Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-04-07 15:29:36
From: Ken Wellsch
Description: NetBSD/vax 10.0 on VAX 4000/105A
>>>boot dka0
(BOOT/R5:0 DKA0)

  2..
-DKA0
  1..0..

>> NetBSD/vax boot [1.12 (Thu Mar 28 08:33:33 UTC 2024)] <<
>> Press any key to abort autoboot 4
nfs_open: must mount first.
open netbsd.vax: Device not configured
> boot netbsd
3557784+185792 [249520+235927]=0x408bb0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
[   1.0000000]  [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/vax/compile/GENERIC
[   1.0000000] VAX 4000/{105A,106A,108}
[   1.0000000] total memory = 127 MB
[   1.0000000] avail memory = 119 MB
[   1.0000000] mainbus0 (root)
[   1.0000000] cpu0 at mainbus0cpu0: KA53,54,57, ucode rev 2
[   1.0000000] ze0 at mainbus0
[   1.0000000] ze0: hardware address [_MAC_XXXXXXXXXX]
[   1.0000000] vsbus0 at mainbus0
[   1.0000000] vsbus0: 8K entry DMA SGMAP at PA 0x27000000 (VA 0x8afe2000)
[   1.0000000] vsbus0: interrupt mask 0
[   1.0000000] dz0 at vsbus0 csr 0x25000000 vec 524 ipl 17 maskbit 3
[   1.0000000] dz0: 4 lines
[   1.0000000] lkkbd0 at dz0
[   1.0000000] lkkbd0: no keyboard
[   1.0000000] wskbd0 at lkkbd0 mux 1
[   1.0000000] lkms0 at dz0
[   1.0000000] wsmouse0 at lkms0 mux 0
[   1.0000000] asc0 at vsbus0 csr 0x26000080 vec 510 ipl 17 maskbit 1
[   1.0000000] asc0: NCR53C94, 25MHz, SCSI ID 6
[   1.0000000] scsibus0 at asc0: 8 targets, 8 luns per target
[   1.0000000] uba0 at mainbus0: Q22
[   1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[   1.0194700] WARNING: system needs entropy for security; see entropy(7)
[   3.0094710] sd0 at scsibus0 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.0311750] sd0: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.0599670] sd0: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers
[   3.0794480] sd1 at scsibus0 target 1 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.1002000] sd1: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.1294680] sd1: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers
[   3.1398070] sd2 at scsibus0 target 2 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.1602790] sd2: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.1894570] sd2: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers
[   3.2002260] sd3 at scsibus0 target 3 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed
[   3.2206770] sd3: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors
[   3.2494600] sd3: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers
[   3.2602410] cd0 at scsibus0 target 4 lun 0: <DEC, RRD46   (C) DEC, 1337> cdrom removable
[   3.2822080] cd0: sync (160.00ns offset 8), 8-bit (6.250MB/s) transfers
[   8.2994120] cd1 at scsibus0 target 5 lun 0: <ZULUSCSI, CDROM, 2.0> cdrom removable
[   8.3209290] cd1: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers
[   8.8094130] swwdog0: software watchdog initialized
[   8.8394140] entropy: best effort
[   8.8894140] boot device: sd0
[   8.9094270] root on sd0a dumps on sd0b
[   8.9596720] root file system type: ffs
[   8.9794140] kern.module.path=/stand/vax/10.0/modules
Sun Apr  7 11:21:13 EDT 2024
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
[  16.6894340] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: vax
IPv6 mode: host
Configuring network interfaces: ze0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Creating a.out runtime link editor directory cache.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting inetd.
Starting cron.
Sun Apr  7 11:28:22 EDT 2024

NetBSD/vax (vax) (constty)

login: