Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-08 03:01:25
From: JE3KMZ
Description: FreeBSD/i386 on AOpen
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.1-RELEASE-p3 GENERIC i386
FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9)
WARNING: 32-bit kernels are deprecated and may be removed in FreeBSD 15.0.
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.07-MHz 686-class CPU)
Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
TSC: P-state invariant
real memory = 3221225472 (3072 MB)
avail memory = 3140153344 (2994 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <AOpen AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 hardware threads
random: unblocking device.
ioapic0: MADT APIC ID 2 != hw id 0
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf0be0-0xf0bfe
smbios0: Version: 2.3, BCD Revision: 2.3
aesni0: No AES or SHA support.
acpi0: <AOpen AWRDACPI>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe400-0xe407 mem 0xe8000000-0xefffffff,0xf8400000-0xf847ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82865G (865G GMCH) SVGA controller> on vgapci0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 15.0.
agp0: aperture size is 128M, detected 892k stolen memory
vgapci0: Boot video device
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe100-0xe11f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe200-0xe21f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xe300-0xe31f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xf8480000-0xf84803ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf5000000-0xf50000ff irq 22 at device 7.0 on pci1
re0: Chip rev. 0x04000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
vgapci1: <VGA-compatible display> mem 0xf0000000-0xf3ffffff irq 20 at device 11.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 18 at device 31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x5000-0x501f irq 17 at device 31.3 on pci0
pcm0: <Intel ICH5 (82801EB)> port 0xeb00-0xebff,0xec00-0xec3f mem 0xf8481000-0xf84811ff,0xf8482000-0xf84820ff irq 17 at device 31.5 on pci0
pcm0: primary codec not ready!
pcm0: <Avance Logic ALC655 AC97 Codec>
acpi_tz0: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
ppc0: parallel port not found.
Timecounter "TSC-low" frequency 1596001528 Hz quality 1000
Timecounters tick every 1.000 msec
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
ugen4.1: <Intel EHCI root HUB> at usbus4
uhub0 on usbus4
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
acpi_tz0: failed to set new freq, disabling passive cooling
Trying to mount root from ufs:/dev/gpt/rootfs [rw]...
WARNING: 32-bit kernels are deprecated and may be removed in FreeBSD 15.0.
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub1 on usbus3
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2 on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub3 on usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub4 on usbus1
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub4: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <ST3250312AS HP63> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors)
Root mount waiting for: usbus4 ada
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x0557 product 0x8021> at usbus0
uhub5 on uhub3
uhub5: <vendor 0x0557 product 0x8021, class 9/0, rev 1.10/1.00, addr 2> on usbus0
uhub5: 4 ports with 4 removable, self powered
ugen0.3: <ATEN International Co. Ltd CS1708A V1.6.151> at usbus0
ukbd0 on uhub5
ukbd0: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd2 at ukbd0
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
Successfully added WC MTRR for [0xe8000000-0xefffffff]
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
[drm] Got stolen memory base 0x0, size 0x0
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
drmn0: [drm] Initialized overlay support.
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
[drm] Initialized i915 1.6.0 20200917 for drmn0 on minor 0
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=900 width=1600 depth=32
pbase=0xe8009000 vbase=0x0
name=drmn0 flags=0x0 stride=6400 bpp=32
end FB_INFO
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.00-MHz 686-class CPU)
Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
TSC: P-state invariant
re0: link state changed to UP
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
uhid0 on uhub5
uhid0: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0 on uhub5
ums0: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=0
ums1 on uhub5
ums1: <ATEN International Co. Ltd CS1708A V1.6.151, class 0/0, rev 1.10/1.00, addr 3> on usbus0
ums1: error reading report description
device_attach: ums1 attach returned 12