Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-07-19 17:54:35
From: Justin Yang
Description: NetBSD on nanopi r2s plus (using r2s rksd_loader.img though)
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0 (GENERIC64) #0: Thu Mar 28 08:33:33 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64 [ 1.000000] total memory = 1003 MB [ 1.000000] avail memory = 966 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: FriendlyElec NanoPi R2S [ 1.000000] cpus0 at simplebus0 [ 1.000000] psci0 at simplebus0: PSCI 1.1 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0 [ 1.000000] cpu0: package 0, core 0, smt 0 [ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu0: L2 256KB/64B 16-way (256 set) PIPT Unified cache [ 1.000000] cpu0: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu0: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpufreqdt0 at cpu0 [ 1.000000] cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1 [ 1.000000] cpu1: package 0, core 1, smt 0 [ 1.000000] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu1: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu1: L2 256KB/64B 16-way (256 set) PIPT Unified cache [ 1.000000] cpu1: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu1: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpufreqdt1 at cpu1 [ 1.000000] cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2 [ 1.000000] cpu2: package 0, core 2, smt 0 [ 1.000000] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu2: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu2: L2 256KB/64B 16-way (256 set) PIPT Unified cache [ 1.000000] cpu2: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu2: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpufreqdt2 at cpu2 [ 1.000000] cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3 [ 1.000000] cpu3: package 0, core 3, smt 0 [ 1.000000] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1 [ 1.000000] cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache [ 1.000000] cpu3: L1 32KB/64B 4-way (128 set) PIPT Data cache [ 1.000000] cpu3: L2 256KB/64B 16-way (256 set) PIPT Unified cache [ 1.000000] cpu3: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu3: auxID=0x11120, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpufreqdt3 at cpu3 [ 1.000000] gic0 at simplebus0: GIC [ 1.000000] armgic0 at gic0: Generic Interrupt Controller, 160 sources (149 valid) [ 1.000000] armgic0: 16 Priorities, 128 SPIs, 6 PPIs, 15 SGIs [ 1.000000] syscon0 at simplebus0: System Controller Registers [ 1.000000] fclock0 at simplebus0: 24000000 Hz fixed clock (xin24m) [ 1.000000] syscon1 at simplebus0: System Controller Registers [ 1.000000] fclock1 at simplebus0: 125000000 Hz fixed clock (gmac_clkin) [ 1.000000] rkcru0 at simplebus0: RK3328 CRU [ 1.000000] gtmr0 at simplebus0: Generic Timer [ 1.000000] gtmr0: interrupting on GIC irq 27 [ 1.000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500 [ 1.000004] rkiomux0 at simplebus0: RK3328 IOMUX control [ 1.000004] rkgpio0 at rkiomux0: GPIO (gpio0@ff210000) [ 1.000004] gpio0 at rkgpio0: 32 pins [ 1.000004] rkgpio1 at rkiomux0: GPIO (gpio1@ff220000) [ 1.000004] gpio1 at rkgpio1: 32 pins [ 1.000004] rkgpio2 at rkiomux0: GPIO (gpio2@ff230000) [ 1.000004] gpio2 at rkgpio2: 32 pins [ 1.000004] rkgpio3 at rkiomux0: GPIO (gpio3@ff240000) [ 1.000004] gpio3 at rkgpio3: 32 pins [ 1.000004] rkiic0 at simplebus0: Rockchip I2C (100000 Hz) [ 1.000004] iic0 at rkiic0: I2C bus [ 1.000004] rkpmic0 at iic0 addr 0x18: RK805 Power Management and Real Time Clock IC [ 1.000004] rkreg0 at rkpmic0: vdd_log [ 1.000004] rkreg1 at rkpmic0: vdd_arm [ 1.000004] rkreg2 at rkpmic0: vcc_ddr [ 1.000004] rkreg3 at rkpmic0: vcc_io_33 [ 1.000004] rkreg4 at rkpmic0: vcc_18 [ 1.000004] rkreg5 at rkpmic0: vcc18_emmc [ 1.000004] rkreg6 at rkpmic0: vdd_10 [ 1.000004] gregulator0 at simplebus0: vcc_io_sdio [ 1.000004] fregulator0 at simplebus0: vdd_5v [ 1.000004] fregulator1 at simplebus0: vcc_sd [ 1.000004] com0 at simplebus0: DesignWare APB UART, 64-byte FIFO [ 1.000004] com0: console [ 1.000004] com0: interrupting on GIC irq 89 [ 1.000004] fregulator2 at simplebus0: vdd_5v_lan [ 1.000004] rkusb0 at syscon1: USB2 PHY [ 1.000004] rkusbphy0 at rkusb0: USB2 OTG port [ 1.000004] rkusbphy1 at rkusb0: USB2 host port [ 1.000004] /opp_table0 at simplebus0 not configured [ 1.000004] /dmac@ff1f0000 at simplebus0 not configured [ 1.000004] rktsadc0 at simplebus0: RK3328 Temperature Sensor ADC [ 1.000004] rktsadc0: interrupting on GIC irq 90 [ 1.000004] /iommu@ff350800 at simplebus0 not configured [ 1.000004] /syscon@ff100000/power-controller at syscon0 not configured [ 1.000004] /efuse@ff260000 at simplebus0 not configured [ 1.000004] awge0 at simplebus0: GMAC [ 1.000004] awge0: Core version: 00001035 [ 1.000004] awge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000004] awge0: HW feature mask: d0f17 [ 1.000004] rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media interface [ 1.000004] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000004] rgephy1 at awge0 phy 1: RTL8211F 1000BASE-T media interface [ 1.000004] rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.000004] awge0: interrupting on GIC irq 56 [ 1.000004] /syscon@ff100000/io-domains at syscon0 not configured [ 1.000004] /syscon@ff100000/gpio at syscon0 not configured [ 1.000004] dwcwdt0 at simplebus0autoconfiguration error: : couldn't enable clock [ 1.000004] /pwm@ff1b0020 at simplebus0 not configured [ 1.000004] /gpu@ff300000 at simplebus0 not configured [ 1.000004] /video-codec@ff350000 at simplebus0 not configured [ 1.000004] dwcmmc0 at simplebus0: DesignWare SD/MMC [ 1.000004] dwcmmc0: interrupting on GIC irq 44 [ 1.000004] dwctwo0 at simplebus0: DesignWare USB2 OTG [ 1.000004] dwctwo0: interrupting on GIC irq 55 [ 1.000004] ehci0 at simplebus0: EHCI [ 1.000004] ehci0: interrupting on GIC irq 48 [ 1.000004] ehci0: EHCI version 1.0 [ 1.000004] ehci0: 1 companion controller, 1 port [ 1.000004] ehci0: Using DMA subregion for control data structures [ 1.000004] usb0 at ehci0: USB revision 2.0 [ 1.000004] ohci0 at simplebus0: OHCI [ 1.000004] ohci0: interrupting on GIC irq 49 [ 1.000004] ohci0: OHCI version 1.0 [ 1.000004] usb1 at ohci0: USB revision 1.0 [ 1.000004] xhci0 at simplebus0: DesignWare USB3 XHCI (rev. 3.00a) [ 1.000004] xhci0: interrupting on GIC irq 99 [ 1.000004] xhci0: xHCI version 1.10 [ 1.000004] usb2 at xhci0: USB revision 3.0 [ 1.000004] usb3 at xhci0: USB revision 2.0 [ 1.000004] gpioleds0 at simplebus0: nanopi-r2s:green:lan nanopi-r2s:red:sys nanopi-r2s:green:wan [ 1.000004] rkv1crypto0 at simplebus0: Crypto v1 [ 1.000004] entropy: ready [ 1.000004] armpmu0 at simplebus0: Performance Monitor Unit [ 1.000004] gpiokeys0 at simplebus0: reset [ 1.000004] /syscon@ff100000/reboot-mode at syscon0 not configured [ 1.000004] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.214415] cpufreqdt0: rate: 1296.000 MHz, 1300000 uV [ 1.214415] sdmmc0 at dwcmmc0 [ 1.214415] uhub0 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.214415] uhub0: 1 port with 1 removable, self powered [ 1.214415] uhub1 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.224421] uhub1: 1 port with 1 removable, self powered [ 1.224421] armpmu0: interrupting on GIC irq 132 [ 1.224421] armpmu0: interrupting on GIC irq 133 [ 1.224421] armpmu0: interrupting on GIC irq 134 [ 1.224421] armpmu0: interrupting on GIC irq 135 [ 1.234420] uhub2 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.234420] uhub2: 1 port with 1 removable, self powered [ 1.234420] uhub3 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.234420] uhub3: 1 port with 1 removable, self powered [ 1.234420] IPsec: Initialized Security Association Processing. [ 1.254416] dwctwo0: Core Release: 3.10a (snpsid=4f54310a) [ 1.254416] usb4 at dwctwo0: USB revision 2.0 [ 1.274416] uhub4 at usb4: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.274416] uhub4: 1 port with 1 removable, self powered [ 1.354418] sdmmc0: SD card status: 4-bit, C10, U1, A1 [ 1.354418] ld0 at sdmmc0: <0x03:0x5344:SD64G:0x85:0xe2a6dac6:0x159> [ 1.354418] ld0: 60906 MB, 7764 cyl, 255 head, 63 sec, 512 bytes/sect x 124735488 sectors [ 1.354418] ld0: GPT GUID: 987939cb-c08e-4614-88c3-6749b5d3104f [ 1.354418] dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos [ 1.354418] dk1 at ld0: "netbsd-root", 124534784 blocks at 196608, type: ffs [ 1.354418] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.664419] ure0 at uhub0 port 1 [ 1.664419] ure0: Realtek (0x0bda) USB 10/100/1000 LAN (0x8153), rev 3.00/31.00, addr 1 [ 1.664419] ure0: RTL8153 unknown ver 6010 [ 1.724420] rgephy2 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0 [ 1.724420] rgephy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.724420] ure0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.744420] swwdog0: software watchdog initialized [ 1.744420] WARNING: 1 error while detecting hardware; check system log. [ 1.744420] boot device: dk1 [ 1.744420] root on dk1 [ 1.754424] root file system type: ffs [ 1.764421] kern.module.path=/stand/evbarm/10.0/modules [ 1.764421] WARNING: preposterous TOD clock time [ 1.764421] WARNING: using filesystem time [ 1.771377] WARNING: CHECK AND RESET THE DATE!