Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-07-14 21:24:44
From: matthb2
Description: FreeBSD/amd64 on Supermicro X9SRL-F
ix1: link state changed to UP ix3: link state changed to UP ioat0: <SNB IOAT Ch0> mem 0xfb81c000-0xfb81ffff irq 31 at device 4.0 on pci0 ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat1: <SNB IOAT Ch1> mem 0xfb818000-0xfb81bfff irq 39 at device 4.1 on pci0 ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat2: <SNB IOAT Ch2> mem 0xfb814000-0xfb817fff irq 31 at device 4.2 on pci0 ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat3: <SNB IOAT Ch3> mem 0xfb810000-0xfb813fff irq 39 at device 4.3 on pci0 ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat4: <SNB IOAT Ch4> mem 0xfb80c000-0xfb80ffff irq 31 at device 4.4 on pci0 ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat5: <SNB IOAT Ch5> mem 0xfb808000-0xfb80bfff irq 39 at device 4.5 on pci0 ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat6: <SNB IOAT Ch6> mem 0xfb804000-0xfb807fff irq 31 at device 4.6 on pci0 ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat7: <SNB IOAT Ch7> mem 0xfb800000-0xfb803fff irq 39 at device 4.7 on pci0 ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ums0 on uhub2 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 lagg0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done All buffers synced. Uptime: 26m42s ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE-p11 GENERIC amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2400.15-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 68727865344 (65544 MB) avail memory = 66777018368 (63683 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 ioapic1 <Version 2.0> irqs 24-47 Launching APs: 3 2 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <SUPERM SMCI--MB> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 27 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 mps0: <Avago Technologies (LSI) SAS2008> port 0xe000-0xe0ff mem 0xfac00000-0xfac03fff,0xfab80000-0xfabbffff irq 26 at device 0.0 on pci1 mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 mps1: <Avago Technologies (LSI) SAS2008> port 0xd000-0xd0ff mem 0xfa600000-0xfa603fff,0xfa580000-0xfa5bffff irq 32 at device 0.0 on pci2 mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd mps1: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 43 at device 3.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc020-0xc03f mem 0xf9080000-0xf90fffff,0xf9104000-0xf9107fff irq 40 at device 0.0 on pci4 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 4 RX queues 4 TX queues ix0: Using MSI-X interrupts with 5 vectors ix0: allocated for 4 queues ix0: allocated for 4 rx queues ix0: Ethernet address: [_MAC_XXXXXXXXXX] ix0: PCI Express Bus: Speed 5.0GT/s Width x4 ix0: eTrack 0x000161c1 PHY FW V65535 ix0: netmap queues/slots: TX 4/2048, RX 4/2048 ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc000-0xc01f mem 0xf9000000-0xf907ffff,0xf9100000-0xf9103fff irq 44 at device 0.1 on pci4 ix1: Using 2048 TX descriptors and 2048 RX descriptors ix1: Using 4 RX queues 4 TX queues ix1: Using MSI-X interrupts with 5 vectors ix1: allocated for 4 queues ix1: allocated for 4 rx queues ix1: Ethernet address: [_MAC_XXXXXXXXXX] ix1: PCI Express Bus: Speed 5.0GT/s Width x4 ix1: eTrack 0x000161c1 PHY FW V65535 ix1: netmap queues/slots: TX 4/2048, RX 4/2048 pcib5: <ACPI PCI-PCI bridge> irq 43 at device 3.1 on pci0 pci5: <ACPI PCI bus> on pcib5 ix2: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xb020-0xb03f mem 0xf8e80000-0xf8efffff,0xf8f04000-0xf8f07fff irq 41 at device 0.0 on pci5 ix2: Using 2048 TX descriptors and 2048 RX descriptors ix2: Using 4 RX queues 4 TX queues ix2: Using MSI-X interrupts with 5 vectors ix2: allocated for 4 queues ix2: allocated for 4 rx queues ix2: Ethernet address: [_MAC_XXXXXXXXXX] ix2: PCI Express Bus: Speed 5.0GT/s Width x4 ix2: eTrack 0x000161c1 PHY FW V65535 ix2: netmap queues/slots: TX 4/2048, RX 4/2048 ix3: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xb000-0xb01f mem 0xf8e00000-0xf8e7ffff,0xf8f00000-0xf8f03fff irq 45 at device 0.1 on pci5 ix3: Using 2048 TX descriptors and 2048 RX descriptors ix3: Using 4 RX queues 4 TX queues ix3: Using MSI-X interrupts with 5 vectors ix3: allocated for 4 queues ix3: allocated for 4 rx queues ix3: Ethernet address: [_MAC_XXXXXXXXXX] ix3: PCI Express Bus: Speed 5.0GT/s Width x4 ix3: eTrack 0x000161c1 PHY FW V65535 ix3: netmap queues/slots: TX 4/2048, RX 4/2048 pcib6: <ACPI PCI-PCI bridge> irq 43 at device 3.2 on pci0 pci6: <ACPI PCI bus> on pcib6 pci6: <serial bus> at device 0.0 (no driver attached) pcib7: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 pci7: <ACPI PCI bus> on pcib7 isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xa000-0xa0ff mem 0xf8c7c000-0xf8c7ffff,0xf8800000-0xf8bfffff irq 16 at device 0.0 on pci7 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb823000-0xfb8233ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci9: <ACPI PCI bus> on pcib9 em0: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xfb600000-0xfb61ffff,0xfb620000-0xfb623fff irq 18 at device 0.0 on pci9 em0: EEPROM V2.1-2 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci10: <ACPI PCI bus> on pcib10 em1: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xfb500000-0xfb51ffff,0xfb520000-0xfb523fff irq 19 at device 0.0 on pci10 em1: EEPROM V2.1-2 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 2 RX queues 2 TX queues em1: Using MSI-X interrupts with 3 vectors em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: netmap queues/slots: TX 2/1024, RX 2/1024 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb822000-0xfb8223ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib11 vgapci0: <VGA-compatible display> mem 0xf7000000-0xf7ffffff,0xfa000000-0xfa003fff,0xf9800000-0xf9ffffff irq 16 at device 4.0 on pci11 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfb821000-0xfb8217ff irq 18 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib12: <ACPI Host-PCI bridge> on acpi0 pci12: <ACPI PCI bus> on pcib12 pci12: <dasp, performance counters> at device 14.1 (no driver attached) pci12: <dasp, performance counters> at device 19.1 (no driver attached) pci12: <dasp, performance counters> at device 19.4 (no driver attached) pci12: <dasp, performance counters> at device 19.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 uart2: console (115200,n,8,1) orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff,0xc9800-0xca7ff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1199999864 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0 on usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1 on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Trying to mount root from zfs:zroot/ROOT/default []... uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 Root mount waiting for:uhub2 CAM usbus0 usbus1 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub3 on uhub1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub3: 6 ports with 6 removable, self powered Root mount waiting for: CAM usbus0 usbus1 uhub2: 8 ports with 8 removable, self powered ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 ukbd0 on uhub3 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 kbd2 at ukbd0 Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for: CAM mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 (probe4:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:19:0): CAM status: CCB request completed with an error (probe4:mps0:0:19:0): Retrying command, 3 more tries remain (probe5:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:23:0): CAM status: CCB request completed with an error (probe5:mps0:0:23:0): Retrying command, 3 more tries remain (probe6:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:29:0): CAM status: CCB request completed with an error (probe6:mps0:0:29:0): Retrying command, 3 more tries remain (probe7:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:26:0): CAM status: CCB request completed with an error (probe7:mps0:0:26:0): Retrying command, 3 more tries remain (probe0:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:24:0): CAM status: CCB request completed with an error (probe0:mps0:0:24:0): Retrying command, 3 more tries remain (probe1:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:25:0): CAM status: CCB request completed with an error (probe1:mps0:0:25:0): Retrying command, 3 more tries remain (probe2:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:43:0): CAM status: CCB request completed with an error (probe2:mps0:0:43:0): Retrying command, 3 more tries remain (probe3:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:35:0): CAM status: CCB request completed with an error (probe3:mps0:0:35:0): Retrying command, 3 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 3 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 3 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 3 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 3 more tries remain (probe4:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:19:0): CAM status: CCB request completed with an error (probe4:mps0:0:19:0): Retrying command, 2 more tries remain (probe5:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:23:0): CAM status: CCB request completed with an error (probe5:mps0:0:23:0): Retrying command, 2 more tries remain (probe6:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:29:0): CAM status: CCB request completed with an error (probe6:mps0:0:29:0): Retrying command, 2 more tries remain (probe7:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:26:0): CAM status: CCB request completed with an error (probe7:mps0:0:26:0): Retrying command, 2 more tries remain (probe0:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:24:0): CAM status: CCB request completed with an error (probe0:mps0:0:24:0): Retrying command, 2 more tries remain (probe1:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:25:0): CAM status: CCB request completed with an error (probe1:mps0:0:25:0): Retrying command, 2 more tries remain (probe2:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:43:0): CAM status: CCB request completed with an error (probe2:mps0:0:43:0): Retrying command, 2 more tries remain (probe3:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:35:0): CAM status: CCB request completed with an error (probe3:mps0:0:35:0): Retrying command, 2 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 2 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 2 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 2 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 2 more tries remain (probe4:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:19:0): CAM status: CCB request completed with an error (probe4:mps0:0:19:0): Retrying command, 1 more tries remain (probe5:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:23:0): CAM status: CCB request completed with an error (probe5:mps0:0:23:0): Retrying command, 1 more tries remain (probe6:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:29:0): CAM status: CCB request completed with an error (probe6:mps0:0:29:0): Retrying command, 1 more tries remain (probe7:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:26:0): CAM status: CCB request completed with an error (probe7:mps0:0:26:0): Retrying command, 1 more tries remain (probe0:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:24:0): CAM status: CCB request completed with an error (probe0:mps0:0:24:0): Retrying command, 1 more tries remain (probe1:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:25:0): CAM status: CCB request completed with an error (probe1:mps0:0:25:0): Retrying command, 1 more tries remain (probe2:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:43:0): CAM status: CCB request completed with an error (probe2:mps0:0:43:0): Retrying command, 1 more tries remain (probe3:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:35:0): CAM status: CCB request completed with an error (probe3:mps0:0:35:0): Retrying command, 1 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 1 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 1 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 1 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 1 more tries remain (probe4:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:19:0): CAM status: CCB request completed with an error (probe4:mps0:0:19:0): Retrying command, 0 more tries remain (probe5:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:23:0): CAM status: CCB request completed with an error (probe5:mps0:0:23:0): Retrying command, 0 more tries remain (probe6:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:29:0): CAM status: CCB request completed with an error (probe6:mps0:0:29:0): Retrying command, 0 more tries remain (probe7:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:26:0): CAM status: CCB request completed with an error (probe7:mps0:0:26:0): Retrying command, 0 more tries remain (probe0:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:24:0): CAM status: CCB request completed with an error (probe0:mps0:0:24:0): Retrying command, 0 more tries remain (probe1:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:25:0): CAM status: CCB request completed with an error (probe1:mps0:0:25:0): Retrying command, 0 more tries remain (probe2:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:43:0): CAM status: CCB request completed with an error (probe2:mps0:0:43:0): Retrying command, 0 more tries remain (probe3:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:35:0): CAM status: CCB request completed with an error (probe3:mps0:0:35:0): Retrying command, 0 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 0 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 0 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 0 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 0 more tries remain (probe4:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:19:0): CAM status: CCB request completed with an error (probe4:mps0:0:19:0): Error 5, Retries exhausted (probe5:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:23:0): CAM status: CCB request completed with an error (probe5:mps0:0:23:0): Error 5, Retries exhausted (probe6:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:29:0): CAM status: CCB request completed with an error (probe6:mps0:0:29:0): Error 5, Retries exhausted (probe7:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:26:0): CAM status: CCB request completed with an error (probe7:mps0:0:26:0): Error 5, Retries exhausted (probe0:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:24:0): CAM status: CCB request completed with an error (probe0:mps0:0:24:0): Error 5, Retries exhausted (probe1:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:25:0): CAM status: CCB request completed with an error (probe1:mps0:0:25:0): Error 5, Retries exhausted (probe2:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:43:0): CAM status: CCB request completed with an error Root mount waiting for:(probe2:mps0:0:43:0): Error 5, Retries exhausted (probe3:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 CAM (probe3:mps0:0:35:0): CAM status: CCB request completed with an error (probe3:mps0:0:35:0): Error 5, Retries exhausted (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Error 5, Retries exhausted (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Error 5, Retries exhausted (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Error 5, Retries exhausted (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Error 5, Retries exhausted ada0 at ahcich0 bus 0 scbus3 target 0 lun 0 ada0: <INTEL SSDSC2CW120A3 400i> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich1 bus 0 scbus4 target 0 lun 0 ada1: <INTEL SSDSC2CW120A3 400i> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 114473MB (234441648 512 byte sectors) ses0 at mps0 bus 0 scbus0 target 10 lun 0 ses0: <LSI SAS2X36 0e0b> Fixed Enclosure Services SPC-3 SCSI device ses0: Serial Number ses0: 600.000MB/s transfers ses0: Command Queueing enabled ses0: SES Device da3 at mps1 bus 0 scbus1 target 25 lun 0 da3: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da3: [_SERIAL_NUMBER_XXXXXXXXXXXX] da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 1907729MB (3907029168 512 byte sectors) da0 at mps1 bus 0 scbus1 target 19 lun 0 da0: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXX] da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 1907729MB (3907029168 512 byte sectors) ses1 at mps1 bus 0 scbus1 target 10 lun 0 ses1: <LSI SAS2X36 0e0b> Fixed Enclosure Services SPC-3 SCSI device ses1: Serial Number ses1: 600.000MB/s transfers ses1: Command Queueing enabled ses1: SES Device da4 at mps1 bus 0 scbus1 target 26 lun 0 da4: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device da4: [_SERIAL_NUMBER_XXXXXXXXXXXX] da4: 300.000MB/s transfers da4: Command Queueing enabled da4: 1907729MB (3907029168 512 byte sectors) da6 at mps1 bus 0 scbus1 target 31 lun 0 da6: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da6: [_SERIAL_NUMBER_XXXXXXXXX] da6: 600.000MB/s transfers da6: Command Queueing enabled da6: 15259648MB (31251759104 512 byte sectors) da7 at mps1 bus 0 scbus1 target 32 lun 0 da7: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da7: [_SERIAL_NUMBER_XXXXXXXXX] da7: 600.000MB/s transfers da7: Command Queueing enabled da7: 15259648MB (31251759104 512 byte sectors) da8 at mps1 bus 0 scbus1 target 33 lun 0 da8: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da8: [_SERIAL_NUMBER_XXXXXXXXX] da8: 600.000MB/s transfers da8: Command Queueing enabled da8: 15259648MB (31251759104 512 byte sectors) da10 at mps1 bus 0 scbus1 target 35 lun 0 da10: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da10: [_SERIAL_NUMBER_XXXXXXXXX] da10: 600.000MB/s transfers da10: Command Queueing enabled da10: 15259648MB (31251759104 512 byte sectors) da9 at mps1 bus 0 scbus1 target 34 lun 0 da9: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da9: [_SERIAL_NUMBER_XXXXXXXXX] da9: 600.000MB/s transfers da9: Command Queueing enabled da9: 15259648MB (31251759104 512 byte sectors) ses2 at ahciem0 bus 0 scbus9 target 0 lun 0 ses2: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses2: SEMB SES Device da11 at mps1 bus 0 scbus1 target 43 lun 0 da11: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da11: [_SERIAL_NUMBER_XXXXXXXXX] da11: 600.000MB/s transfers da11: Command Queueing enabled da11: 15259648MB (31251759104 512 byte sectors) da2 at mps1 bus 0 scbus1 target 24 lun 0 da2: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da2: [_SERIAL_NUMBER_XXXXXXXXXXXX] da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 1907729MB (3907029168 512 byte sectors) da1 at mps1 bus 0 scbus1 target 23 lun 0 da1: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXXXXX] da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 1907729MB (3907029168 512 byte sectors) da5 at mps1 bus 0 scbus1 target 29 lun 0 da5: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device da5: [_SERIAL_NUMBER_XXXXXXXXXXXX] da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 1907729MB (3907029168 512 byte sectors) cd0 at ahcich2 bus 0 scbus5 target 0 lun 0 cd0: <TEAC DV-28S-Y 1.4A> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ses2: ada0,pass14 in 'Slot 00', SATA Slot: scbus3 target 0 ses1: da0,pass2 in 'Slot 01', SAS Slot: 1 phys at slot 0 ses2: ada1,pass15 in 'Slot 01', SATA Slot: scbus4 target 0 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a760c ses1: da1,pass3 in 'Slot 06', SAS Slot: 1 phys at slot 5 ses2: pass16,cd0 in 'Slot 02', SATA Slot: scbus5 target 0 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7611 ses1: da5,pass7 in 'Slot 09', SAS Slot: 1 phys at slot 8 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7614 ses1: da4,pass6 in 'Slot 10', SAS Slot: 1 phys at slot 9 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7615 ses1: da2,pass4 in 'Slot 11', SAS Slot: 1 phys at slot 10 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7616 ses1: da3,pass5 in 'Slot 12', SAS Slot: 1 phys at slot 11 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7617 ses1: da11,pass13 in 'Slot 13', SAS Slot: 1 phys at slot 12 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7618 ses1: da10,pass12 in 'Slot 14', SAS Slot: 1 phys at slot 13 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7619 ses1: da9,pass11 in 'Slot 15', SAS Slot: 1 phys at slot 14 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761a ses1: da8,pass10 in 'Slot 16', SAS Slot: 1 phys at slot 15 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761b ses1: da7,pass9 in 'Slot 17', SAS Slot: 1 phys at slot 16 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761c ses1: da6,pass8 in 'Slot 18', SAS Slot: 1 phys at slot 17 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761d Dual Console: Serial Primary, Video Secondary Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat Deprecated code (to be removed in FreeBSD 14): FreeBSD 12.x ABI compat lo0: link state changed to UP ix1: link state changed to UP ix3: link state changed to UP mlx4_core0: <mlx4_core> mem 0xfb700000-0xfb7fffff,0xf8000000-0xf87fffff irq 42 at device 0.0 on pci6 mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) mlx4_core: Initializing 0000:08:00.0 mlx4_core0: Unable to determine PCI device chain minimum BW ioat0: <SNB IOAT Ch0> mem 0xfb81c000-0xfb81ffff irq 31 at device 4.0 on pci0 ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat1: <SNB IOAT Ch1> mem 0xfb818000-0xfb81bfff irq 39 at device 4.1 on pci0 ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat2: <SNB IOAT Ch2> mem 0xfb814000-0xfb817fff irq 31 at device 4.2 on pci0 ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat3: <SNB IOAT Ch3> mem 0xfb810000-0xfb813fff irq 39 at device 4.3 on pci0 ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat4: <SNB IOAT Ch4> mem 0xfb80c000-0xfb80ffff irq 31 at device 4.4 on pci0 ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat5: <SNB IOAT Ch5> mem 0xfb808000-0xfb80bfff irq 39 at device 4.5 on pci0 ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat6: <SNB IOAT Ch6> mem 0xfb804000-0xfb807fff irq 31 at device 4.6 on pci0 ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat7: <SNB IOAT Ch7> mem 0xfb800000-0xfb803fff irq 39 at device 4.7 on pci0 ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> lagg0: link state changed to UP ichsmb0: <Intel Patsburg SMBus controller> port 0x1180-0x119f mem 0xfb820000-0xfb8200ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device ums0 on uhub3 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 Security policy loaded: MAC/ntpd (mac_ntpd) pid 2015 (mountd), jid 0, uid 0: exited on signal 10 (core dumped) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done All buffers synced. Uptime: 7m28s ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.2-RELEASE-p11 GENERIC amd64 FreeBSD clang version 14.0.5 (https://github.com/llvm/llvm-project.git llvmorg-14.0.5-0-gc12386ae247c) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E5-2609 0 @ 2.40GHz (2400.12-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 68727865344 (65544 MB) avail memory = 66777018368 (63683 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 ioapic1 <Version 2.0> irqs 24-47 Launching APs: 3 1 2 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <SUPERM SMCI--MB> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 27 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 mps0: <Avago Technologies (LSI) SAS2008> port 0xe000-0xe0ff mem 0xfac00000-0xfac03fff,0xfab80000-0xfabbffff irq 26 at device 0.0 on pci1 mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> pcib2: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 mps1: <Avago Technologies (LSI) SAS2008> port 0xd000-0xd0ff mem 0xfa600000-0xfa603fff,0xfa580000-0xfa5bffff irq 32 at device 0.0 on pci2 mps1: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd mps1: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR> pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 43 at device 3.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc020-0xc03f mem 0xf9080000-0xf90fffff,0xf9104000-0xf9107fff irq 40 at device 0.0 on pci4 ix0: Using 2048 TX descriptors and 2048 RX descriptors ix0: Using 4 RX queues 4 TX queues ix0: Using MSI-X interrupts with 5 vectors ix0: allocated for 4 queues ix0: allocated for 4 rx queues ix0: Ethernet address: [_MAC_XXXXXXXXXX] ix0: PCI Express Bus: Speed 5.0GT/s Width x4 ix0: eTrack 0x000161c1 PHY FW V65535 ix0: netmap queues/slots: TX 4/2048, RX 4/2048 ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xc000-0xc01f mem 0xf9000000-0xf907ffff,0xf9100000-0xf9103fff irq 44 at device 0.1 on pci4 ix1: Using 2048 TX descriptors and 2048 RX descriptors ix1: Using 4 RX queues 4 TX queues ix1: Using MSI-X interrupts with 5 vectors ix1: allocated for 4 queues ix1: allocated for 4 rx queues ix1: Ethernet address: [_MAC_XXXXXXXXXX] ix1: PCI Express Bus: Speed 5.0GT/s Width x4 ix1: eTrack 0x000161c1 PHY FW V65535 ix1: netmap queues/slots: TX 4/2048, RX 4/2048 pcib5: <ACPI PCI-PCI bridge> irq 43 at device 3.1 on pci0 pci5: <ACPI PCI bus> on pcib5 ix2: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xb020-0xb03f mem 0xf8e80000-0xf8efffff,0xf8f04000-0xf8f07fff irq 41 at device 0.0 on pci5 ix2: Using 2048 TX descriptors and 2048 RX descriptors ix2: Using 4 RX queues 4 TX queues ix2: Using MSI-X interrupts with 5 vectors ix2: allocated for 4 queues ix2: allocated for 4 rx queues ix2: Ethernet address: [_MAC_XXXXXXXXXX] ix2: PCI Express Bus: Speed 5.0GT/s Width x4 ix2: eTrack 0x000161c1 PHY FW V65535 ix2: netmap queues/slots: TX 4/2048, RX 4/2048 ix3: <Intel(R) X520 82599ES (SFI/SFP+)> port 0xb000-0xb01f mem 0xf8e00000-0xf8e7ffff,0xf8f00000-0xf8f03fff irq 45 at device 0.1 on pci5 ix3: Using 2048 TX descriptors and 2048 RX descriptors ix3: Using 4 RX queues 4 TX queues ix3: Using MSI-X interrupts with 5 vectors ix3: allocated for 4 queues ix3: allocated for 4 rx queues ix3: Ethernet address: [_MAC_XXXXXXXXXX] ix3: PCI Express Bus: Speed 5.0GT/s Width x4 ix3: eTrack 0x000161c1 PHY FW V65535 ix3: netmap queues/slots: TX 4/2048, RX 4/2048 pcib6: <ACPI PCI-PCI bridge> irq 43 at device 3.2 on pci0 pci6: <ACPI PCI bus> on pcib6 pci6: <serial bus> at device 0.0 (no driver attached) pcib7: <ACPI PCI-PCI bridge> irq 16 at device 17.0 on pci0 pci7: <ACPI PCI bus> on pcib7 isci0: <Intel(R) C600 Series Chipset SAS Controller (SATA mode)> port 0xa000-0xa0ff mem 0xf8c7c000-0xf8c7ffff,0xf8800000-0xf8bfffff irq 16 at device 0.0 on pci7 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Patsburg USB 2.0 controller> mem 0xfb823000-0xfb8233ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib8: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci9: <ACPI PCI bus> on pcib9 em0: <Intel(R) Gigabit CT 82574L> port 0x9000-0x901f mem 0xfb600000-0xfb61ffff,0xfb620000-0xfb623fff irq 18 at device 0.0 on pci9 em0: EEPROM V2.1-2 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci10: <ACPI PCI bus> on pcib10 em1: <Intel(R) Gigabit CT 82574L> port 0x8000-0x801f mem 0xfb500000-0xfb51ffff,0xfb520000-0xfb523fff irq 19 at device 0.0 on pci10 em1: EEPROM V2.1-2 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 2 RX queues 2 TX queues em1: Using MSI-X interrupts with 3 vectors em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: netmap queues/slots: TX 2/1024, RX 2/1024 ehci1: <Intel Patsburg USB 2.0 controller> mem 0xfb822000-0xfb8223ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib11 vgapci0: <VGA-compatible display> mem 0xf7000000-0xf7ffffff,0xfa000000-0xfa003fff,0xf9800000-0xf9ffffff irq 16 at device 4.0 on pci11 vgapci0: Boot video device isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Patsburg AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xfb821000-0xfb8217ff irq 18 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib12: <ACPI Host-PCI bridge> on acpi0 pci12: <ACPI PCI bus> on pcib12 pci12: <dasp, performance counters> at device 14.1 (no driver attached) pci12: <dasp, performance counters> at device 19.1 (no driver attached) pci12: <dasp, performance counters> at device 19.4 (no driver attached) pci12: <dasp, performance counters> at device 19.5 (no driver attached) acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0 uart2: console (115200,n,8,1) orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff,0xc9800-0xca7ff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1199999796 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0 on usbus1 uhub1 on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Trying to mount root from zfs:zroot/ROOT/default []... uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: CAM usbus0 usbus1 uhub2: 6 ports with 6 removable, self powered Root mount waiting for: CAM usbus0 usbus1 uhub3: 8 ports with 8 removable, self powered ugen0.3: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus0 ukbd0 on uhub2 ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 kbd2 at ukbd0 Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for: CAM mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xb SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for: CAM mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xc SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xd SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xe SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for:mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 CAM mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0xf SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x10 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x11 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for: CAM mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x12 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x13 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x14 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x15 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 Root mount waiting for: CAM mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 mps0: Error reading device 0x16 SATA PASSTHRU; iocstatus= 0x47 (probe0:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:19:0): CAM status: CCB request completed with an error (probe0:mps0:0:19:0): Retrying command, 3 more tries remain (probe1:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:23:0): CAM status: CCB request completed with an error (probe1:mps0:0:23:0): Retrying command, 3 more tries remain (probe2:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:29:0): CAM status: CCB request completed with an error (probe2:mps0:0:29:0): Retrying command, 3 more tries remain (probe3:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:26:0): CAM status: CCB request completed with an error (probe3:mps0:0:26:0): Retrying command, 3 more tries remain (probe4:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:24:0): CAM status: CCB request completed with an error (probe4:mps0:0:24:0): Retrying command, 3 more tries remain (probe5:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:25:0): CAM status: CCB request completed with an error (probe5:mps0:0:25:0): Retrying command, 3 more tries remain (probe6:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:43:0): CAM status: CCB request completed with an error (probe6:mps0:0:43:0): Retrying command, 3 more tries remain (probe7:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:35:0): CAM status: CCB request completed with an error (probe7:mps0:0:35:0): Retrying command, 3 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 3 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 3 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 3 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 3 more tries remain (probe0:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:19:0): CAM status: CCB request completed with an error (probe0:mps0:0:19:0): Retrying command, 2 more tries remain (probe1:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:23:0): CAM status: CCB request completed with an error (probe1:mps0:0:23:0): Retrying command, 2 more tries remain (probe2:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:29:0): CAM status: CCB request completed with an error (probe2:mps0:0:29:0): Retrying command, 2 more tries remain (probe3:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:26:0): CAM status: CCB request completed with an error (probe3:mps0:0:26:0): Retrying command, 2 more tries remain (probe4:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:24:0): CAM status: CCB request completed with an error (probe4:mps0:0:24:0): Retrying command, 2 more tries remain (probe5:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:25:0): CAM status: CCB request completed with an error (probe5:mps0:0:25:0): Retrying command, 2 more tries remain (probe6:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:43:0): CAM status: CCB request completed with an error (probe6:mps0:0:43:0): Retrying command, 2 more tries remain (probe7:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:35:0): CAM status: CCB request completed with an error (probe7:mps0:0:35:0): Retrying command, 2 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 2 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 2 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 2 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 2 more tries remain (probe0:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:19:0): CAM status: CCB request completed with an error (probe0:mps0:0:19:0): Retrying command, 1 more tries remain (probe1:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:23:0): CAM status: CCB request completed with an error (probe1:mps0:0:23:0): Retrying command, 1 more tries remain (probe2:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:29:0): CAM status: CCB request completed with an error (probe2:mps0:0:29:0): Retrying command, 1 more tries remain (probe3:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:26:0): CAM status: CCB request completed with an error (probe3:mps0:0:26:0): Retrying command, 1 more tries remain (probe4:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:24:0): CAM status: CCB request completed with an error (probe4:mps0:0:24:0): Retrying command, 1 more tries remain (probe5:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:25:0): CAM status: CCB request completed with an error (probe5:mps0:0:25:0): Retrying command, 1 more tries remain (probe6:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:43:0): CAM status: CCB request completed with an error (probe6:mps0:0:43:0): Retrying command, 1 more tries remain (probe7:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:35:0): CAM status: CCB request completed with an error (probe7:mps0:0:35:0): Retrying command, 1 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 1 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 1 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 1 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 1 more tries remain (probe0:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:19:0): CAM status: CCB request completed with an error (probe0:mps0:0:19:0): Retrying command, 0 more tries remain (probe1:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe1:mps0:0:23:0): CAM status: CCB request completed with an error (probe1:mps0:0:23:0): Retrying command, 0 more tries remain (probe2:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:29:0): CAM status: CCB request completed with an error (probe2:mps0:0:29:0): Retrying command, 0 more tries remain (probe3:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:26:0): CAM status: CCB request completed with an error (probe3:mps0:0:26:0): Retrying command, 0 more tries remain (probe4:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:24:0): CAM status: CCB request completed with an error (probe4:mps0:0:24:0): Retrying command, 0 more tries remain (probe5:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:25:0): CAM status: CCB request completed with an error (probe5:mps0:0:25:0): Retrying command, 0 more tries remain (probe6:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:43:0): CAM status: CCB request completed with an error (probe6:mps0:0:43:0): Retrying command, 0 more tries remain (probe7:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:35:0): CAM status: CCB request completed with an error (probe7:mps0:0:35:0): Retrying command, 0 more tries remain (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Retrying command, 0 more tries remain (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Retrying command, 0 more tries remain (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Retrying command, 0 more tries remain (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Retrying command, 0 more tries remain (probe0:mps0:0:19:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:mps0:0:19:0): CAM status: CCB request completed with an error (probe0:mps0:0:19:0): Error 5, Retries exhausted Root mount waiting for:(probe1:mps0:0:23:0): INQUIRY. CDB: 12 00 00 00 24 00 CAM (probe1:mps0:0:23:0): CAM status: CCB request completed with an error (probe1:mps0:0:23:0): Error 5, Retries exhausted (probe2:mps0:0:29:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe2:mps0:0:29:0): CAM status: CCB request completed with an error (probe2:mps0:0:29:0): Error 5, Retries exhausted (probe3:mps0:0:26:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe3:mps0:0:26:0): CAM status: CCB request completed with an error (probe3:mps0:0:26:0): Error 5, Retries exhausted (probe4:mps0:0:24:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe4:mps0:0:24:0): CAM status: CCB request completed with an error (probe4:mps0:0:24:0): Error 5, Retries exhausted (probe5:mps0:0:25:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe5:mps0:0:25:0): CAM status: CCB request completed with an error (probe5:mps0:0:25:0): Error 5, Retries exhausted (probe6:mps0:0:43:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe6:mps0:0:43:0): CAM status: CCB request completed with an error (probe6:mps0:0:43:0): Error 5, Retries exhausted (probe7:mps0:0:35:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:mps0:0:35:0): CAM status: CCB request completed with an error (probe7:mps0:0:35:0): Error 5, Retries exhausted (probe8:mps0:0:34:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe8:mps0:0:34:0): CAM status: CCB request completed with an error (probe8:mps0:0:34:0): Error 5, Retries exhausted (probe9:mps0:0:33:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe9:mps0:0:33:0): CAM status: CCB request completed with an error (probe9:mps0:0:33:0): Error 5, Retries exhausted (probe10:mps0:0:32:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe10:mps0:0:32:0): CAM status: CCB request completed with an error (probe10:mps0:0:32:0): Error 5, Retries exhausted (probe11:mps0:0:31:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe11:mps0:0:31:0): CAM status: CCB request completed with an error (probe11:mps0:0:31:0): Error 5, Retries exhausted ada0 at ahcich0 bus 0 scbus3 target 0 lun 0 ada0: <INTEL SSDSC2CW120A3 400i> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich1 bus 0 scbus4 target 0 lun 0 ada1: <INTEL SSDSC2CW120A3 400i> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 114473MB (234441648 512 byte sectors) ses0 at mps0 bus 0 scbus0 target 10 lun 0 ses0: <LSI SAS2X36 0e0b> Fixed Enclosure Services SPC-3 SCSI device ses0: Serial Number ses0: 600.000MB/s transfers ses0: Command Queueing enabled ses0: SES Device ses1 at mps1 bus 0 scbus1 target 10 lun 0 ses1: <LSI SAS2X36 0e0b> Fixed Enclosure Services SPC-3 SCSI device ses1: Serial Number ses1: 600.000MB/s transfers ses1: Command Queueing enabled ses1: SES Device cd0 at ahcich2 bus 0 scbus5 target 0 lun 0 cd0: <TEAC DV-28S-Y 1.4A> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ses2 at ahciem0 bus 0 scbus9 target 0 lun 0 ses2: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses2: SEMB SES Device da3 at mps1 bus 0 scbus1 target 25 lun 0 da3: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da3: [_SERIAL_NUMBER_XXXXXXXXXXXX] da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 1907729MB (3907029168 512 byte sectors) da0 at mps1 bus 0 scbus1 target 19 lun 0 da0: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXX] da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 1907729MB (3907029168 512 byte sectors) da4 at mps1 bus 0 scbus1 target 26 lun 0 da4: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device da4: [_SERIAL_NUMBER_XXXXXXXXXXXX] da4: 300.000MB/s transfers da4: Command Queueing enabled da4: 1907729MB (3907029168 512 byte sectors) da2 at mps1 bus 0 scbus1 target 24 lun 0 da2: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da2: [_SERIAL_NUMBER_XXXXXXXXXXXX] da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 1907729MB (3907029168 512 byte sectors) da1 at mps1 bus 0 scbus1 target 23 lun 0 da1: <ATA WDC WD2003FYYS-0 1D01> Fixed Direct Access SPC-4 SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXXXXX] da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 1907729MB (3907029168 512 byte sectors) da5 at mps1 bus 0 scbus1 target 29 lun 0 da5: <ATA WDC WD2003FYYS-0 1D02> Fixed Direct Access SPC-4 SCSI device da5: [_SERIAL_NUMBER_XXXXXXXXXXXX] da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 1907729MB (3907029168 512 byte sectors) da6 at mps1 bus 0 scbus1 target 31 lun 0 da6: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da6: [_SERIAL_NUMBER_XXXXXXXXX] da6: 600.000MB/s transfers da6: Command Queueing enabled da6: 15259648MB (31251759104 512 byte sectors) da7 at mps1 bus 0 scbus1 target 32 lun 0 da7: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da7: [_SERIAL_NUMBER_XXXXXXXXX] da7: 600.000MB/s transfers da7: Command Queueing enabled da7: 15259648MB (31251759104 512 byte sectors) da9 at mps1 bus 0 scbus1 target 34 lun 0 da9: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da9: [_SERIAL_NUMBER_XXXXXXXXX] da9: 600.000MB/s transfers da9: Command Queueing enabled da9: 15259648MB (31251759104 512 byte sectors) da10 at mps1 bus 0 scbus1 target 35 lun 0 da10: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da10: [_SERIAL_NUMBER_XXXXXXXXX] da10: 600.000MB/s transfers da10: Command Queueing enabled da10: 15259648MB (31251759104 512 byte sectors) da8 at mps1 bus 0 scbus1 target 33 lun 0 da8: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da8: [_SERIAL_NUMBER_XXXXXXXXX] da8: 600.000MB/s transfers da8: Command Queueing enabled da8: 15259648MB (31251759104 512 byte sectors) da11 at mps1 bus 0 scbus1 target 43 lun 0 da11: <ATA TOSHIBA MG08ACA1 0101> Fixed Direct Access SPC-4 SCSI device da11: [_SERIAL_NUMBER_XXXXXXXXX] da11: 600.000MB/s transfers da11: Command Queueing enabled da11: 15259648MB (31251759104 512 byte sectors) ses1: da0,pass2 in 'Slot 01', SAS Slot: 1 phys at slot 0 ses2: ada0,pass14 in 'Slot 00', SATA Slot: scbus3 target 0 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a760c ses1: da1,pass3 in 'Slot 06', SAS Slot: 1 phys at slot 5 ses2: ada1,pass15 in 'Slot 01', SATA Slot: scbus4 target 0 ses1: phy 0: SATA device ses2: pass16,cd0 in 'Slot 02', SATA Slot: scbus5 target 0 ses1: phy 0: parent 50030480005a763f addr 50030480005a7611 ses1: da5,pass7 in 'Slot 09', SAS Slot: 1 phys at slot 8 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7614 ses1: da4,pass6 in 'Slot 10', SAS Slot: 1 phys at slot 9 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7615 ses1: da2,pass4 in 'Slot 11', SAS Slot: 1 phys at slot 10 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7616 ses1: da3,pass5 in 'Slot 12', SAS Slot: 1 phys at slot 11 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7617 ses1: da11,pass13 in 'Slot 13', SAS Slot: 1 phys at slot 12 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7618 ses1: da10,pass12 in 'Slot 14', SAS Slot: 1 phys at slot 13 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a7619 ses1: da9,pass11 in 'Slot 15', SAS Slot: 1 phys at slot 14 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761a ses1: da8,pass10 in 'Slot 16', SAS Slot: 1 phys at slot 15 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761b ses1: da7,pass9 in 'Slot 17', SAS Slot: 1 phys at slot 16 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761c ses1: da6,pass8 in 'Slot 18', SAS Slot: 1 phys at slot 17 ses1: phy 0: SATA device ses1: phy 0: parent 50030480005a763f addr 50030480005a761d Dual Console: Serial Primary, Video Secondary ioat0: <SNB IOAT Ch0> mem 0xfb81c000-0xfb81ffff irq 31 at device 4.0 on pci0 ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat1: <SNB IOAT Ch1> mem 0xfb818000-0xfb81bfff irq 39 at device 4.1 on pci0 ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat2: <SNB IOAT Ch2> mem 0xfb814000-0xfb817fff irq 31 at device 4.2 on pci0 ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat3: <SNB IOAT Ch3> mem 0xfb810000-0xfb813fff irq 39 at device 4.3 on pci0 ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat4: <SNB IOAT Ch4> mem 0xfb80c000-0xfb80ffff irq 31 at device 4.4 on pci0 ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat5: <SNB IOAT Ch5> mem 0xfb808000-0xfb80bfff irq 39 at device 4.5 on pci0 ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat6: <SNB IOAT Ch6> mem 0xfb804000-0xfb807fff irq 31 at device 4.6 on pci0 ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ioat7: <SNB IOAT Ch7> mem 0xfb800000-0xfb803fff irq 39 at device 4.7 on pci0 ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break> ichsmb0: <Intel Patsburg SMBus controller> port 0x1180-0x119f mem 0xfb820000-0xfb8200ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 mlx4_core0: <mlx4_core> mem 0xfb700000-0xfb7fffff,0xf8000000-0xf87fffff irq 42 at device 0.0 on pci6 mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021) mlx4_core: Initializing 0000:08:00.0 mlx4_core0: Unable to determine PCI device chain minimum BW acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device lo0: link state changed to UP ix1: link state changed to UP ix3: link state changed to UP ums0 on uhub2 ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0