Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-06-21 03:13:14
From: Buddy.Jiang
Description: NomadBSD/amd64 on Dell Inc. OptiPlex 7070
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(efifb): resolution 2560x1440 module_register: cannot register pci/re from kernel; already loaded from if_re.ko Module pci/re failed to register: 17 module_register: cannot register re/miibus from kernel; already loaded from if_re.ko Module re/miibus failed to register: 17 CPU: Intel(R) Core(TM) i7-9700 CPU @ 3.00GHz (3000.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906ed Family=0x6 Model=0x9e Stepping=13 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features2=0x40000000<SGXLC> Structured Extended Features3=0xbc000e00<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x20cab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33100214272 (31566 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL CBX3 > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 2 1 4 5 6 7 3 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xf0000-0xf001e smbios0: Version: 3.1, BCD Revision: 3.1 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <DELL CBX3 > acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xa3000000-0xa3ffffff,0x90000000-0x9fffffff,0xa0000000-0xa1ffffff at device 0.0 on pci1 vgapci0: Boot video device hdac0: <NVIDIA (0x0fb9) HDA Controller> mem 0xa4080000-0xa4083fff at device 0.1 on pci1 vgapci1: <VGA-compatible display> port 0x4000-0x403f mem 0xa2000000-0xa2ffffff,0x80000000-0x8fffffff at device 2.0 on pci0 xhci0: <Intel Cannon Lake USB 3.1 controller> mem 0xa4220000-0xa422ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <serial bus> at device 21.0 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <Intel Cannon Lake AHCI SATA controller> port 0x4090-0x4097,0x4080-0x4083,0x4060-0x407f mem 0xa4234000-0xa4235fff,0xa423a000-0xa423a0ff,0xa4239000-0xa42397ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac1: <Intel Coffee Lake HDA Controller> mem 0xa4230000-0xa4233fff,0xa4100000-0xa41fffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) em0: <Intel(R) I219-LM CNP(7)> mem 0xa4200000-0xa421ffff at device 31.6 on pci0 em0: EEPROM V0.5-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 acpi_syscontainer0: <System Container> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate_intel0: <Intel Speed Shift> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 Timecounter "TSC-low" frequency 1500000118 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <NVIDIA (0x0080) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0080) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 5 on hdaa0 pcm2: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 6 on hdaa0 pcm3: <NVIDIA (0x0080) (HDMI/DP 8ch)> at nid 7 on hdaa0 hdacc1: <Realtek ALC255 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc1 pcm4: <Realtek ALC255 (Analog 2.0+HP)> at nid 20,33 on hdaa1 pcm5: <Realtek ALC255 (Rear Analog Line-out)> at nid 27 on hdaa1 hdacc2: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac1 hdaa2: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc2 pcm6: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa2 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Trying to mount root from zfs:nomadbsd_zroot/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD10EZEX-75WN4A1 13057113> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <SAMSUNG MZ7LN256HAJQ-000H1 MVT04H3Q> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada1: Command Queueing enabled ada1: 244198MB (500118192 512 byte sectors) ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 ses0: cd0,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 cd0: <PLDS DVD+-RW DU-8A5LH 6D1M> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uhub0: 26 ports with 26 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x0451 product 0x8342> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x0451 product 0x8342, class 9/0, rev 2.10/1.00, addr 1> on usbus0 uhub1: MTT enabled uhub1: 5 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 2.00/1.10, addr 2> on usbus0 kbd2 at ukbd0 ugen0.4: <PixArt Dell MS116 USB Optical Mouse> at usbus0 ums0 on uhub1 ums0: <PixArt Dell MS116 USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 3> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 Root mount waiting for: usbus0 ugen0.5: <ZhuHai JieLi Technology JBL PS3300> at usbus0 uaudio0 on uhub1 uaudio0: <ZhuHai JieLi Technology JBL PS3300, class 0/0, rev 1.10/1.00, addr 4> on usbus0 uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) uaudio0: No recording. uaudio0: No MIDI sequencer. pcm7 on uaudio0 uaudio0: HID volume keys found. ugen0.6: <vendor 0x0451 product 0x82ff> at usbus0 Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Western Digital P40 Game Drive (0x1058:0x266f) Root mount waiting for: usbus0 ugen0.7: <Western Digital P40 Game Drive> at usbus0 umass0 on uhub0 umass0: <Western Digital P40 Game Drive, class 0/0, rev 3.20/30.01, addr 6> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8000 umass0:5:0: Attached to scbus5 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: <WD P40 Game Drive 3001> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX] da0: 400.000MB/s transfers da0: 1907729MB (3907029168 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ses1 at umass-sim0 bus 0 scbus5 target 0 lun 1 ses1: <WD SES Device 3001> Fixed Enclosure Services SPC-4 SCSI device ses1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX] ses1: 400.000MB/s transfers ses1: SES Device ugen0.8: <vendor 0x0451 product 0x8340> at usbus0 uhub2 on uhub0 uhub2: <vendor 0x0451 product 0x8340, class 9/0, rev 3.10/1.00, addr 7> on usbus0 uhub2: 4 ports with 4 removable, self powered Cuse v0.1.37 @ /dev/cuse pchtherm0: <CannonLake-H Thermal Subsystem> mem 0xa423e000-0xa423efff at device 18.0 on pci0 ig4iic0: <Intel Cannon Lake-H I2C Controller-0> at device 21.0 on pci0 ig4iic0: Using MSI iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 iicbus0: <unknown card> at addr 0x8 ichsmb0: <Intel Cannon Lake SMBus controller> port 0xefa0-0xefbf mem 0xa4238000-0xa42380ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_GPE.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: cannot find EC device acpi_wmi2: Embedded MOF found ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi3: <ACPI-WMI mapping> on acpi0 acpi_wmi3: cannot find EC device acpi_wmi3: Embedded MOF found ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi4: <ACPI-WMI mapping> on acpi0 acpi_wmi4: cannot find EC device acpi_wmi4: Embedded MOF found ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi5: <ACPI-WMI mapping> on acpi0 acpi_wmi5: cannot find EC device acpi_wmi5: Embedded MOF found ACPI: \134_SB.AMW4.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi6: <ACPI-WMI mapping> on acpi0 acpi_wmi6: cannot find EC device acpi_wmi6: Embedded MOF found ACPI: \134_SB.AMW2.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) em0: link state changed to UP lo0: link state changed to UP uhid0 on uhub1 uhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 2.00/1.10, addr 2> on usbus0 uhid1 on uhub1 uhid1: <vendor 0x0451 product 0x82ff, class 0/0, rev 2.01/1.00, addr 5> on usbus0