Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-04-11 04:38:00
From: lordnikon
Description: NetBSD/i386 10.0 on ALIX.2D
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 255 MB
avail memory = 227 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
Firmware Error (ACPI): A valid RSDP was not found (20221020/tbxfroot-275)
autoconfiguration error: acpi_probe: failed to initialize tables
ACPI Error: Could not remove SCI handler (20221020/evmisc-316)
cpu0 at mainbus0
ACPI Error: AE_BAD_PARAMETER, Thread 3242924096 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326)
ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20221020/utmutex-367)
cpu0: Use cpuid to serialize rdtsc
cpu0: Geode(TM) Integrated Processor by AMD PCS, id 0x5a2
cpu0: node 0, package 0, core 0, smt 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0: AMD Geode LX Host-PCI Bridge (rev. 0x33)
glxsb0 at pci0 dev 1 function 2: RNG AES
vr0 at pci0 dev 9 function 0: VIA Technologies VT6105M (Rhine III) 10/100 Ethernet (rev. 0x96)
vr0: interrupting at irq 10
vr0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0034, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1 at pci0 dev 10 function 0: VIA Technologies VT6105M (Rhine III) 10/100 Ethernet (rev. 0x96)
vr1: interrupting at irq 11
vr1: Ethernet address [_MAC_XXXXXXXXXX]
ukphy1 at vr1 phy 1: OUI 0x0002c6, model 0x0034, rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2 at pci0 dev 11 function 0: VIA Technologies VT6105M (Rhine III) 10/100 Ethernet (rev. 0x96)
vr2: interrupting at irq 15
vr2: Ethernet address [_MAC_XXXXXXXXXX]
ukphy2 at vr2 phy 1: OUI 0x0002c6, model 0x0034, rev. 3
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gcscpcib0 at pci0 dev 15 function 0: AMD CS5536 PCI-ISA Bridge (rev. 0x03)
timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000
gcscpcib0: Watchdog Timer via MFGPT0, GPIO
gpio0 at gcscpcib0: 32 pins
viaide0 at pci0 dev 15 function 2: AMD CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
ohci0 at pci0 dev 15 function 4: AMD CS5536 OHCI USB Controller (rev. 0x02)
ohci0: interrupting at irq 12
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
gcscehci0 at pci0 dev 15 function 5: AMD CS5536 EHCI USB Controller (rev. 0x02)
gcscehci0: interrupting at irq 12
gcscehci0: EHCI version 1.0
gcscehci0: 1 companion controller, 4 ports: ohci0
gcscehci0: Using DMA subregion for control data structures
usb1 at gcscehci0: USB revision 2.0
isa0 at gcscpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279
attimer0: attached to pcppi0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
wd0 at atabus0 drive 0
wd0: <SanDisk SDCFH-004G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 3815 MB, 7751 cyl, 16 head, 63 sec, 512 bytes/sect x 7813120 sectors
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66), WRITE DMA FUA
wd1 at atabus0 drive 1
wd1: <INTENSO>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA), WRITE DMA FUA EXT
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA), WRITE DMA FUA EXT
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/10.0/modules