Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-04-14 13:21:34
From: Ken Wellsch
Description: NetBSD/pmax 10.0 on DECstation 5000/15l (3MIN)
>>boot 3/rz0 NetBSD/pmax 10.0 FFSv1 Primary Bootstrap NetBSD/pmax 10.0 Secondary Bootstrap, Revision 1.5 (Thu Mar 28 08:33:33 UTC 2024) Boot: 3/rz0 Loading: 3/rz0/netbsd.pmax open 3/rz0/netbsd.pmax: No such file or directory Loading: 3/rz0/netbsd 4758800+118816 [261264+254072]=0x524f44 Starting at 0x80030000 [ 1.0000000] segment 0 start 00000000 size 08000000 [ 1.0000000] phys segment: 0x8000000 @ 0 [ 1.0000000] adding 0x2a9000 @ 0x557000 to freelist 1 [ 1.0000000] adding 0x7800000 @ 0x800000 to freelist 0 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/pmax/compile/GENERIC [ 1.0000000] DECstation 5000/15l (3MIN) [ 1.0000000] total memory = 128 MB [ 1.0000000] avail memory = 119 MB [ 1.0000000] mainbus0 (root) [ 1.0000000] cpu0 at mainbus0: MIPS R4000 CPU (0x430) Rev. 3.0 with MIPS R4010 FPC Rev. 0.0 [ 1.0000000] cpu0: 48 TLB entries, 16MB max page size [ 1.0000000] cpu0: 8KB/16B direct-mapped L1 instruction cache [ 1.0000000] cpu0: 8KB/16B direct-mapped write-back L1 data cache [ 1.0000000] cpu0: 1024KB/32B direct-mapped write-back L2 unified cache [ 1.0000000] tc0 at mainbus0: 12.5 MHz clock [ 1.0000000] ioasic0 at tc0 slot 3 offset 0x0 [ 1.0000000] le0 at ioasic0 offset 0xc0000: address [_MAC_XXXXXXXXXX] [ 1.0000000] le0: 32 receive buffers, 8 transmit buffers [ 1.0000000] zsc0 at ioasic0 offset 0x100000 [ 1.0000000] vsms0 at zsc0 channel 0 [ 1.0000000] wsmouse0 at vsms0 mux 0 [ 1.0000000] zstty0 at zsc0 channel 1 [ 1.0000000] zsc1 at ioasic0 offset 0x180000 [ 1.0000000] lkkbd0 at zsc1 channel 0 [ 1.0000000] lkkbd0: no keyboard [ 1.0000000] wskbd0 at lkkbd0 mux 1 [ 1.0000000] zstty1 at zsc1 channel 1 (console i/o) [ 1.0000000] mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible [ 1.0000000] asc0 at ioasic0 offset 0x300000: NCR53C94, 25MHz, SCSI ID 7 [ 1.0000000] scsibus0 at asc0: 8 targets, 8 luns per target [ 1.0048626] scsibus0: waiting 2 seconds for devices to settle... [ 1.0985834] WARNING: system needs entropy for security; see entropy(7) [ 3.1845249] sd0 at scsibus0 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed [ 3.2899436] sd0: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors [ 3.3876159] sd0: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers [ 3.4696388] sd1 at scsibus0 target 1 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed [ 3.5633932] sd1: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors [ 3.6572832] sd1: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers [ 3.7392001] sd2 at scsibus0 target 2 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed [ 3.8329317] sd2: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors [ 3.9276001] sd2: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers [ 4.0088091] sd3 at scsibus0 target 3 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed [ 4.1024804] sd3: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors [ 4.2001305] sd3: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers [ 4.2788062] sd4 at scsibus0 target 4 lun 0: <ZULUSCSI, HARDDRIVE, 2.0> disk fixed [ 4.3993522] sd4: 4095 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388607 sectors [ 4.4970134] sd4: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers [ 4.5755825] cd0 at scsibus0 target 5 lun 0: <ZULUSCSI, CDROM, 2.0> cdrom removable [ 4.6689044] cd0: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers [ 5.2392395] swwdog0: software watchdog initialized [ 5.3564204] boot device: sd0 [ 5.3915856] root on sd0a dumps on sd0b [ 5.4775171] root file system type: ffs [ 5.5282864] kern.module.path=/stand/pmax/10.0/modules [ 5.7743941] entropy: best effort Tue Dec 31 19:16:32 EST 2024 Starting root file system check: /dev/rsd0a: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 swapctl: setting dump device to /dev/sd1b swapctl: adding /dev/sd1b as swap device at priority 0 swapctl: setting dump device to /dev/sd2b swapctl: adding /dev/sd2b as swap device at priority 0 Starting file system checks: /dev/rsd1a: file system is clean; not checking /dev/rsd2a: file system is clean; not checking [ 35.8181443] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting dhcpcd. Building databases: dev, dev, utmp, utmpx. Starting syslogd. Setting date via ntp. Mounting all file systems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd0b swapctl: setting dump device to /dev/sd1b swapctl: setting dump device to /dev/sd2b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting ntpd. Starting inetd. Starting cron. Sun Apr 14 07:46:06 EDT 2024 NetBSD/pmax (Amnesiac) (constty) login: root