Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2024-07-24 11:32:03
From: skrll
Description: NetBSD 10 on RPI5

  \\-__,------,___.
   \\        __,---`  NetBSD/evbarm efiboot (arm64)
    \\       `---,_.  Revision 2.13 (Sat Jul 20 16:11:27 UTC 2024)
     \\-,_____,.---`
      \\
       \\
        \\

Press return to boot now, any other key for boot prompt
booting netbsd - starting in 0 seconds.     
7614624+3392208+4187872+1767808 [598179+952800+711155]=0x13d6ff0
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 10.0_STABLE (GENERIC64) #0: Sat Jul 20 16:11:27 UTC 2024
[   1.0000000]  [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
[   1.0000000] total memory = 8150 MB
[   1.0000000] avail memory = 7856 MB
[   1.0000000] entropy: ready
[   1.0000000] armfdt0 (root)
[   1.0000000] armfdt0: using EFI runtime services for RTC
[   1.0000000] simplebus0 at armfdt0: Raspberry Pi Foundation Raspberry Pi 5 Model B
[   1.0000000] simplebus1 at simplebus0
[   1.0000000] acpifdt0 at simplebus0
[   1.0000000] acpifdt0: SMBIOS rev. 3.3.0 @ 0x37cd0000
[   1.0000000] ACPI: RSDP 0x0000000037E70018 000024 (v02 RPIFDN)
[   1.0000000] ACPI: XSDT 0x0000000037E7FE98 000064 (v01 RPIFDN RPI5     00000200      01000013)
[   1.0000000] ACPI: FACP 0x0000000037E7FB98 000114 (v06 RPIFDN RPI5     00000200 EDK2 00000300)
[   1.0000000] ACPI: DSDT 0x0000000037E77518 0014DD (v02 RPIFDN RPI5     00000002 INTL 20200925)
[   1.0000000] ACPI: BGRT 0x0000000037E7FF98 000038 (v01 INTEL  EDK2     00000002      01000013)
[   1.0000000] ACPI: DBG2 0x0000000037E7FA98 000061 (v00 RPIFDN RPI5     00000200 EDK2 00000300)
[   1.0000000] ACPI: GTDT 0x0000000037E7FD18 000068 (v03 RPIFDN RPI5     00000200 EDK2 00000300)
[   1.0000000] ACPI: APIC 0x0000000037E7E998 000184 (v05 RPIFDN RPI5     00000200 EDK2 00000300)
[   1.0000000] ACPI:      0x0000000037E7F698 00005C (v01 RPIFDN RPI5     00000200 EDK2 00000300)
[   1.0000000] ACPI: PPTT 0x0000000037E7F798 000130 (v02 RPIFDN RPI5     00000200 EDK2 00000300)
[   1.0000000] ACPI: SPCR 0x0000000037E7FA18 000050 (v02 RPIFDN RPI5     00000200 EDK2 00000300)
[   1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[   1.0000000] acpi0 at acpifdt0: Intel ACPICA 20221020
[   1.0000000] acpi0: SMCCC: PCI impl. version 1.0
[   1.0000000] acpi0: SMCCC: segment 1, bus 0-255
[   1.0000000] cpu0 at acpi0: Arm Cortex-A76 r4p1 (v8.2-A+), id 0x0
[   1.0000000] cpu0: package 0, core 0, smt 0
[   1.0000000] cpu1 at acpi0: Arm Cortex-A76 r4p1 (v8.2-A+), id 0x100
[   1.0000000] cpu1: package 0, core 1, smt 0
[   1.0000000] cpu2 at acpi0: Arm Cortex-A76 r4p1 (v8.2-A+), id 0x200
[   1.0000000] cpu2: package 0, core 2, smt 0
[   1.0000000] cpu3 at acpi0: Arm Cortex-A76 r4p1 (v8.2-A+), id 0x300
[   1.0000000] cpu3: package 0, core 3, smt 0
[   1.0000000] gic0 at acpi0: GIC
[   1.0000000] armgic0 at gic0: Generic Interrupt Controller, 320 sources (311 valid)
[   1.0000000] armgic0: 16 Priorities, 288 SPIs, 7 PPIs, 16 SGIs
[   1.0000000] gtmr0 at acpi0: irq 27
[   1.0000000] armgtmr0 at gtmr0: Generic Timer (54000 kHz, virtual)
[   1.0000040] CPU0 (ACPI0007) at acpi0 not configured
[   1.0000040] CPU1 (ACPI0007) at acpi0 not configured
[   1.0000040] CPU2 (ACPI0007) at acpi0 not configured
[   1.0000040] CPU3 (ACPI0007) at acpi0 not configured
[   1.0000040] plcom0 at acpi0 (URT0, ARMH0011-0): mem 0x107d001000-0x107d0011ff irq 153
[   1.0000040] plcom0: console
[   1.0000040] RES0 (AMZN0001) at acpi0 not configured
[   1.0000040] acpipchb0 at acpi0 (PCI1, PNP0A08-1): PCI Express Host Bridge
[   1.0000040] pci0 at acpipchb0 bus 0
[   1.0000040] ppb0 at pci0 dev 0 function 0: vendor 14e4 product 2712 (rev. 0x21)
[   1.0000040] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
[   1.0000040] pci1 at ppb0 bus 1
[   1.0000040] RES0 (AMZN0001) at acpi0 not configured
[   1.0000040] xhci0 at acpi0 (XHC0, PNP0D10-0): mem 0x1f00200000-0x1f002fffff irq 261
[   1.0000040] usb0 at xhci0: USB revision 3.0
[   1.0000040] usb1 at xhci0: USB revision 2.0
[   1.0000040] xhci1 at acpi0 (XHC1, PNP0D10-1): mem 0x1f00300000-0x1f003fffff irq 261
[   1.0000040] usb2 at xhci1: USB revision 3.0
[   1.0000040] usb3 at xhci1: USB revision 2.0
[   1.0000040] sdhc0 at acpi0 (SDC0, BRCM5D12-0): mem 0x1000fff000-0x1000fff25f irq 305
[   1.0000040] sdhc0: SDHC 3.0, rev 16, 32-bit ADMA2, 200000 kHz, HS 1.8V 3.3V, re-tuning mode 1 (16s timer), 2048 byte blocks
[   1.0000040] sdmmc0 at sdhc0 slot 0
[   1.0000040] sdhc1 at acpi0 (SDC1, BRCM5D12-1): mem 0x1001100000-0x100110025f irq 306
[   1.0000040] sdhc1: SDHC 3.0, rev 16, 32-bit ADMA2, 200000 kHz, embedded slot, HS DDR50 1.8V 3.3V, re-tuning mode 1 (16s timer), 2048 byte blocks
[   1.0000040] sdmmc1 at sdhc1 slot 0
[   1.0000040] genfb0 at simplebus1: Simple Framebuffer (1920x1080 32-bpp @ 0x3f400000)
[   1.0000040] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[   1.2875300] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[   1.2875300] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[   1.2975309] uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[   1.3075310] uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[   1.3375324] cpu0: PMU interrupting on irq 48
[   1.3375324] cpu1: PMU interrupting on irq 49
[   1.3375324] cpu2: PMU interrupting on irq 50
[   1.3475323] cpu3: PMU interrupting on irq 51
[   1.8175369] axen0 at uhub3 port 2
[   1.8175369] axen0: ASIX Elec. Corp. (0x0b95) AX88179 (0x1790), rev 2.10/1.00, addr 1
[   1.8275371] umass0 at uhub1 port 1 configuration 1 interface 0
[   1.8275371] umass0: SanDisk (0x0781) Cruzer Force (0x557d), rev 2.00/1.00, addr 1
[   1.8375371] scsibus0 at umass0: 2 targets, 1 lun per target
[   1.8475373] sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Force, 1.00> disk removable
[   1.8575373] sd0: 29340 MB, 59611 cyl, 16 head, 63 sec, 512 bytes/sect x 60088320 sectors
[   1.8675375] dk0 at sd0: "EFI", 163840 blocks at 32768, type: msdos
[   1.8675375] dk1 at sd0: "netbsd-root", 59883520 blocks at 196608, type: ffs
[   2.2775419] axen0: AX88179
[   2.2775419] rgephy0 at axen0 phy 3: RTL8211E 1000BASE-T media interface
[   2.2975422] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[   2.3075424] axen0: Ethernet address [_MAC_XXXXXXXXXX]
[   2.3375426] uhidev0 at uhub1 port 2 configuration 1 interface 0
[   2.3375426] uhidev0: vendor 04f3 (0x04f3) product 0103 (0x0103), rev 1.10/1.07, addr 2, iclass 3/1
[   2.3475428] ukbd0 at uhidev0
[   2.3575429] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[   2.3575429] uhidev1 at uhub1 port 2 configuration 1 interface 1
[   2.3675437] uhidev1: vendor 04f3 (0x04f3) product 0103 (0x0103), rev 1.10/1.07, addr 2, iclass 3/0
[   2.3775436] uhidev1: 2 report ids
[   2.3775436] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
[   2.3875434] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
[   4.4775667] sdmmc1: couldn't send I/O OCR
[   4.4875668] sdmmc1: couldn't enable card: 60
[   7.6376017] sdmmc1: couldn't send I/O OCR
[   7.6476018] sdmmc1: couldn't enable card: 60
[  10.4976336] sdmmc0: couldn't enable card: 60
[  10.5076336] swwdog0: software watchdog initialized
[  10.5176340] WARNING: 5 errors while detecting hardware; check system log.
[  10.5276339] boot device: dk1
[  10.5276339] root on dk1
[  10.5376340] root file system type: ffs
[  10.5476341] kern.module.path=/stand/evbarm/10.0/modules