Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-08 02:34:52
From: JE3KMZ
Description: FreeBSD/amd64 on HP ProLiant ML110 G7
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.3-RELEASE-p5 GENERIC amd64
FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) CPU G840 @ 2.80GHz (2793.84-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8241938432 (7860 MB)
CPU microcode: updated from 0x28 to 0x2f
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20201113/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20201113/tbfadt-850)
ioapic0: MADT APIC ID 8 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e
smbios0: Version: 2.6, BCD Revision: 2.6
aesni0: No AES or SHA support.
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
acpi0: _OSC failed: AE_BUFFER_OVERFLOW
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfacc0000-0xfacc03ff irq 21 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) Gigabit CT 82574L> port 0x4000-0x401f mem 0xfbde0000-0xfbdfffff,0xfbdd0000-0xfbdd3fff irq 16 at device 0.0 on pci4
em0: EEPROM V2.1-2
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using 2 RX queues 2 TX queues
em0: Using MSI-X interrupts with 3 vectors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
em1: <Intel(R) Gigabit CT 82574L> port 0x5000-0x501f mem 0xfbee0000-0xfbefffff,0xfbed0000-0xfbed3fff irq 17 at device 0.0 on pci5
em1: EEPROM V2.1-0
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using 2 RX queues 2 TX queues
em1: Using MSI-X interrupts with 3 vectors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib6: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci6: <ACPI PCI bus> on pcib6
3ware device driver for 9000 series storage controllers, version:[_IP_XXXXXX]
twa0: <3ware 9000 series Storage Controller> port 0x6000-0x60ff mem 0xf8000000-0xf9ffffff,0xfbff0000-0xfbff0fff irq 18 at device 0.0 on pci6
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X[_IP_XXXXXX], BIOS BE9X[_IP_XXXXXX]
twa0: Deprecated code (to be removed in FreeBSD 14): twa(4) removed
pcib7: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> mem 0xf7000000-0xf7ffffff,0xfbce0000-0xfbce3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci7
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x2000-0x201f irq 16 at device 0.4 on pci7
usbus1 on uhci0
usbus1: 12Mbps Full Speed USB v1.0
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xfacb0000-0xfacb03ff irq 20 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
pcib8: <PCI-PCI bridge> at device 30.0 on pci0
pci8: <PCI bus> on pcib8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_tz0: <Thermal Zone> on acpi0
ipmi0: <IPMI System Interface> port 0xca2-0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model Generic PS/2 mouse, device ID 0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff pnpid ORM0000 on isa0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 269700001c00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 269700001c00
device_attach: est1 attach returned 6
Timecounter "TSC-low" frequency 1396826782 Hz quality 1000
Timecounters tick every 1.000 msec
ipmi0: IPMI device rev. 1, firmware rev. 1.26, version 2.0, device support mask 0xf
ipmi0: Number of channels 0
ipmi0: Attached watchdog
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <HP UHCI root HUB> at usbus1
uhub0 on usbus2
uhub1 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub2 on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Trying to mount root from ufs:/dev/da0p3 [rw]...
da0 at twa0 bus 0 scbus0 target 0 lun 0
da0: <AMCC 9650SE-2LP DISK 4.10> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 100.000MB/s transfers
da0: 953664MB (1953103872 512 byte sectors)
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen1.2: <HP Virtual Keyboard> at usbus1
ukbd0 on uhub1
ukbd0: <Virtual Keyboard > on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0 usbus2
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub4 on uhub2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0 usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen0.3: <vendor 0x0557 product 0x8021> at usbus0
uhub5 on uhub4
uhub5: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 3> on usbus0
Root mount waiting for: usbus0
uhub5: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x099a USB Keyboard> at usbus0
ukbd1 on uhub5
ukbd1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0
kbd3 at ukbd1
CPU: Intel(R) Pentium(R) CPU G840 @ 2.80GHz (2793.65-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
tap0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
bridge0: link state changed to UP
em0: promiscuous mode enabled
tap0: promiscuous mode enabled
bridge0: link state changed to DOWN
em0: link state changed to UP
bridge0: link state changed to UP
em1: link state changed to UP
ums0 on uhub1
ums0: <Virtual Mouse> on usbus1
uhid0 on uhub5
uhid0: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0
ums1 on uhub5
ums1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0
ums1: 5 buttons and [XYZ] coordinates ID=0
ums2 on uhub5
ums2: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/0.90, addr 4> on usbus0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled