Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-03-23 13:04:47
From: jakllsch
Description: NetBSD/amd64-current Supremicro X9SCL
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.99.10 (GENERIC) #8: Sat Mar 23 07:42:47 CDT 2024 [ 1.0000000] jakllsch@terminus:/local/jakllsch/bcache0/NetBSD/obj/amd64/sys/arch/amd64/compile/GENERIC [ 1.0000000] total memory = 996 MB [ 1.0000000] avail memory = 936 MB [ 1.0000000] timecounter: Timecounters tick every 10.000 msec [ 1.0000000] Kernelized RAIDframe activated [ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.0000040] mainbus0 (root) [ 1.0000040] ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM) [ 1.0000040] ACPI: XSDT 0x000000003E65D080 000084 (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 1.0000040] ACPI: FACP 0x000000003E668208 00010C (v05 SUPERM SMCI--MB 00000001 AMI 00010013) [ 1.0000040] ACPI: DSDT 0x000000003E65D1A0 00B068 (v02 SUPERM SMCI--MB 00000000 INTL 20051117) [ 1.0000040] ACPI: FACS 0x000000003E698080 000040 [ 1.0000040] ACPI: APIC 0x000000003E668318 000072 (v03 SUPERM SMCI--MB 00000001 AMI 00010013) [ 1.0000040] ACPI: FPDT 0x000000003E668390 000044 (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 1.0000040] ACPI: MCFG 0x000000003E6683D8 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 1.0000040] ACPI: HPET 0x000000003E668418 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 1.0000040] ACPI: SSDT 0x000000003E668450 000397 (v01 SataRe SataTabl 00001000 INTL 20091112) [ 1.0000040] ACPI: SSDT 0x000000003E6687E8 0009A4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 1.0000040] ACPI: SSDT 0x000000003E669190 000B18 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 1.0000040] ACPI: EINJ 0x000000003E669CA8 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 1.0000040] ACPI: ERST 0x000000003E669DD8 000210 (v01 AMIER AMI ERST 00000000 00000000) [ 1.0000040] ACPI: HEST 0x000000003E669FE8 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 1.0000040] ACPI: BERT 0x000000003E66A090 000030 (v01 AMI AMI BERT 00000000 00000000) [ 1.0000040] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 1.0000040] ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins [ 1.0000040] cpu0 at mainbus0 apid 0 [ 1.0000040] cpu0: Use lfence to serialize rdtsc [ 1.0000040] cpu0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz, id 0x206a7 [ 1.0000040] cpu0: node 0, package 0, core 0, smt 0 [ 1.0000040] cpu1 at mainbus0 apid 2 [ 1.0000040] cpu1: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz, id 0x206a7 [ 1.0000040] cpu1: node 0, package 0, core 1, smt 0 [ 1.0000040] cpu2 at mainbus0 apid 1 [ 1.0000040] cpu2: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz, id 0x206a7 [ 1.0000040] cpu2: node 0, package 0, core 0, smt 1 [ 1.0000040] cpu3 at mainbus0 apid 3 [ 1.0000040] cpu3: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz, id 0x206a7 [ 1.0000040] cpu3: node 0, package 0, core 1, smt 1 [ 1.0000040] acpi0 at mainbus0: Intel ACPICA 20230628 [ 1.0000040] acpi0: X/RSDT: OemId <SUPERM,SMCI--MB,00000001>, AslId <AMI ,00010013> [ 1.0000040] acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000 [ 1.0000040] ACPI: Dynamic OEM Table Load: [ 1.0000040] ACPI: SSDT 0xFFFF8C367F871008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 1.0000040] ACPI: Dynamic OEM Table Load: [ 1.0000040] ACPI: SSDT 0xFFFF8C367F7CC008 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 1.0000040] ACPI: Dynamic OEM Table Load: [ 1.0000040] ACPI: SSDT 0xFFFF8C367F7AC748 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 1.0000040] acpi0: SCI interrupting at int 9 [ 1.0000040] acpi0: fixed power button present [ 1.0000040] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.0300405] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.0300405] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [ 1.0375233] acpiec0 at acpi0 (H_EC, PNP0C09-1): not present [ 1.0375233] TPMX (PNP0C01) at acpi0 not configured [ 1.0375233] FWHD (INT0800) at acpi0 not configured [ 1.0375233] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0 [ 1.0375233] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0375233] pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 [ 1.0375233] com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4 [ 1.0375233] com0: ns16550a, 16-byte FIFO [ 1.0375233] com0: console [ 1.0375233] com1 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3 [ 1.0375233] com1: ns16550a, 16-byte FIFO [ 1.0375233] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button [ 1.0375233] acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan [ 1.0375233] acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan [ 1.0375233] acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan [ 1.0375233] acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan [ 1.0375233] acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan [ 1.0375233] acpitz0 at acpi0 (TZ00) [ 1.0375233] acpitz0: active cooling level 0: 82.0C [ 1.0375233] acpitz0: active cooling level 1: 55.0C [ 1.0375233] acpitz0: active cooling level 2: 0.0C [ 1.0375233] acpitz0: active cooling level 3: 0.0C [ 1.0375233] acpitz0: active cooling level 4: 0.0C [ 1.0375233] acpitz0: levels: critical 103.0 C [ 1.0375233] acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 [ 1.0375233] acpitz1: levels: critical 103.0 C, passive 103.0 C, passive cooling [ 1.0375233] apei0 at acpi0: ACPI Platform Error Interface [ 1.0375233] apei0: BERT: OemId < AMI,AMI BERT,00000000> AslId < ,00000000> [ 1.0375233] apei0: BERT: 0x14 bytes at 0x3e699e18 [ 1.0375233] apei0: BERT: no boot errors recorded [ 1.0375233] apei0: EINJ: OemId < AMI,AMI EINJ,00000000> AslId < ,00000000> [ 1.0375233] apei0: EINJ: can inject: 0x28<MEM_CORRECTABLE,MEM_FATAL> [ 1.0375233] apei0: ERST: OemId < AMIER,AMI ERST,00000000> AslId < ,00000000> [ 1.0375233] apei0: ERST: 0 records in error log 8192 bytes @ 0x3e4c3050 attr=0# [ 1.0375233] apei0: HEST: OemId < AMI,AMI HEST,00000000> AslId < ,00000000> [ 1.0375233] apei0: HEST: 2 hardware error sources [ 1.0375233] ACPI: Enabled 4 GPEs in block 00 to 3F [ 1.0375233] pckbd0 at pckbc1 (kbd slot) [ 1.0375233] pckbc1: using irq 1 for kbd slot [ 1.0375233] wskbd0 at pckbd0 mux 1 [ 1.0375233] pms0 at pckbc1 (aux slot) [ 1.0375233] pckbc1: using irq 12 for aux slot [ 1.0375233] wsmouse0 at pms0 mux 0 [ 1.0375233] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0375233] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.0375233] pchb0 at pci0 dev 0 function 0: Intel Sandy Bridge (desktop) Host Bridge (rev. 0x09) [ 1.0375233] wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH2 LAN (82579LM) Controller (rev. 0x05) [ 1.0375233] wm0: interrupting at msi0 vec 0 [ 1.0375233] wm0: PCI-Express bus [ 1.0375233] wm0: 2048 words FLASH, version 0.13.4 [ 1.0375233] wm0: RX packet buffer size: 26KB [ 1.0375233] wm0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0375233] wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE> [ 1.0375233] ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3 [ 1.0375233] ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0375233] ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x05) [ 1.0375233] ehci0: 64-bit DMA [ 1.0375233] ehci0: interrupting at ioapic0 pin 16 [ 1.0375233] ehci0: EHCI version 1.0 [ 1.0375233] ehci0: Using DMA subregion for control data structures [ 1.0375233] usb0 at ehci0: USB revision 2.0 [ 1.0375233] ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb5) [ 1.0375233] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s [ 1.0375233] pci1 at ppb0 bus 1 [ 1.0375233] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0375233] ppb1 at pci0 dev 28 function 4: Intel 6 Series Chipset Family PCIe Root Port 5 (rev. 0xb5) [ 1.0375233] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0375233] ppb1: link is x1 @ 2.5GT/s [ 1.0375233] pci2 at ppb1 bus 2 [ 1.0375233] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0375233] wm1 at pci2 dev 0 function 0, 64-bit DMA: Intel i82574L (rev. 0x00) [ 1.0375233] wm1: for TX and RX interrupting at msix1 vec 0 affinity to 1 [ 1.0375233] wm1: for TX and RX interrupting at msix1 vec 1 affinity to 2 [ 1.0375233] wm1: for LINK interrupting at msix1 vec 2 [ 1.0375233] wm1: PCI-Express bus [ 1.0375233] wm1: 2048 words (8 address bits) SPI EEPROM, version 2.1.2, Image Unique ID ffffffff [ 1.0375233] wm1: ASPM L0s and L1 are disabled to workaround the errata. [ 1.0375233] wm1: RX packet buffer size: 20KB [ 1.0375233] wm1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0375233] wm1: 0x224040<SPI,PCIE,ASF_FIRM,WOL> [ 1.0375233] makphy0 at wm1 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1 [ 1.0375233] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0375233] ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x05) [ 1.0375233] ehci1: 64-bit DMA [ 1.0375233] ehci1: interrupting at ioapic0 pin 23 [ 1.0375233] ehci1: EHCI version 1.0 [ 1.0375233] ehci1: Using DMA subregion for control data structures [ 1.0375233] usb1 at ehci1: USB revision 2.0 [ 1.0375233] ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xa5) [ 1.0375233] pci3 at ppb2 bus 3 [ 1.0375233] pci3: i/o space, memory space enabled [ 1.0375233] vga0 at pci3 dev 3 function 0: Matrox MGA G200eW (rev. 0x0a) [ 1.0375233] wsdisplay0 at vga0 kbdmux 1 [ 1.0375233] wsmux1: connecting to wsdisplay0 [ 1.0375233] wskbd0: connecting to wsdisplay0 [ 1.0375233] drm at vga0 not configured [ 1.0375233] ichlpcib0 at pci0 dev 31 function 0: Intel C202 LPC (rev. 0x05) [ 1.0375233] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [ 1.0375233] ichlpcib0: 24-bit timer [ 1.0375233] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.0375233] tco0: Min/Max interval 1/367 seconds [ 1.0375233] ahcisata0 at pci0 dev 31 function 2: Intel 6 Series Chipset Family AHCI 1 (rev. 0x05) [ 1.0375233] ahcisata0: 64-bit DMA [ 1.0375233] ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc720ff45<EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A> [ 1.0375233] ahcisata0: interrupting at msi2 vec 0 [ 1.0375233] atabus0 at ahcisata0 channel 0 [ 1.0375233] atabus1 at ahcisata0 channel 1 [ 1.0375233] atabus2 at ahcisata0 channel 2 [ 1.0375233] atabus3 at ahcisata0 channel 3 [ 1.0375233] atabus4 at ahcisata0 channel 4 [ 1.0375233] atabus5 at ahcisata0 channel 5 [ 1.0375233] ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x05) [ 1.0375233] ichsmb0: interrupting at ioapic0 pin 18 [ 1.0375233] iic0 at ichsmb0: I2C bus [ 1.0375233] isa0 at ichlpcib0 [ 1.0375233] pcppi0 at isa0 port 0x61 [ 1.0375233] spkr0 at pcppi0: PC Speaker [ 1.0375233] wsbell at spkr0 not configured [ 1.0375233] midi0 at pcppi0: PC speaker [ 1.0375233] sysbeep0 at pcppi0 [ 1.0375233] attimer1: attached to pcppi0 [ 1.0375233] acpicpu0 at cpu0: ACPI CPU [ 1.0375233] acpicpu0: C1: FFH, lat 1 us, pow 1000 mW [ 1.0375233] acpicpu0: C3: FFH, lat 104 us, pow 350 mW [ 1.0375233] acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 3300 MHz [ 1.0375233] acpicpu0: P1: FFH, lat 10 us, pow 61690 mW, 3200 MHz [ 1.0375233] acpicpu0: P2: FFH, lat 10 us, pow 59079 mW, 3100 MHz [ 1.0375233] acpicpu0: P3: FFH, lat 10 us, pow 56516 mW, 3000 MHz [ 1.0375233] acpicpu0: P4: FFH, lat 10 us, pow 51532 mW, 2800 MHz [ 1.0375233] acpicpu0: P5: FFH, lat 10 us, pow 49120 mW, 2700 MHz [ 1.0375233] acpicpu0: P6: FFH, lat 10 us, pow 46744 mW, 2600 MHz [ 1.0375233] acpicpu0: P7: FFH, lat 10 us, pow 44414 mW, 2500 MHz [ 1.0375233] acpicpu0: P8: FFH, lat 10 us, pow 42130 mW, 2400 MHz [ 1.0375233] acpicpu0: P9: FFH, lat 10 us, pow 39891 mW, 2300 MHz [ 1.0375233] acpicpu0: P10: FFH, lat 10 us, pow 37705 mW, 2200 MHz [ 1.0375233] acpicpu0: P11: FFH, lat 10 us, pow 35554 mW, 2100 MHz [ 1.0375233] acpicpu0: P12: FFH, lat 10 us, pow 31386 mW, 1900 MHz [ 1.0375233] acpicpu0: P13: FFH, lat 10 us, pow 29367 mW, 1800 MHz [ 1.0375233] acpicpu0: P14: FFH, lat 10 us, pow 27391 mW, 1700 MHz [ 1.0375233] acpicpu0: P15: FFH, lat 10 us, pow 25463 mW, 1600 MHz [ 1.0375233] coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=102 [ 1.0375233] acpicpu1 at cpu1: ACPI CPU [ 1.0375233] coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=102 [ 1.0375233] acpicpu2 at cpu2: ACPI CPU [ 1.0375233] acpicpu3 at cpu3: ACPI CPU [ 1.0375233] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.0375233] timecounter: Timecounter "TSC" frequency 3300025000 Hz quality 3000 [ 1.6530186] IPsec: Initialized Security Association Processing. [ 1.6705032] uhub0 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.6705032] uhub0: 2 ports with 2 removable, self powered [ 1.6705032] uhub1 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.6805024] uhub1: 2 ports with 2 removable, self powered [ 1.7505032] ahcisata0 port 1: device present, speed: 3.0Gb/s [ 2.7505056] uhub2 at uhub0 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2 [ 2.7605052] uhub2: single transaction translator [ 2.7605052] uhub3 at uhub1 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2 [ 2.7705051] uhub3: single transaction translator [ 2.7805057] uhub2: 6 ports with 6 removable, self powered [ 2.7805057] uhub3: 6 ports with 6 removable, self powered [ 3.3105070] wd0 at atabus1 drive 0 [ 3.3105070] wd0: <WDC WD1600YS-01SHB1> [ 3.3105070] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 3.3105070] wd0: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors [ 3.3705071] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 3.3705071] wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 3.3705071] swwdog0: software watchdog initialized [ 3.3838579] boot device: wd0 [ 3.3838579] root on wd0a dumps on wd0b [ 3.4105072] root file system type: ffs [ 3.4305074] kern.module.path=/stand/amd64/10.99.10/modules [ 4.1705098] entropy: best effort [ 11.1805265] wsdisplay0: screen 0 added (80x25, vt100 emulation) [ 11.1805265] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 11.1805265] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 11.1805265] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 11.1805265] wsdisplay0: screen 4 added (80x25, vt100 emulation)