Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-07-06 19:04:30
From: LWR
Description: Alpha Server 1000/A 5/400
[ 1.000000] consinit: not using prom console [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/GENERIC [ 1.000000] AlphaServer 1000A 5/400, 400MHz, s/n [ 1.000000] 8192 byte page size, 1 processor. [ 1.000000] total memory = 2048 MB [ 1.000000] (1944 KB reserved for PROM, 2046 MB used by NetBSD) [ 1.000000] avail memory = 2003 MB [ 1.000000] timecounter: Timecounters tick every 0.976 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0: ID 0 (primary), 21164A-2 (EV56) [ 1.000000] cpu0: Architecture extensions: 0x1<BWX> [ 1.000000] cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 3 [ 1.000000] cia0: extended capabilities: 0x21<DWEN,BWEN> [ 1.000000] cia0: using BWX for PCI config access [ 1.000000] pci0 at cia0 bus 0 [ 1.000000] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] pceb0 at pci0 dev 7 function 0: Intel 82375EB/SB PCI-EISA Bridge (rev. 0x05) [ 1.000000] ppb0 at pci0 dev 8 function 0: Digital Equipment DC21050 PCI-PCI Bridge (rev. 0x02) [ 1.000000] pci1 at ppb0 bus 2 [ 1.000000] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.000000] isp0 at pci1 dev 0 function 0: QLogic 1020 Fast Wide SCSI HBA [ 1.000000] isp0: interrupting at dec 1000a irq 0 [ 1.000000] isp0: invalid NVRAM header [ 1.000000] vga0 at pci0 dev 11 function 0: Texas Instruments TVP4020 Permedia 2 (rev. 0x01) [ 1.000000] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) [ 1.000000] wsmux1: connecting to wsdisplay0 [ 1.000000] drm at vga0 not configured [ 1.000000] tlp0 at pci0 dev 12 function 0: DECchip 21140 Ethernet, pass 1.2 [ 1.000000] tlp0: interrupting at dec 1000a irq 3 [ 1.000000] tlp0: DEC DE500-XA, Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] tlp0: 10baseT, 100baseTX, 100baseTX-FDX, 10baseT-FDX [ 1.000000] tlp1 at pci0 dev 13 function 0: DECchip 21140A Ethernet, pass 2.2 [ 1.000000] tlp1: interrupting at dec 1000a irq 5 [ 1.000000] tlp1: DEC DE500-AA, Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] nsphy0 at tlp1 phy 5: DP83840 10/100 media interface, rev. 0 [ 1.000000] nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] eisa0 at pceb0 [ 1.000000] eisa0: autoconfiguration error: can't map I/O space for slot 9 [ 1.000000] isa0 at pceb0 [ 1.000000] lpt0 at isa0 port 0x3bc-0x3bf irq 7 [ 1.000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.000000] pckbc0 at isa0 port 0x60-0x64 [ 1.000000] pckbd0 at pckbc0 (kbd slot) [ 1.000000] pckbc0: using irq 1 for kbd slot [ 1.000000] wskbd0 at pckbd0: console keyboard, using wsdisplay0 [ 1.000000] pms0 at pckbc0 (aux slot) [ 1.000000] pckbc0: using irq 12 for aux slot [ 1.000000] wsmouse0 at pms0 mux 0 [ 1.000000] attimer0 at isa0 port 0x40-0x43 [ 1.000000] pcppi0 at isa0 port 0x61 [ 1.000000] spkr0 at pcppi0: PC Speaker [ 1.000000] wsbell at spkr0 not configured [ 1.000000] midi0 at pcppi0: PC speaker [ 1.000000] isabeep0 at pcppi0 [ 1.000000] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.000000] attimer0: attached to pcppi0 [ 1.000000] timecounter: Timecounter "PCC" frequency 399969696 Hz quality 1000 [ 1.000249] timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0 [ 1.002143] scsibus0 at isp0: 16 targets, 8 luns per target [ 1.004091] scsibus0: waiting 2 seconds for devices to settle... [ 1.009952] WARNING: system needs entropy for security; see entropy(7) [ 3.007999] sd0 at scsibus0 target 0 lun 0: <COMPAQ, BD009122C6, B016> disk fixed [ 3.187687] sd0: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors [ 3.191602] sd0: sync (100.00ns offset 12), 16-bit (20.000MB/s) transfers, tagged queueing [ 3.194528] sd1 at scsibus0 target 1 lun 0: <COMPAQ, BD009122C6, B016> disk fixed [ 3.375191] sd1: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors [ 3.378115] sd1: sync (100.00ns offset 12), 16-bit (20.000MB/s) transfers, tagged queueing [ 9.895751] swwdog0: software watchdog initialized [ 9.905506] sd0: no disk label [ 9.911366] sd0: no disk label [ 9.926021] WARNING: 1 error while detecting hardware; check system log. [ 9.927977] root on sd1a dumps on sd1b [ 9.930910] entropy: best effort [ 9.940663] root file system type: ffs [ 9.942617] kern.module.path=/stand/alpha/10.0/modules [ 9.943602] WARNING: preposterous TOD clock time [ 9.943602] WARNING: using filesystem time [ 9.944108] WARNING: CHECK AND RESET THE DATE! [ 14.125285] entropy: ready