Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2024-06-30 02:08:28
From: yamori813
Description: IOData_WN-SX300FR WITHOUT_WIRELESS
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-STABLE #29 zrouter_yamori813-n234903-b0efa0f0cd83-dirty: Sun Jun 30 11:05:29 JST 2024
hiroki@zrouter:/usr/home/hiroki/obj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd-src/mips.mipsel/sys/IOData_WN-SX300FR mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x8033db70.
CPU: MIPS Technologies (MT7628 ) processor v85.150
MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 512 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
L2 cache: disabled
Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config2=0x80000000
Config3=0x2420<ULRI,DSPP,VInt>
Config7=0x80010400<WII,AR>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x003d6000 - 0x03ef0fff, 61976576 bytes (15131 pages)
avail memory = 61145088 (58MB)
random: no preloaded entropy cache
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
hostuuid: using 00000000-0000-0000-0000-000000000000
ULE: setup cpu 0
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
mem: <memory>
nexus0: <MIPS32 root nexus>
ofwbus0: <Open Firmware Device Tree> on nexus0
palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0
simplebus0: <Flattened device tree simple bus> mem 0x600-0x6ff irq 10 on palmbus0
cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
sysc0: <MTK System Controller> mem 0-0xff on palmbus0
pinctrl0: <MTK Pin Controller> on ofwbus0
pinctrl0: GPIO mode start: 0x54150445
Processing 1 pin-config node(s) in pinctrl-0 for spi@b00
Processing 1 pin-config node(s) in pinctrl-0 for uartlite@c00
Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
pinctrl0: GPIO mode end : 0x54150445
rstctrl0: <MTK Reset Controller> on ofwbus0
clkctrl0: <MTK Clock Controller> on ofwbus0
intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 8 on palmbus0
gpio0: <MTK GPIO Controller (v2)> mem 0-0xff irq 17 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <MTK GPIO Controller (v2)> mem 0-0xff irq 18 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <MTK GPIO Controller (v2)> mem 0-0xff irq 19 on simplebus0
gpiobus2: <OFW GPIO bus> on gpio2
cpulist0: <Open Firmware CPU Group> on ofwbus0
palmbus0: <watchdog@120> mem 0x120-0x12f irq 7 compat ralink,mt7628an-wdt (no driver attached)
palmbus0: <memc@300> mem 0x300-0x3ff irq 9 compat ralink,mt7620a-memc (no driver attached)
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
palmbus0: <i2c@900> mem 0x900-0x9ff disabled compat mediatek,mt7628-i2c (no driver attached)
palmbus0: <i2s@a00> mem 0xa00-0xaff irq 11 disabled compat ralink,mt7620a-i2s (no driver attached)
spi0: <MTK SPI Controller (v2)> mem 0xb00-0xbff on palmbus0
spibus0: <OFW SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K
uart0: <Non-standard ns8250 class UART with FIFOs> mem 0xc00-0xcff irq 12 on palmbus0
uart0: console (58139,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
palmbus0: <uart1@d00> mem 0xd00-0xdff irq 13 disabled compat ns16550a (no driver attached)
palmbus0: <uart2@e00> mem 0xe00-0xeff irq 14 disabled compat ns16550a (no driver attached)
palmbus0: <pwm@5000> mem 0x5000-0x5fff disabled compat mediatek,mt7628-pwm (no driver attached)
palmbus0: <pcm@2000> mem 0x2000-0x27ff irq 15 disabled compat ralink,mt7620a-pcm (no driver attached)
palmbus0: <gdma@2800> mem 0x2800-0x2fff irq 16 disabled compat ralink,mt7620a-gdma (no driver attached)
ofwbus0: <usbphy@10120000> mem 0x10120000-0x10123fff compat ralink,mt7628an-usbphy (no driver attached)
ofwbus0: <sdhci@10130000> mem 0x10130000-0x10133fff irq 0 disabled compat ralink,mt7620-sdhci (no driver attached)
ofwbus0: <ehci@101c0000> mem 0x101c0000-0x101c0fff irq 1 compat generic-ehci (no driver attached)
ofwbus0: <ohci@101c1000> mem 0x101c1000-0x101c1fff irq 2 compat generic-ohci (no driver attached)
rt0: <Ralink RT5350 onChip Ethernet driver> mem 0x10100000-0x1010ffff irq 3 on ofwbus0
rt0: RT5350 Ethernet MAC (rev 0x00000000)
rt0: use hardcoded [_MAC_XXXXXXXXXX] macaddr
rt0: bpf attached
rt0: Ethernet address: [_MAC_XXXXXXXXXX]
mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 4 on ofwbus0
miibus0: <MII bus> on mtkswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x0017a5, model 0x0001, rev. 0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus1: <MII bus> on mtkswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x0017a5, model 0x0001, rev. 0
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus2: <MII bus> on mtkswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x0017a5, model 0x0001, rev. 0
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus3: <MII bus> on mtkswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x0017a5, model 0x0001, rev. 0
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus4: <MII bus> on mtkswitch0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x0017a5, model 0x0001, rev. 0
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
etherswitch0: <Switch controller> on mtkswitch0
mdio0: <MDIO> on mtkswitch0
ofwbus0: <pcie@10140000> mem 0x10140000-0x1014ffff irq 5 disabled type pci compat mediatek,mt7628-pci (no driver attached)
ofwbus0: <wmac@10300000> mem 0x10300000-0x103fffff irq 6 compat mediatek,mt7628-wmac (no driver attached)
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 290000000 Hz quality 800
Event timer "MIPS32" frequency 290000000 Hz quality 800
Device configuration finished.
Timecounters tick every 10.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
mtkswitch0port0: link state changed to DOWN
mtkswitch0port1: link state changed to DOWN
mtkswitch0port2: link state changed to DOWN
mtkswitch0port3: link state changed to DOWN
mtkswitch0port4: link state changed to DOWN
GEOM: new disk flash/spi0
Trying to mount root from cd9660:/dev/flash/spi0s.rootfs.uzip []...
flash/spi0: slice 00000000-002fffff: z-loader (3071KB)
flash/spi0: slice 002f0000-002fffff: factory (63KB)
flash/spi0: slice 000f0000-000fffff: u-boot-env (63KB)
flash/spi0: slice 00300000-003fffff: kernel (1023KB)
flash/spi0: slice 00400000-007fffff: rootfs (4095KB)
flash/spi0: slice 00300000-007fffff: upgrade (5119KB)
MAP: No valid partition found at flash/spi0
MAP: No valid partition found at flash/spi0s.z-loader
MAP: No valid partition found at flash/spi0s.factory
MAP: No valid partition found at flash/spi0s.u-boot-env
MAP: No valid partition found at flash/spi0s.kernel
MAP: No valid partition found at flash/spi0s.rootfs
MAP: No valid partition found at flash/spi0s.upgrade
MAP: No valid partition found at flash/spi0s.rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
start_init: trying /sbin/init
mtkswitch0port3: link state changed to UP
MAP: No valid partition found at md0
random: randomdev_wait_until_seeded unblock wait
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME