Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-04-18 14:32:50
From: tsutsui
Description: NetBSD/evbarm 10.0 on HP T5325
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.0 (HPT5325) #0: Thu Apr 18 23:27:49 JST 2024
	tsutsui@mirage:/s/netbsd-10/src/sys/arch/evbarm/compile/HPT5325
total memory = 512 MB
avail memory = 497 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: L1 16KB/32B 4-way (128 set) VIVT Instruction cache
cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIVT Data cache
mvsoc0 at mainbus0: Marvell 88F6281 Rev. A1  Kirkwood
mvsoc0: CPU Clock 1200.000 MHz  SysClock 400.000 MHz  TClock 200.000 MHz
mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer
mvsocgpp at mvsoc0 unit 0 not configured
mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock
com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, 16-byte FIFO
com0: console
com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, 16-byte FIFO
ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
gtidmac at mvsoc0 unit 0 not configured
gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller
iic0 at gttwsi0: I2C bus
mvcesa at mvsoc0 unit 0 not configured
mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller
mvgbe0 at mvgbec0 port 0 irq 11
mvgbe0: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at mvgbe0 phy 8: Marvell 88E1118 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller
mvgbe at mvgbec1 port 0 not configured
mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface
PCI: bus 0, device 1, function 0: Failed to allocate PCI memory space (67108864 req, prefetch=1 ok64=0)
PCI bus configuration failed: unable to assign all I/O and memory ranges.
pci0 at mvpex0
pci0: i/o space, memory space enabled
vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured
vendor 18ca product 0027 (VGA display) at pci0 dev 1 function 0 not configured
mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC)
mvsata0: GenIIe, 1hc, 2port/hc
atabus0 at mvsata0 channel 0
atabus1 at mvsata0 channel 1
mvsdio at mvsoc0 unit 0 not configured
timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
WARNING: system needs entropy for security; see entropy(7)
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
mvsata0 port 0: device present, speed: 1.5Gb/s
mvsata0 port 1: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <SM224>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 463 MB, 942 cyl, 16 head, 63 sec, 512 bytes/sect x 949536 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(mvsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <SUNEAST SSD SE800 mSATA 256GB>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd1(mvsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
uhub1 at uhub0 port 1: SMSC (0x0424) USB 2.0 4-Port Hub (0x2514), class 9/0, rev 2.00/0.00, addr 2
uhub1: multiple transaction translators
uhub1: 4 ports with 4 removable, self powered
boot device: <unknown>
root device: wd1
dump device (default wd1b): 
file system (default generic): 
root on wd1a dumps on wd1b
root file system type: ffs
kern.module.path=/stand/evbarm/10.0/modules
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
init path (default /sbin/init): 
init: trying /sbin/init
entropy: best effort