Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-08 08:18:59
From: Lena
Description: A home workstation, ASUS M2NPV-MX motherboard with builtin Nvidia GeForce 6150 video chip.
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.3-RELEASE-p5 GENERIC amd64 FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) CPU: AMD Athlon(tm) 64 Processor 3500+ (2204.71-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x50ff2 Family=0xf Model=0x5f Stepping=2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8> SVM: NAsids=64 real memory = 8589934592 (8192 MB) avail memory = 8263528448 (7880 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <Nvidia ASUSACPI> random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20201113/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20201113/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20201113/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20201113/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20201113/tbfadt-748) Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20201113/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20201113/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20201113/tbfadt-850) ioapic0 <Version 1.1> irqs 0-23 random: entropy device external interface module_register_init: MOD_LOAD (kbdmux, 0xffffffff806ef000, 0) error 6 WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0. smbios0: <System Management BIOS> at iomem 0xf13e0-0xf13fe smbios0: Version: 2.4, BCD Revision: 2.4 aesni0: No AES or SHA support. acpi0: <Nvidia ASUSACPI> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff irq 0,8 on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 950 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 16 at device 5.0 on pci0 vgapci0: Boot video device pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at device 11.0 on pci0 usbus0 on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff irq 22 at device 11.1 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0 ata2: <ATA channel> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci1: <ACPI PCI bus> on pcib1 hdac0: <NVIDIA MCP51 HDA Controller> mem 0xfe028000-0xfe02bfff irq 20 at device 16.1 on pci0 nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xdc00-0xdc07 mem 0xfe02c000-0xfe02cfff irq 21 at device 20.0 on pci0 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow nfe0: Ethernet address: [_MAC_XXXXXXXXXX] acpi_tz0: <Thermal Zone> on acpi0 aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0 aibs0: v0: 0x06020000 Vcore Voltage 1450 / 1750 aibs0: v1: 0x06020001 +3.3 Voltage 3000 / 3600 aibs0: v2: 0x06020002 +5.0 Voltage 4500 / 5500 aibs0: v3: 0x06020003 +12.0 Voltage 11200 / 13200 aibs0: t0: 0x06030000 CPU Temperature 900 / 1250 aibs0: t1: 0x06030001 MB Temperature 450 / 900 aibs0: FSIF: malformed package: 3/5, assume 5 aibs0: f0: 0x06040000 CPU FAN Speed 0 / 1800 aibs0: f1: 0x06040001 CHASSIS FAN Speed 0 / 1800 aibs0: f2: 0x06040002 POWER FAN Speed 0 / 1800 aibs0: f3: 0x06040005 CHIPSET FAN Speed 0 / 1800 aibs0: f4: 0x06040006 CHASSIS2 FAN Speed 0 / 1800 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> WARNING: Device "consolectl" is Giant locked and may be deleted before FreeBSD 15.0. sc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 powernow0: <PowerNow! K8> on cpu0 Timecounter "TSC-low" frequency 1102299039 Hz quality 800 CPU0: local APIC error 0x4 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled hdacc0: <Analog Devices AD1986A HDA CODEC> at cad 0 on hdac0 hdaa0: <Analog Devices AD1986A Audio Function Group> at nid 1 on hdacc0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 hdaa0: WARNING: nid=18 has zero cnid entnum=4 j=2 index=0 entries=8 found=2 res=0x21002211 pcm0: <Analog Devices AD1986A (Analog 2.0+HP)> at nid 27,26 on hdaa0 pcm1: <Analog Devices AD1986A (Rear Digital)> at nid 37 on hdaa0 ugen1.1: <nVidia EHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <nVidia OHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Trying to mount root from ufs:/dev/ada2s3a [rw,noatime]... Root mount waiting for: usbus0 usbus1 CAM ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD2500JB-00GVC0 08.02D08> ATA-6 device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 238475MB (488397168 512 byte sectors) ada1 at ata0 bus 0 scbus0 target 1 lun 0 ada1: <Maxtor 6Y060L0 YAR41VW0> ATA-7 device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 133.000MB/s transfers (UDMA6, PIO 8192bytes) ada1: 58644MB (120103200 512 byte sectors) ada2 at ata2 bus 0 scbus2 target 0 lun 0 ada2: <KINGSTON SEDC500M480G SCEKJ2.7> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada2: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada2: 457862MB (937703088 512 byte sectors) uhub1: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 Root mount waiting for: usbus1 uhub0: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 ugen0.2: <vendor 0x055f USB Scanner> at usbus0 lo0: link state changed to UP nfe0: link state changed to DOWN nfe0: link state changed to UP