci0: child drmn0 requested pci_get_powerstate
drmn0: Using BACO for runtime pm
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic5: <LinuxKPI I2C> on drm1
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drm2
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drm3
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
[drm] Initialized amdgpu 3.42.0 20150101 for drmn0 on minor 0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
igb0: link state changed to UP
igb1: link state changed to UP
lo0: link state changed to UP
igb0: link state changed to DOWN
uhid0 on uhub2
uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 3> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid1 on uhub2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 3> on usbus0
igb0: link state changed to UP
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge0: changing name to 'vm-public'
vm-public: link state changed to UP
igb1: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)
pid 64643 (conftest), jid 5, uid 65534: exited on signal 11 (no core dump - bad address)
pid 5195 (conftest), jid 5, uid 65534: exited on signal 11 (no core dump - bad address)
pid 50590 (conftest), jid 5, uid 65534: exited on signal 11 (no core dump - bad address)
pid 64953 (conftest), jid 3, uid 65534: exited on signal 11 (no core dump - bad address)
pid 44659 (mate-settings-daemo), jid 0, uid 1000: exited on signal 10 (no core dump - bad address)
pid 1903 (conftest), jid 15, uid 65534: exited on signal 11 (no core dump - bad address)
pid 23284 (conftest), jid 15, uid 65534: exited on signal 11 (no core dump - bad address)
pid 92509 (conftest), jid 15, uid 65534: exited on signal 11 (no core dump - bad address)
pid 28447 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 28451 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 28472 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 83957 (conftest), jid 25, uid 65534: exited on signal 11 (no core dump - bad address)
pid 44792 (conftest), jid 29, uid 65534: exited on signal 11 (no core dump - bad address)
pid 45850 (conftest), jid 25, uid 65534: exited on signal 11 (no core dump - bad address)
pid 5693 (conftest), jid 29, uid 65534: exited on signal 11 (no core dump - bad address)
pid 78607 (conftest), jid 0, uid 0: exited on signal 11 (no core dump - bad address)
pid 28212 (mate-settings-daemo), jid 0, uid 1000: exited on signal 10 (no core dump - bad address)
pid 82344 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 82288 (mate-settings-daemo), jid 0, uid 1000: exited on signal 10 (no core dump - bad address)
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: promiscuous mode enabled
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: promiscuous mode enabled
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: promiscuous mode enabled
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: promiscuous mode enabled
tap0: link state changed to UP
pid 90727 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65275 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65282 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65283 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65285 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65286 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65288 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65289 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65290 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65292 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65294 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65297 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65306 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65308 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65312 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65313 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65317 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65318 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65319 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65320 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65321 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65322 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65324 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65325 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65330 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65332 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65333 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65334 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65335 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65336 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65337 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65338 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65348 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65350 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65351 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65352 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65354 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65358 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65359 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 65360 (firefox), jid 0, uid 1000: exited on signal 11 (no core dump - bad address)
pid 90664 (mate-settings-daemo), jid 0, uid 1000: exited on signal 10 (no core dump - bad address)
ugen1.2: <Asmedia ASM107x> at usbus1
uhub3 on uhub1
uhub3: <Asmedia ASM107x, class 9/0, rev 2.10/1.00, addr 1> on usbus1
uhub3: MTT enabled
uhub3: 4 ports with 4 removable, self powered
ugen1.3: <Asmedia ASM107x> at usbus1
uhub4 on uhub1
uhub4: <Asmedia ASM107x, class 9/0, rev 3.00/1.00, addr 2> on usbus1
uhub4: 4 ports with 4 removable, self powered
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ASMT ASM105X (0x174c:0x55aa)
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device ASMT ASM105X (0x174c:0x55aa)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device ASMT ASM105X (0x174c:0x55aa)
ugen1.4: <ASMT ASM105X> at usbus1
umass0 on uhub4
umass0: <ASMT ASM105X, class 0/0, rev 3.10/1.00, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4101
umass0:5:0: Attached to scbus5
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <ASMT ASM105X 0> Removable Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub0, port 12, addr 1 (disconnected)
ugen0.3: <Logitech USB Keyboard> at usbus0 (disconnected)
ukbd0: at uhub2, port 1, addr 2 (disconnected)
ukbd0: detached
uhid0: at uhub2, port 1, addr 2 (disconnected)
uhid0: detached
ugen0.4: <Logitech USB Receiver> at usbus0 (disconnected)
ums0: at uhub2, port 4, addr 3 (disconnected)
ums0: detached
uhid1: at uhub2, port 4, addr 3 (disconnected)
uhid1: detached
uhub2: detached
igb0: link state changed to DOWN
igb0: link state changed to UP
ugen1.2: <Asmedia ASM107x> at usbus1 (disconnected)
uhub3: at uhub1, port 1, addr 1 (disconnected)
uhub3: detached
ugen1.3: <Asmedia ASM107x> at usbus1 (disconnected)
uhub4: at uhub1, port 5, addr 2 (disconnected)
ugen1.4: <ASMT ASM105X> at usbus1 (disconnected)
umass0: at uhub4, port 3, addr 3 (disconnected)
da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
da0: <ASMT ASM105X 0> s/n 000000000001 detached
(da0:umass-sim0:0:0:0): Periph destroyed
umass0: detached
uhub4: detached
pid 24682 (conftest), jid 53, uid 65534: exited on signal 11 (no core dump - bad address)
pid 26915 (conftest), jid 57, uid 65534: exited on signal 11 (no core dump - bad address)
pid 8710 (conftest), jid 53, uid 65534: exited on signal 11 (no core dump - bad address)
pid 12856 (conftest), jid 55, uid 65534: exited on signal 11 (no core dump - bad address)
pid 84029 (conftest), jid 55, uid 65534: exited on signal 11 (no core dump - bad address)
pid 19170 (conftest), jid 57, uid 65534: exited on signal 11 (no core dump - bad address)
pid 83641 (conftest), jid 59, uid 65534: exited on signal 11 (no core dump - bad address)
pid 4915 (conftest), jid 55, uid 65534: exited on signal 11 (no core dump - bad address)
pid 7918 (conftest), jid 53, uid 65534: exited on signal 11 (no core dump - bad address)
pid 11511 (conftest), jid 53, uid 65534: exited on signal 11 (no core dump - bad address)
bridge1: Ethernet address: [_MAC_XXXXXXXXXX]
bridge2: Ethernet address: [_MAC_XXXXXXXXXX]
bridge3: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: promiscuous mode disabled
tap0: promiscuous mode disabled
vm-public: link state changed to DOWN
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge1: Ethernet address: [_MAC_XXXXXXXXXX]
bridge1: changing name to 'vm-public'
vm-public: link state changed to UP
igb1: promiscuous mode enabled
igb0: link state changed to DOWN
igb0: link state changed to UP
tap0: promiscuous mode enabled
igb1: link state changed to DOWN
igb1: link state changed to UP
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 5> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.3: <Logitech USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 6> on usbus0
kbd2 at ukbd0
uhid0 on uhub2
uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 6> on usbus0
ugen0.4: <Logitech USB Receiver> at usbus0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 7> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid1 on uhub2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 7> on usbus0
tap0: link state changed to DOWN
tap0: link state changed to UP
pid 10786 (conftest), jid 64, uid 65534: exited on signal 11 (no core dump - bad address)
pid 53850 (conftest), jid 64, uid 65534: exited on signal 11 (no core dump - bad address)
pid 62886 (conftest), jid 68, uid 65534: exited on signal 11 (no core dump - bad address)
pid 54587 (conftest), jid 64, uid 65534: exited on signal 11 (no core dump - bad address)
pid 80333 (conftest), jid 76, uid 65534: exited on signal 11 (no core dump - bad address)
pid 97336 (conftest), jid 78, uid 65534: exited on signal 11 (no core dump - bad address)
pid 3772 (conftest), jid 76, uid 65534: exited on signal 11 (no core dump - bad address)
pid 27264 (conftest), jid 76, uid 65534: exited on signal 11 (no core dump - bad address)
pid 70119 (conftest), jid 101, uid 65534: exited on signal 11 (no core dump - bad address)
pid 3156 (conftest), jid 98, uid 65534: exited on signal 11 (no core dump - bad address)
pid 20256 (conftest), jid 101, uid 65534: exited on signal 11 (no core dump - bad address)
pid 35613 (conftest), jid 101, uid 65534: exited on signal 11 (no core dump - bad address)
pid 37909 (conftest), jid 100, uid 65534: exited on signal 11 (no core dump - bad address)
pid 1879 (conftest), jid 100, uid 65534: exited on signal 11 (no core dump - bad address)
pid 5558 (conftest), jid 100, uid 65534: exited on signal 11 (no core dump - bad address)
pid 35784 (conftest), jid 98, uid 65534: exited on signal 11 (no core dump - bad address)
pid 11318 (conftest), jid 100, uid 65534: exited on signal 11 (no core dump - bad address)
pid 8846 (conftest), jid 110, uid 65534: exited on signal 11 (no core dump - bad address)
pid 80550 (conftest), jid 110, uid 65534: exited on signal 11 (no core dump - bad address)
pid 802 (conftest), jid 110, uid 65534: exited on signal 11 (no core dump - bad address)
pid 10641 (conftest), jid 116, uid 65534: exited on signal 11 (no core dump - bad address)
pid 80001 (conftest), jid 110, uid 65534: exited on signal 11 (no core dump - bad address)
pid 39273 (mate-settings-daemo), jid 0, uid 1000: exited on signal 10 (no core dump - bad address)
pid 84192 (conftest), jid 112, uid 65534: exited on signal 11 (no core dump - bad address)
pid 57711 (conftest), jid 116, uid 65534: exited on signal 11 (no core dump - bad address)
pid 93445 (conftest), jid 110, uid 65534: exited on signal 11 (no core dump - bad address)
pid 77769 (conftest), jid 154, uid 65534: exited on signal 11 (no core dump - bad address)
pid 67635 (conftest), jid 192, uid 65534: exited on signal 11 (no core dump - bad address)
pid 22634 (conftest), jid 212, uid 65534: exited on signal 11 (no core dump - bad address)
pid 98808 (conftest), jid 236, uid 65534: exited on signal 11 (no core dump - bad address)
pid 41484 (conftest), jid 256, uid 65534: exited on signal 11 (no core dump - bad address)
pid 85167 (conftest), jid 260, uid 65534: exited on signal 11 (no core dump - bad address)
pid 57310 (conftest), jid 274, uid 65534: exited on signal 11 (no core dump - bad address)
pid 25335 (conftest), jid 294, uid 65534: exited on signal 11 (no core dump - bad address)
pid 26221 (conftest), jid 306, uid 65534: exited on signal 11 (no core dump - bad address)
pid 90779 (conftest), jid 294, uid 65534: exited on signal 11 (no core dump - bad address)
pid 70456 (conftest), jid 310, uid 65534: exited on signal 11 (no core dump - bad address)
pid 32692 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 68571 (conftest), jid 306, uid 65534: exited on signal 11 (no core dump - bad address)
pid 47048 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 83875 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 83625 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 57901 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 61805 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 29217 (conftest), jid 304, uid 65534: exited on signal 11 (no core dump - bad address)
pid 42894 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 49803 (conftest), jid 308, uid 65534: exited on signal 11 (no core dump - bad address)
pid 45269 (conftest), jid 304, uid 65534: exited on signal 11 (no core dump - bad address)
pid 82828 (conftest), jid 327, uid 65534: exited on signal 11 (no core dump - bad address)
pid 37838 (conftest), jid 327, uid 65534: exited on signal 11 (no core dump - bad address)
pid 9194 (conftest), jid 327, uid 65534: exited on signal 11 (no core dump - bad address)
pid 32473 (conftest), jid 330, uid 65534: exited on signal 11 (no core dump - bad address)
pid 70149 (mate-settings-daemo), jid 0, uid 1000: exited on signal 10 (no core dump - bad address)
pid 22787 (conftest), jid 386, uid 65534: exited on signal 11 (no core dump - bad address)
pid 21628 (conftest), jid 327, uid 65534: exited on signal 11 (no core dump - bad address)
pid 14852 (conftest), jid 327, uid 65534: exited on signal 11 (no core dump - bad address)
pid 87129 (conftest), jid 324, uid 65534: exited on signal 11 (no core dump - bad address)
pid 98601 (conftest), jid 324, uid 65534: exited on signal 11 (no core dump - bad address)
pid 5426 (conftest), jid 442, uid 65534: exited on signal 11 (no core dump - bad address)
pid 20761 (conftest), jid 442, uid 65534: exited on signal 11 (no core dump - bad address)
pid 62689 (conftest), jid 456, uid 65534: exited on signal 11 (no core dump - bad address)
pid 84279 (conftest), jid 452, uid 65534: exited on signal 11 (no core dump - bad address)
pid 3426 (conftest), jid 452, uid 65534: exited on signal 11 (no core dump - bad address)
pid 59003 (conftest), jid 452, uid 65534: exited on signal 11 (no core dump - bad address)
pid 63816 (conftest), jid 452, uid 65534: exited on signal 11 (no core dump - bad address)
pid 10211 (conftest), jid 452, uid 65534: exited on signal 11 (no core dump - bad address)
pid 42650 (conftest), jid 454, uid 65534: exited on signal 11 (no core dump - bad address)
tap0: link state changed to DOWN
igb1: link state changed to DOWN
igb1: link state changed to UP
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: promiscuous mode enabled
igb1: link state changed to DOWN
vm-public: link state changed to DOWN
tap0: link state changed to UP
vm-public: link state changed to UP
igb1: link state changed to UP
pid 68992 (conftest), jid 0, uid 0: exited on signal 11 (no core dump - bad address)
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-STABLE #23 stable/14-n266882-1e74fc950419: Sun Feb 25 16:40:41 CST 2024
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
VT(efifb): resolution 1024x768
CPU: AMD Ryzen 9 5900X 12-Core Processor (3700.15-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0xa20f12 Family=0x19 Model=0x21 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID>
Structured Extended Features3=0x10<FSRM>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
AMD Extended Feature Extensions ID EBX=0x111ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66759852032 (63667 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 1 package(s) x 2 cache groups x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 23 22 14 19 18 15 12 16 21 13 17 20 1 3 5 6 9 10 11 8 2 7 4
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xbdc05000-0xbdc0501e
smbios0: Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <AMD 300 Series USB 3.1 controller> mem 0xfcea0000-0xfcea7fff at device 0.0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD 300 Series AHCI SATA controller> mem 0xfce80000-0xfce9ffff at device 0.1 on pci2
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci3
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0x7c00000000-0x7dffffffff,0x7e00000000-0x7e001fffff,0xfcd00000-0xfcd3ffff at device 0.0 on pci6
hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfcd60000-0xfcd63fff at device 0.1 on pci6
pcib7: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci7: <ACPI PCI bus> on pcib7
igb0: <Intel(R) I350 (Copper)> mem 0xfc700000-0xfc7fffff,0xfc904000-0xfc907fff at device 0.0 on pci7
igb0: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd0
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 8 RX queues 8 TX queues
igb0: Using MSI-X interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) I350 (Copper)> mem 0xfc600000-0xfc6fffff,0xfc900000-0xfc903fff at device 0.1 on pci7
igb1: EEPROM V1.67-0 Option ROM V17-b5-p10 eTrack 0x80000dd0
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 8 RX queues 8 TX queues
igb1: Using MSI-X interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci9: <ACPI PCI bus> on pcib9
pci9: <encrypt/decrypt> at device 0.1 (no driver attached)
xhci1: <AMD Matisse USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci9
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD X570 HDA Controller> mem 0xfcc00000-0xfcc07fff at device 0.4 on pci9
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1849991556 Hz quality 1000
Timecounters tick every 1.000 msec
ugen1.1: <AMD XHCI root HUB> at usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0
pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0
pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm6: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm7: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
nda0 at nvme0 bus 0 scbus4 target 0 lun 1
nda0: <Micron_2210_MTFDHBA512QFD P6MA001 21202F4BDBF9>
nda0: [_SERIAL_NUMBER_XXXXXXXXX]
nda0: nvme version 1.3
nda0: 488386MB (1000215216 512 byte sectors)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors)
ada2 at ahcich4 bus 0 scbus2 target 0 lun 0
ada2: <Hitachi HDS721010CLA332 JP4OA3MA> ATA8-ACS SATA 2.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors)
ada3 at ahcich5 bus 0 scbus3 target 0 lun 0
ada3: <Hitachi HDS721010CLA332 JP4OA39C> ATA8-ACS SATA 2.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953868MB (1953523055 512 byte sectors)
Trying to mount root from zfs:mars/ROOT/default []...
uhub0: 8 ports with 8 removable, self powered
uhub1: 22 ports with 22 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.90, addr 1> on usbus0
uhub2: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <Logitech USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus0
kbd2 at ukbd0
ugen0.4: <Logitech USB Receiver> at usbus0
Root mount waiting for: usbus0
ugen0.5: <American Power Conversion Back-UPS ES 750 FW:841.I3 .D USB FW:I3> at usbus0
Root mount waiting for: usbus0
amdsmn0: <AMD Family 19h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
amdiommu0 at device 0.2 on pci0
AMD-Vi: IVRS Info VAsize = 64 PAsize = 48 GVAsize = 2 flags:0
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ivhd0: <AMD-Vi/IOMMU ivhd in mixed format> on acpi0
ivhd0: Unknown dev entry:0xf0
Variable size IVHD type 0xf0 not supported
ivhd0: Flag:b0<IotlbSup,Coherent>
ivhd0: Features(type:0x40) MsiNumPPR = 0 PNBanks= 2 PNCounters= 0
ivhd0: Extended features[31:0]:22294a5a<PPRSup,NXSup,GTSup,IASup,PCSup> HATS = 0x2 GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup = 0x2 DualEventLogSup = 0x2
ivhd0: Extended features[62:32]:58f77ef<USSup,PprOvrflwEarlySup,PPRAutoRspSup,BlKStopMrkSup,PerfOptSup,MsiCapMmioSup,GIOSup,HASup,EPHSup,AttrFWSup> Max PASID: 0x2f DevTblSegSup = 0x3 MarcSup = 0x1
ivhd0: supported paging level:7, will use only: 4
ivhd0: device [0x8 - 0xfffe] config:0
ivhd0: device [0xff00 - 0xffff] config:0
ivhd0: PCI cap 0x190b640f@0x40 feature:19<IOTLB,EFR,CapExt>
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0xC580 0xE7).
drmn0: Trusted Memory Zone (TMZ) feature not supported
[drm] register mmio base: 0xFCD00000
[drm] register mmio size: 262144
[drm] add ip block number 0 <vi_common>
[drm] add ip block number 1 <gmc_v8_0>
[drm] add ip block number 2 <tonga_ih>
[drm] add ip block number 3 <gfx_v8_0>
[drm] add ip block number 4 <sdma_v3_0>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v6_0>
[drm] add ip block number 8 <vce_v3_0>
drmn0: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-58085SHB1-W91
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 256 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mc.bin'
drmn0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=8192M
[drm] RAM width 256bits GDDR5
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
drmn0: successfully loaded firmware image 'amdgpu/polaris10_pfp_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_me_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_ce_2.bin'
[drm] Chained IB support enabled!
drmn0: successfully loaded firmware image 'amdgpu/polaris10_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_mec2_2.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma.bin'
drmn0: successfully loaded firmware image 'amdgpu/polaris10_sdma1.bin'
amdgpu: hwmgr_sw_init smu backed is polaris10_smu
drmn0: successfully loaded firmware image 'amdgpu/polaris10_uvd.bin'
[drm] Found UVD firmware Version: 1.130 Family ID: 16
drmn0: successfully loaded firmware image 'amdgpu/polaris10_vce.bin'
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
drmn0: successfully loaded firmware image 'amdgpu/polaris10_k_smc.bin'
[drm] Display Core initialized with v3.2.149!
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
[drm] UVD and UVD ENC initialized successfully.
[drm] VCE initialized successfully.
drmn0: SE 4, SH per SE 1, CU per SH 9, active_cu_number 36
[drm] fb mappable at 0x7C00830000
[drm] vram apper at 0x7C00000000
[drm] size 5242880
[drm] fb depth is 24
[drm] pitch is 5120
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1024 width=1280 depth=32
pbase=0x7c00830000 vbase=0xfffffe01fee30000
name=drmn0 flags=0x0 stride=5120 bpp=32
end FB_INFO
vgapci0: child drmn0 requested pci_get_powerstate
drmn0: Using BACO for runtime pm
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic5: <LinuxKPI I2C> on drm1
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drm2
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drm3
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
[drm] Initialized amdgpu 3.42.0 20150101 for drmn0 on minor 0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134AOD.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: cannot find EC device
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: cannot find EC device
acpi_wmi2: Embedded MOF found
ACPI: \134_SB.WMIC.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
igb0: link state changed to UP
igb1: link state changed to UP
lo0: link state changed to UP
igb0: link state changed to DOWN
uhid0 on uhub2
uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 3> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid1 on uhub2
uhid1: <Logitech USB Receiver, class 0/0, rev 2.00/30.00, addr 3> on usbus0
igb0: link state changed to UP