Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-05-12 19:40:42
From: Galaxis
Description: NetBSD/hppa 10.0 HP 9000 715/50
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/hppa/compile/GENERIC
HP9000/715/50 (Scorpio)
real mem = 65536 KB (73728 reserved for PROM, 52276 KB used by NetBSD)
avail mem = 51024 KB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: not available
cpu0 at mainbus0 hpa 0xfffbe000 path 8 irq 31: PA7100 (T-Bird) rev 0
cpu0: PCXT, PA-RISC 1.1b, lev 1, cat A, 50 MHz clk
cpu0: shadows, 64K/64K D/I caches, 120 shared TLB, 16 shared BTLB
cpu0: PCXT (Rolex - CMOS-26B) floating point, rev 1
mem0 at mainbus0 hpa 0xfffbf000 path 9: viper rev 0, ctrl 0x19a10001<eisa_den,lpmc_en> size 64MB
asp0 at mainbus0 hpa 0xf0000000 path 2 irq 28: Scorpio rev 1, lan 1 scsi 7
gsc0 at asp0: leds
oosiop0 at gsc0 hpa 0xf0825000 path 2/0/1 irq 9: NCR53C700 rev 0, 50MHz, SCSI ID 7
scsibus0 at oosiop0: 8 targets, 8 luns per target
iee0 at gsc0 hpa 0xf0826000 path 2/0/2 irq 8: Intel 82596DX/SX address [_MAC_XXXXXXXXXX]
hil0 at gsc0 hpa 0xf0821000 path 2/0/3 irq 1
com2 at gsc0 hpa 0xf0823000 path 2/0/4 irq 5: ns16550a, 16-byte FIFO
com2: console
com3 at gsc0 hpa 0xf0822000 path 2/0/5 irq 6: ns16550a, 16-byte FIFO
lpt1 at gsc0 hpa 0xf0824000 path 2/0/6 irq 7
harmony0 at gsc0 hpa 0xf1000000 path 2/0/8 irq 13: rev 0
audio0 at harmony0: playback, capture, full duplex
audio0: slinear_be:16 2ch 48000Hz, blk 4096 bytes (21.3ms) for playback
audio0: slinear_be:16 2ch 48000Hz, blk 4096 bytes (21.3ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
timecounter: Timecounter "itimer" frequency 50000000 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
hil0: no devices
WARNING: system needs entropy for security; see entropy(7)
sd0 at scsibus0 target 1 lun 0: <codesrc, SCSI2SD, 4.0> disk fixed
sd0: 2048 MB, 261 cyl, 255 head, 63 sec, 512 bytes/sect x 4194304 sectors
sd0: async, 8-bit transfers
sd1 at scsibus0 target 2 lun 0: <codesrc, SCSI2SD, 4.0> disk fixed
sd1: 4096 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388608 sectors
sd1: async, 8-bit transfers
sd2 at scsibus0 target 3 lun 0: <codesrc, SCSI2SD, 4.0> disk fixed
sd2: 4096 MB, 522 cyl, 255 head, 63 sec, 512 bytes/sect x 8388608 sectors
sd2: async, 8-bit transfers
sd3 at scsibus0 target 4 lun 0: <codesrc, SCSI2SD, 4.0> disk fixed
sd3: 4736 MB, 603 cyl, 255 head, 63 sec, 512 bytes/sect x 9700352 sectors
sd3: async, 8-bit transfers
swwdog0: software watchdog initialized
boot device: sd3
root on sd3a dumps on sd3b
root file system type: ffs
kern.module.path=/stand/hppa/10.0/modules