Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-03-24 09:43:55
From: Aaron Riekenberg
Description: NetBSD 10.0_RC6 Raspberry Pi 3B aarch64
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0_RC6 (GENERIC64) #0: Tue Mar 12 10:19:02 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64 [ 1.000000] total memory = 930 MB [ 1.000000] avail memory = 895 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Raspberry Pi 3 Model B Rev 1.2 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] simplebus3 at simplebus0 [ 1.000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0 [ 1.000000] cpu0: package 0, core 0, smt 0 [ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu0: L2 512KB/64B 16-way (512 set) PIPT Unified cache [ 1.000000] cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1 [ 1.000000] cpu1: package 0, core 1, smt 0 [ 1.000000] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu1: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu1: L2 512KB/64B 16-way (512 set) PIPT Unified cache [ 1.000000] cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2 [ 1.000000] cpu2: package 0, core 2, smt 0 [ 1.000000] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu2: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu2: L2 512KB/64B 16-way (512 set) PIPT Unified cache [ 1.000000] cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3 [ 1.000000] cpu3: package 0, core 3, smt 0 [ 1.000000] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu3: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu3: L2 512KB/64B 16-way (512 set) PIPT Unified cache [ 1.000000] cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] bcmicu0 at simplebus1 [ 1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc) [ 1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller [ 1.000000] syscon0 at simplebus1autoconfiguration error: : couldn't get registers [ 1.000000] bcmaux0 at simplebus1 [ 1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg) [ 1.000000] bcmicu1 at simplebus1: Multiprocessor [ 1.000000] gtmr0 at simplebus0: Generic Timer [ 1.000000] gtmr0: interrupting on local_intc irq 3 [ 1.000000] armgtmr0 at gtmr0: Generic Timer (19200 kHz, virtual) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500 [ 1.000004] bcmgpio0 at simplebus1: GPIO controller 2835 [ 1.000004] bcmgpio0: pins 0..31 interrupting on icu irq 49 [ 1.000004] bcmgpio0: pins 32..54 interrupting on icu irq 50 [ 1.000004] gpio0 at bcmgpio0: 54 pins [ 1.000004] plcom0 at simplebus1: ARM PL011 UART [ 1.000004] plcom0: txfifo disabled [ 1.000004] plcom0: interrupting on icu irq 57 [ 1.000004] com0 at simplebus1: BCM AUX UART, 1-byte FIFO [ 1.000004] com0: console [ 1.000004] com0: interrupting on icu irq 29 [ 1.000004] mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs [ 1.000004] /soc/thermal@7e212000 at simplebus1 not configured [ 1.000004] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11 [ 1.000004] /soc/power at simplebus1 not configured [ 1.000004] /phy at simplebus0 not configured [ 1.000004] bsciic0 at simplebus1: Broadcom Serial Controller [ 1.000004] bsciic0: interrupting on icu irq 53 [ 1.000004] iic0 at bsciic0: I2C bus [ 1.000004] bcmmbox0 at simplebus1: VC mailbox [ 1.000004] bcmmbox0: interrupting on icu irq 65 [ 1.000004] vcmbox0 at bcmmbox0 [ 1.000004] /soc/timer@7e003000 at simplebus1 not configured [ 1.000004] /soc/txp@7e004000 at simplebus1 not configured [ 1.000004] bcmsdhost0 at simplebus1: SD HOST controller [ 1.000004] bcmsdhost0: interrupting on icu irq 56 [ 1.000004] bsciic1 at simplebus1: Broadcom Serial Controller [ 1.000004] bsciic1: interrupting on icu irq 53 [ 1.000004] iic1 at bsciic1: I2C bus [ 1.000004] /soc/pwm@7e20c000 at simplebus1 not configured [ 1.000004] sdhc0 at simplebus1: SDHC controller [ 1.000004] sdhc0: interrupting on icu irq 62 [ 1.000004] bsciic2 at simplebus1: Broadcom Serial Controller [ 1.000004] bsciic2: interrupting on icu irq 53 [ 1.000004] iic2 at bsciic2: I2C bus [ 1.000004] dwctwo0 at simplebus1: USB controller [ 1.000004] dwctwo0: interrupting on icu irq 9 [ 1.000004] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller [ 1.000004] /soc/vec@7e806000 at simplebus1 not configured [ 1.000004] /soc/hdmi@7e902000 at simplebus1 not configured [ 1.000004] /soc/gpu at simplebus1 not configured [ 1.000004] genfb0 at simplebus1: switching to framebuffer console [ 1.000004] genfb0: framebuffer at 0xfe402000, size 1920x1080, depth 32, stride 7680 [ 1.000004] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [ 1.000004] wsmux1: connecting to wsdisplay0 [ 1.000004] wsdisplay0: screen 1-3 added (default, vt100 emulation) [ 1.000004] vchiq0 at simplebus1: BCM2835 VCHIQ [ 1.000004] armpmu0 at simplebus0: Performance Monitor Unit [ 1.000004] gpioleds0 at simplebus0: [ 1.000004] bcmrng0 at simplebus1: RNG [ 1.000004] entropy: ready [ 1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.352637] sdmmc0 at bcmsdhost0 [ 1.362639] sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks [ 1.372639] sdmmc1 at sdhc0 slot 0 [ 1.382641] dwctwo0: Core Release: 2.80a (snpsid=4f54280a) [ 1.382641] usb0 at dwctwo0: USB revision 2.0 [ 1.402645] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.412642] uhub0: 1 port with 1 removable, self powered [ 1.412642] armpmu0: interrupting on local_intc irq 9 [ 1.442650] IPsec: Initialized Security Association Processing. [ 1.482650] sdmmc0: direct I/O error 5, r=6 p=0xffffc000aae2be4c write [ 1.542655] sdmmc0: SD card status: 4-bit, C10, U1, V10, A1 [ 1.542655] ld0 at sdmmc0: <0x03:0x5344:SK32G:0x85:0x3e08946d:0x15a> [ 1.552658] ld0: 30436 MB, 7729 cyl, 128 head, 63 sec, 512 bytes/sect x 62333952 sectors [ 1.572659] ld0: GPT GUID: c820fc91-2287-40f4-abb7-dd876b3b7108 [ 1.572659] dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos [ 1.572659] dk1 at ld0: "netbsd-root", 62136320 blocks at 196608, type: ffs [ 1.586283] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.652664] sdmmc1: 4-bit width, 50.000 MHz [ 1.662666] bwfm0 at sdmmc1 function 1 [ 1.672666] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured [ 2.062695] uhub1 at uhub0 port 1: vendor 0424 (0x0424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2 [ 2.072695] uhub1: multiple transaction translators [ 2.082695] uhub1: 5 ports with 4 removable, self powered [ 2.932754] usmsc0 at uhub1 port 1 [ 2.942754] usmsc0: vendor 0424 (0x0424) product ec00 (0xec00), rev 2.00/2.00, addr 3 [ 2.952756] smscphy0 at usmsc0 phy 1: SMSC LAN8700 10/100 Ethernet Transceiver, rev. 3 [ 2.962756] smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 2.972758] usmsc0: Ethernet address [_MAC_XXXXXXXXXX] [ 3.512795] uhidev0 at uhub1 port 2 configuration 1 interface 0 [ 3.512795] uhidev0: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 4, iclass 3/1 [ 3.532797] ukbd0 at uhidev0 [ 3.532797] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [ 3.542798] uhidev1 at uhub1 port 2 configuration 1 interface 1 [ 3.542798] uhidev1: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 4, iclass 3/1 [ 3.582800] uhidev1: 8 report ids [ 3.582800] ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs [ 3.582800] wsmouse0 at ums0 mux 0 [ 3.592802] uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 [ 3.592802] uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 [ 3.602802] uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 [ 3.612803] uhidev2 at uhub1 port 2 configuration 1 interface 2 [ 3.612803] uhidev2: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 4, iclass 3/0 [ 3.642806] uhidev2: 33 report ids [ 3.642806] uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 [ 3.652807] uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 [ 3.652807] uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 [ 3.662806] uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 [ 3.672808] uhub0: autoconfiguration error: illegal enable change, port 1 [ 3.682811] swwdog0: software watchdog initialized [ 3.692811] WARNING: 3 errors while detecting hardware; check system log. [ 3.692811] boot device: ld0 [ 3.702811] root on dk1 [ 3.712812] root file system type: ffs [ 3.722812] kern.module.path=/stand/evbarm/10.0/modules [ 3.722812] WARNING: no TOD clock present [ 3.722812] vchiq0: interrupting on icu irq 66 [ 3.722812] WARNING: using filesystem time [ 3.740801] WARNING: CHECK AND RESET THE DATE! [ 3.742815] vchiq: vchiq_init_state: slot_zero = 0xffffc000ab340000, is_master = 0 [ 3.742815] vchiq: local ver 8 (min 3), remote ver 8. [ 3.742815] vcaudio0 at vchiq0: auds [ 3.742815] bwfm0: Firmware file default: brcmfmac43430-sdio.bin [ 3.742815] bwfm0: Firmware file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.bin [ 3.752829] audio0 at vcaudio0: playback [ 3.752829] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback [ 3.767129] spkr0 at audio0: PC Speaker (synthesized) [ 3.767129] wsbell at spkr0 not configured [ 3.794876] bwfm0: Found Firmware file: brcmfmac43430-sdio.bin [ 3.814877] bwfm0: NVRAM file default: brcmfmac43430-sdio.txt [ 3.814877] bwfm0: NVRAM file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.txt [ 3.814877] bwfm0: Found NVRAM file: brcmfmac43430-sdio.raspberrypi,3-model-b.txt [ 3.814877] bwfm0: CLM file default: brcmfmac43430-sdio.clm_blob [ 3.814877] bwfm0: CLM file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.clm_blob [ 5.334990] bwfm0: CHIPACTIVE [ 5.434997] bwfm0: address [_MAC_XXXXXXXXXX] [ 5.448057] bwfm0: wl0: Oct 23 2017 03:55:53 version[_IP_XXXXX] (r674442 CY) FWID 01-e58d219f [ 7.887047] wsdisplay0: screen 4 added (default, vt100 emulation)