Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-10 09:59:03
From: root
Description: FreeBSD/amd64 on PC Engines APU2
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(vga): resolution 640x480 CPU: AMD GX-412TC SOC (998.14-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x730f01 Family=0x16 Model=0x30 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> Structured Extended Features=0x8<BMI1> XSAVE Features=0x1<XSAVEOPT> SVM: NP,NRIP,AFlush,DAssist,NAsids=8 TSC: P-state invariant, performance statistics real memory = 4815060992 (4592 MB) avail memory = 4100861952 (3910 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <CORE COREBOOT> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic1: MADT APIC ID 5 != hw id 0 ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 2 3 1 random: entropy device external interface kbd0 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf4870-0xf488e smbios0: Version: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <CORE COREBOOT> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 apei0: <ACPI Platform Error Interface> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0 pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff pci1: <ACPI PCI bus> on pcib1 igb0: <Intel(R) I210 Flashless (Copper)> port 0x2000-0x201f mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff at device 0.0 on pci1 igb0: NVM V0.6 imgtype5 igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 4 RX queues 4 TX queues igb0: Using MSI-X interrupts with 5 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib2: <ACPI PCI-PCI bridge> at device 2.3 on pci0 pcib2: failed to allocate initial I/O port window: 0x2000-0x2fff pci2: <ACPI PCI bus> on pcib2 igb1: <Intel(R) I210 Flashless (Copper)> port 0x3000-0x301f mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 on pci2 igb1: NVM V0.6 imgtype5 igb1: Using 1024 TX descriptors and 1024 RX descriptors igb1: Using 4 RX queues 4 TX queues igb1: Using MSI-X interrupts with 5 vectors igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0 pcib3: failed to allocate initial I/O port window: 0x3000-0x3fff pci3: <ACPI PCI bus> on pcib3 igb2: <Intel(R) I210 Flashless (Copper)> port 0x5000-0x501f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device 0.0 on pci3 igb2: NVM V0.6 imgtype5 igb2: Using 1024 TX descriptors and 1024 RX descriptors igb2: Using 4 RX queues 4 TX queues igb2: Using MSI-X interrupts with 5 vectors igb2: Ethernet address: [_MAC_XXXXXXXXXX] igb2: netmap queues/slots: TX 4/1024, RX 4/1024 pci0: <encrypt/decrypt> at device 8.0 (no driver attached) xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb22000-0xfeb23fff at device 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0 ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb25400-0xfeb254ff at device 19.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 sdhci_pci0: <Generic SD HCI> mem 0xfeb25500-0xfeb255ff at device 20.7 on pci0 sdhci_pci0: 1 slot(s) allocated uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ns8250: UART FCR is broken uart0: console (115200,n,8,1) orm0: <ISA Option ROM> at iomem 0xef000-0xeffff pnpid ORM0000 on isa0 uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounter "TSC" frequency 998128018 Hz quality 1000 Timecounters tick every 1.000 msec ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SATA SSD SBFM01.3> ACS-4 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 28626MB (58626288 512 byte sectors) ugen0.1: <AMD XHCI root HUB> at usbus0 Trying to mount root from ufs:/dev/ada0p2 [rw]... ugen1.1: <AMD EHCI root HUB> at usbus1 uhub0 on usbus0 uhub1 on usbus1 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Dual Console: Video Primary, Serial Secondary uhub0: 4 ports with 4 removable, self powered intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 uhub1: 2 ports with 2 removable, self powered bridge0: Ethernet address: [_MAC_XXXXXXXXXX] bridge1: Ethernet address: [_MAC_XXXXXXXXXX] ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1 uhub2: 4 ports with 4 removable, self powered igb0: link state changed to UP igb1: link state changed to UP igb2: link state changed to UP igb0: changing name to 'modem' igb1: changing name to 'switch' igb2: changing name to 'mgmt' bridge0: changing name to 'wan' bridge1: changing name to 'transit' lo0: link state changed to UP modem: link state changed to DOWN switch: link state changed to DOWN switch.10: changing name to 'main' switch.99: changing name to 'nexon' switch.100: changing name to 'iot' switch.200: changing name to 'guests' switch.300: changing name to 'dmz' switch.500: changing name to 'cctv' switch.1000: changing name to 'migration' mgmt: link state changed to DOWN modem: link state changed to UP switch: link state changed to UP iot: link state changed to UP guests: link state changed to UP migration: link state changed to UP nexon: link state changed to UP cctv: link state changed to UP main: link state changed to UP dmz: link state changed to UP mgmt: link state changed to UP modem: link state changed to DOWN wan: link state changed to UP modem: promiscuous mode enabled modem: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled