Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-05-07 08:02:15
From: cjh
Description: FreeBSD/amd64 on HPE ProLiant MicroServer Gen10
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-RELEASE-p5 #13 releng/14.0-n265410-adfda3c395f: Wed Mar 6 14:29:33 UTC 2024 root@nas:/usr/obj/usr/src/amd64.amd64/sys/NAS amd64 FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152) VT(vga): resolution 640x480 CPU: AMD Opteron(tm) X3216 APU (1597.09-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x660f01 Family=0x15 Model=0x60 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x2febbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC,MWAITX> Structured Extended Features=0x1a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2> XSAVE Features=0x1<XSAVEOPT> AMD Extended Feature Extensions ID EBX=0x1000<IBPB> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7725223936 (7367 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 1 TCP_ratelimit: Is now initialized TCP Hpts created 2 swi interrupt threads and bound 0 to cpus random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xdd975000-0xdd97501e smbios0: Version: 3.0, BCD Revision: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 450 apei0: <ACPI Platform Error Interface> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf07fffff,0xf0800000-0xf083ffff at device 1.0 on pci0 vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0 pci1: <ACPI PCI bus> on pcib1 ahci0: <Marvell 88SE9230 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xfea40000-0xfea407ff at device 0.0 on pci1 ahci0: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported ahci0: quirks=0x3000900<NOBSYRES,ALTSIG,IOMMU_BUSWIDE,SLOWDEV> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahcich6: <AHCI channel> at channel 6 on ahci0 ahcich7: <AHCI channel> at channel 7 on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 2.5 on pci0 pcib2: failed to allocate initial prefetch window: 0xf0800000-0xf08fffff pci2: <ACPI PCI bus> on pcib2 bge0: <HP Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0xfe900000-0xfe90ffff,0xfe910000-0xfe91ffff,0xfe920000-0xfe92ffff at device 0.0 on pci2 bge0: APE FW version: NCSI v1.4.1.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] bge1: <HP Ethernet 1Gb 2-port 332i Adapter, ASIC rev. 0x5720000> mem 0xfe930000-0xfe93ffff,0xfe940000-0xfe94ffff,0xfe950000-0xfe95ffff at device 0.1 on pci2 bge1: APE FW version: NCSI v1.4.1.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: [_MAC_XXXXXXXXXX] pci0: <encrypt/decrypt> at device 8.0 (no driver attached) xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb64000-0xfeb65fff at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci1: <AMD KERNCZ AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb69000-0xfeb693ff at device 17.0 on pci0 ahci1: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS ahcich8: <AHCI channel> at channel 0 on ahci1 ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb68000-0xfeb680ff at device 18.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 uart2: <16x50 with 256 byte FIFO> iomem 0xfedc6000-0xfedc7fff irq 10 on acpi0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounter "TSC" frequency 1597002574 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <AMD EHCI root HUB> at usbus1 ugen0.1: <AMD XHCI root HUB> at usbus0 uhub0 on usbus1 uhub1 on usbus0 uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Attempting to load tcp_bbr tcp_bbr is now available Trying to mount root from zfs:zroot/ROOT/default []... uhub1: 8 ports with 8 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 ugen0.2: <Realtek 802.11n WLAN Adapter> at usbus0 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Transcend JetDrive (0x174c:0x07d1) Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 Root mount waiting for: CAM usbus1 ada0 at ahcich2 bus 0 scbus2 target 0 lun 0 ada0: <WDC WD60EFAX-68SHWN0 82.00A82> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 5723166MB (11721045168 512 byte sectors) ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 ada1: <WDC WD60EFAX-68SHWN0 82.00A82> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 5723166MB (11721045168 512 byte sectors) ada2 at ahcich8 bus 0 scbus8 target 0 lun 0 ada2: <PNY CS900 240GB SSD CS900613> ACS-4 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 228936MB (468862128 512 byte sectors) pass2 at ahcich7 bus 0 scbus7 target 0 lun 0 pass2: <Marvell Console 1.01> Removable Processor SCSI device pass2: [_SERIAL_NUMBER_XXXXXXXXX] pass2: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) ugen1.3: <Transcend JetDrive> at usbus1 umass0 on uhub2 umass0: <Transcend JetDrive, class 0/0, rev 2.10/10.00, addr 3> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:9:0: Attached to scbus9 da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 da0: <JetDrive Transcend 0> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 239372MB (490234752 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 driver bug: Unable to set devclass (class: ppc devname: (unknown)) ig4iic0: <Designware I2C Controller> iomem 0xfedc2000-0xfedc2fff irq 3 on acpi0 iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 ig4iic1: <Designware I2C Controller> iomem 0xfedc3000-0xfedc3fff irq 15 on acpi0 iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP bge1: link state changed to DOWN rtwn0 on uhub1 rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 2> on usbus0