Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-08-15 19:01:06
From: extrowerk
Description: Radxa Zero 3W
BSD.RD:
U-Boot 2024.10-rc2 (Aug 15 2024 - 20:05:16 +0200)
Model: Radxa ZERO 3W
DRAM: 8 GiB (effective 7.7 GiB)
PMIC: RK817 (on=0x40, off=0x00)
Core: 299 devices, 28 uclasses, devicetree: separate
MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
Loading Environment from nowhere... OK
In: serial@fe660000
Out: serial@fe660000
Err: serial@fe660000
Model: Radxa ZERO 3W
Net: No ethernet found.
Hit any key to stop autoboot: 0
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------ ----------------
Scanning global bootmeth 'efi_mgr':
Card did not respond to voltage select! : -110
No EFI system partition
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
No EFI system partition
Failed to persist EFI variables
0 efi_mgr ready (none) 0 <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Booting: mmc 1
disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 1.20
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 3054228+1248332+12713448+634064 [271894+91+707976+290174]=0x13f0f38
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.6-beta (RAMDISK) #146: Tue Aug 13 15:23:31 MDT 2024
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem = 8317743104 (7932MB)
avail mem = 7976288256 (7606MB)
random: good seed from bootblocks
mainbus0 at root: Radxa ZERO 3W
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.10
efi0: Das U-Boot rev 0x20241000
smbios0 at efi0: SMBIOS 3.7.0
smbios0: vendor U-Boot version "2024.10-rc2" date 10/01/2024
smbios0: radxa Radxa ZERO 3W
cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,AdvSIMD+HP,FP+HP,SSBS
scmi0 at mainbus0: SCMI 2.0
agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4: "interrupt-controller"
syscon0 at mainbus0: "syscon"
rkiovd0 at syscon0
syscon1 at mainbus0: "syscon"
syscon2 at mainbus0: "syscon"
syscon3 at mainbus0: "syscon"
syscon4 at mainbus0: "syscon"
syscon5 at mainbus0: "syscon"
syscon6 at mainbus0: "syscon"
rkclock0 at mainbus0: PMUCRU
rkclock1 at mainbus0: CRU
syscon7 at mainbus0: "power-management"
"power-controller" at syscon7 not configured
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "qos"
syscon26 at mainbus0: "qos"
syscon27 at mainbus0: "qos"
syscon28 at mainbus0: "qos"
syscon29 at mainbus0: "qos"
syscon30 at mainbus0: "qos"
syscon31 at mainbus0: "qos"
rkcomphy0 at mainbus0
rkusbphy0 at mainbus0: phy 0
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
"fit-images" at mainbus0 not configured
"l3-cache" at mainbus0 not configured
"opp-table-0" at mainbus0 not configured
"display-subsystem" at mainbus0 not configured
"firmware" at mainbus0 not configured
"opp-table-1" at mainbus0 not configured
"hdmi-sound" at mainbus0 not configured
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
"xin32k" at mainbus0 not configured
"sram" at mainbus0 not configured
xhci0 at mainbus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
xhci1 at mainbus0, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.00 addr 1
rkiic0 at mainbus0
iic0 at rkiic0
rkpmic0 at iic0 addr 0x20: RK817
"rockchip,rk8600" at iic0 addr 0x40 not configured
"gpu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"rga" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"dfi" at mainbus0 not configured
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma
dwmshc0 at mainbus0
dwmshc0: SDHC 4.20, 200 MHz base clock
sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
"i2s" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"watchdog" at mainbus0 not configured
com0 at mainbus0: dw16550, 64 byte fifo
com1 at mainbus0: dw16550, 64 byte fifo
com1: console
"tsadc" at mainbus0 not configured
"saradc" at mainbus0 not configured
"hdmi-con" at mainbus0 not configured
"leds" at mainbus0 not configured
"regulator-1v8-vcc" at mainbus0 not configured
"regulator-1v8-vcca" at mainbus0 not configured
"regulator-1v8-vcca-image" at mainbus0 not configured
"regulator-3v3-vcc" at mainbus0 not configured
"regulator-5v0-vcc-sys" at mainbus0 not configured
"sdio-pwrseq" at mainbus0 not configured
"binman" at mainbus0 not configured
"dmc" at mainbus0 not configured
rkrng0 at mainbus0: ver 2
"nvmem" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
sd0: 14910MB, 512 bytes/sector, 30535680 sectors
manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 1 not configured
manufacturer 0xc8a1, product 0x0082 at sdmmc1 function 2 not configured
scsibus1 at sdmmc2: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000>
sd1: 59640MB, 512 bytes/sector, 122142720 sectors
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: bad clock chip time
WARNING: CHECK AND RESET THE DATE!
cpu0: regulator not implemented
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/arm64 7.6 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') zero
DNS domain name? (e.g. 'example.com') [my.domain]
DNS nameservers? (IP address list or 'none') [none]
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no] szilard
Full name for user szilard? [szilard]
Password for user szilard? (will not echo)
Password for user szilard? (again)
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no] no
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] ?
sd0: SD/MMC, NCard, 0010 (14.6G)
sd1: Samsung, CUTB42, 0000 (58.2G)
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] sd1
Encrypt the root disk with a (p)assphrase or (k)eydisk? [no] no
Disk: sd1 Usable LBA: 16 to 122142704 [122142720 Sectors]
#: type [ start: size ]
------------------------------------------------------------------------
0: Microsoft basic data [ 64: 32768 ]
1: NetBSD [ 32832: 33554432 ]
2: 49f48d32-b10e-11dc-b99b-0019d1879648 [ 33587264: 16777216 ]
3: NetBSD [ 50364480: 67108864 ]
Use (W)hole disk or (E)dit the GPT? [whole]
Creating a msdos partition and an OpenBSD partition for rest of sd1...done.
The auto-allocated layout for sd1 is:
# size offset fstype [fsize bsize cpg]
a: 1024.0M 32832 4.2BSD 2048 16384 1 # /
b: 4889.4M 2129984 swap
c: 59640.0M 0 unused
d: 3967.5M 12143488 4.2BSD 2048 16384 1 # /tmp
e: 6332.2M 20268928 4.2BSD 2048 16384 1 # /var
f: 6309.4M 33237280 4.2BSD 2048 16384 1 # /usr
g: 1024.0M 46158912 4.2BSD 2048 16384 1 # /usr/X11R6
h: 8238.1M 48256064 4.2BSD 2048 16384 1 # /usr/local
i: 16.0M 64 MSDOS
j: 3009.9M 65127648 4.2BSD 2048 16384 1 # /usr/src
k: 6144.0M 71291872 4.2BSD 2048 16384 1 # /usr/obj
l: 18685.5M 83874784 4.2BSD 2048 16384 1 # /home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
/dev/rsd1a: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1l: 18685.5MB in 38267872 sectors of 512 bytes
93 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1d: 3967.5MB in 8125440 sectors of 512 bytes
20 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1f: 6309.4MB in 12921632 sectors of 512 bytes
32 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1g: 1024.0MB in 2097152 sectors of 512 bytes
6 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1h: 8238.1MB in 16871584 sectors of 512 bytes
41 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1k: 6144.0MB in 12582912 sectors of 512 bytes
31 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1j: 3009.9MB in 6164224 sectors of 512 bytes
15 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rsd1e: 6332.2MB in 12968352 sectors of 512 bytes
32 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
Available disks are: sd0.
Which disk do you wish to initialize? (or 'done') [done]
/dev/sd1a (0d52d29dff846554.a) on /mnt type ffs (rw, asynchronous, local)
/dev/sd1l (0d52d29dff846554.l) on /mnt/home type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd1d (0d52d29dff846554.d) on /mnt/tmp type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd1f (0d52d29dff846554.f) on /mnt/usr type ffs (rw, asynchronous, local, nodev)
/dev/sd1g (0d52d29dff846554.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous, local, nodev)
/dev/sd1h (0d52d29dff846554.h) on /mnt/usr/local type ffs (rw, asynchronous, local, nodev)
/dev/sd1k (0d52d29dff846554.k) on /mnt/usr/obj type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd1j (0d52d29dff846554.j) on /mnt/usr/src type ffs (rw, asynchronous, local, nodev, nosuid)
/dev/sd1e (0d52d29dff846554.e) on /mnt/var type ffs (rw, asynchronous, local, nodev, nosuid)
Let's install the sets!
Location of sets? (disk http nfs or 'done') [http] disk
Is the disk partition already mounted? [no]
Available disks are: sd0 sd1.
Which disk contains the install media? (or 'done') [sd0] sd0
a: 1187232 49152 4.2BSD 2048 16384 16142
i: 16384 32768 MSDOS
Available sd0 partitions are: a i.
Which sd0 partition has the install sets? (or 'done') [a] a
Pathname to the sets? (or 'done') [7.6/arm64]
Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
[X] bsd [X] base76.tgz [X] game76.tgz [X] xfont76.tgz
[X] bsd.mp [X] comp76.tgz [X] xbase76.tgz [X] xserv76.tgz
[X] bsd.rd [X] man76.tgz [X] xshare76.tgz
Set name(s)? (or 'abort' or 'done') [done]
Directory does not contain SHA256.sig. Continue without verification? [no] yes
Installing bsd 100% |**************************| 17344 KB 00:01
Installing bsd.mp 100% |**************************| 17425 KB 00:01
Installing bsd.rd 100% |**************************| 18008 KB 00:01
Installing base76.tgz 100% |**************************| 306 MB 00:49
Extracting etc.tgz 100% |**************************| 264 KB 00:00
Installing comp76.tgz 100% |**************************| 78452 KB 00:22
Installing man76.tgz 100% |**************************| 8049 KB 00:04
Installing game76.tgz 100% |**************************| 2747 KB 00:00
Installing xbase76.tgz 100% |**************************| 52028 KB 00:13
Extracting xetc.tgz 100% |**************************| 8716 00:00
Installing xshare76.tgz 100% |**************************| 4552 KB 00:04
Installing xfont76.tgz 100% |**************************| 23023 KB 00:04
Installing xserv76.tgz 100% |**************************| 15605 KB 00:03
Installing BUILDINFO 100% |**************************| 54 00:00
Location of sets? (disk http nfs or 'done') [done]
What timezone are you in? ('?' for list) [Canada/Mountain] Europe/Budapest
Saving configuration files... done.
Making all device nodes... done.
Multiprocessor machine; using bsd.mp instead of bsd.
fw_update: add none; update none
Relinking to create unique kernel... done.
CONGRATULATIONS! Your OpenBSD install has been successfully completed!
When you login to your new system the first time, please read your mail
using the 'mail' command.
Exit to (S)hell, (H)alt or (R)eboot? [reboot]
------ reboot ------
U-Boot 2024.10-rc2 (Aug 15 2024 - 20:05:16 +0200)
Model: Radxa ZERO 3W
DRAM: 8 GiB (effective 7.7 GiB)
PMIC: RK817 (on=0x40, off=0x00)
Core: 299 devices, 28 uclasses, devicetree: separate
MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
Loading Environment from nowhere... OK
In: serial@fe660000
Out: serial@fe660000
Err: serial@fe660000
Model: Radxa ZERO 3W
Net: No ethernet found.
Hit any key to stop autoboot: 0
Scanning for bootflows in all bootdevs
Seq Method State Uclass Part Name Filename
--- ----------- ------ -------- ---- ------------------------ ----------------
Scanning global bootmeth 'efi_mgr':
Card did not respond to voltage select! : -110
0 efi_mgr ready (none) 0 <NULL>
** Booting bootflow '<NULL>' with efi_mgr
Booting: mmc 1
disks: sd0* sd1
>> OpenBSD/arm64 BOOTAA64 1.20
boot> boot sd1a:/bsd
booting sd1a:/bsd: 11545200+2769512+301024+845320 [939119+91+1307304+809059]=0x8
[ using 3056352 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2024 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.6-beta (GENERIC.MP) #152: Tue Aug 13 15:00:35 MDT 2024
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 8317743104 (7932MB)
avail mem = 7976210432 (7606MB)
random: good seed from bootblocks
mainbus0 at root: Radxa ZERO 3W
psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND
efi0 at mainbus0: UEFI 2.10
efi0: Das U-Boot rev 0x20241000
smbios0 at efi0: SMBIOS 3.7.0
smbios0: vendor U-Boot version "2024.10-rc2" date 10/01/2024
smbios0: radxa Radxa ZERO 3W
cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0
cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
cpu0: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPS
cpu1 at mainbus0 mpidr 100: ARM Cortex-A55 r2p0
cpu1: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 200: ARM Cortex-A55 r2p0
cpu2: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 300: ARM Cortex-A55 r2p0
cpu3: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
scmi0 at mainbus0: SCMI 2.0
apm0 at mainbus0
agintc0 at mainbus0 mbi shift 4:4 nirq 352 nredist 4 ipi: 0, 1, 2: "interrupt-c"
syscon0 at mainbus0: "syscon"
rkiovd0 at syscon0
syscon1 at mainbus0: "syscon"
syscon2 at mainbus0: "syscon"
syscon3 at mainbus0: "syscon"
syscon4 at mainbus0: "syscon"
syscon5 at mainbus0: "syscon"
syscon6 at mainbus0: "syscon"
rkclock0 at mainbus0: PMUCRU
rkclock1 at mainbus0: CRU
syscon7 at mainbus0: "power-management"
"power-controller" at syscon7 not configured
syscon8 at mainbus0: "qos"
syscon9 at mainbus0: "qos"
syscon10 at mainbus0: "qos"
syscon11 at mainbus0: "qos"
syscon12 at mainbus0: "qos"
syscon13 at mainbus0: "qos"
syscon14 at mainbus0: "qos"
syscon15 at mainbus0: "qos"
syscon16 at mainbus0: "qos"
syscon17 at mainbus0: "qos"
syscon18 at mainbus0: "qos"
syscon19 at mainbus0: "qos"
syscon20 at mainbus0: "qos"
syscon21 at mainbus0: "qos"
syscon22 at mainbus0: "qos"
syscon23 at mainbus0: "qos"
syscon24 at mainbus0: "qos"
syscon25 at mainbus0: "qos"
syscon26 at mainbus0: "qos"
syscon27 at mainbus0: "qos"
syscon28 at mainbus0: "qos"
syscon29 at mainbus0: "qos"
syscon30 at mainbus0: "qos"
syscon31 at mainbus0: "qos"
rkcomphy0 at mainbus0
rkusbphy0 at mainbus0: phy 0
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
rkgpio4 at rkpinctrl0
"fit-images" at mainbus0 not configured
"l3-cache" at mainbus0 not configured
"opp-table-0" at mainbus0 not configured
rkdrm0 at mainbus0
drm0 at rkdrm0
"firmware" at mainbus0 not configured
"opp-table-1" at mainbus0 not configured
simpleaudio0 at mainbus0
"pmu" at mainbus0 not configured
agtimer0 at mainbus0: 24000 kHz
"xin24m" at mainbus0 not configured
"xin32k" at mainbus0 not configured
"sram" at mainbus0 not configured
xhci0 at mainbus0, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.001
xhci1 at mainbus0, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev 3.00/1.001
rkiic0 at mainbus0
iic0 at rkiic0
rkpmic0 at iic0 addr 0x20: RK817
"rockchip,rk8600" at iic0 addr 0x40 not configured
"gpu" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"rga" at mainbus0 not configured
"video-codec" at mainbus0 not configured
"iommu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"dfi" at mainbus0 not configured
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma
dwmshc0 at mainbus0
dwmshc0: SDHC 4.20, 200 MHz base clock
sdmmc2 at dwmshc0: 8-bit, sd high-speed, mmc high-speed, dma
"i2s" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"dma-controller" at mainbus0 not configured
"watchdog" at mainbus0 not configured
com0 at mainbus0: dw16550, 64 byte fifo
com1 at mainbus0: dw16550, 64 byte fifo
com1: console
rktemp0 at mainbus0
"saradc" at mainbus0 not configured
"hdmi-con" at mainbus0 not configured
gpioleds0 at mainbus0: "heartbeat"
"regulator-1v8-vcc" at mainbus0 not configured
"regulator-1v8-vcca" at mainbus0 not configured
"regulator-1v8-vcca-image" at mainbus0 not configured
"regulator-3v3-vcc" at mainbus0 not configured
"regulator-5v0-vcc-sys" at mainbus0 not configured
"sdio-pwrseq" at mainbus0 not configured
"binman" at mainbus0 not configured
"dmc" at mainbus0 not configured
rkrng0 at mainbus0: ver 2
"nvmem" at mainbus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, NCard, 0010> removable
sd0: 14910MB, 512 bytes/sector, 30535680 sectors
scsibus1 at sdmmc2: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Samsung, CUTB42, 0000>
sd1: 59640MB, 512 bytes/sector, 122142720 sectors
sdmmc1: can't enable card
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd1a (0d52d29dff846554.a) swap on sd1b dump on sd1b
cpu0: regulator not implemented
rkdrm0: no display interface ports configured
Automatic boot in progress: starting file system checks.
/dev/sd1a (0d52d29dff846554.a): file system is clean; not checking
/dev/sd1l (0d52d29dff846554.l): file system is clean; not checking
/dev/sd1d (0d52d29dff846554.d): file system is clean; not checking
/dev/sd1f (0d52d29dff846554.f): file system is clean; not checking
/dev/sd1g (0d52d29dff846554.g): file system is clean; not checking
/dev/sd1h (0d52d29dff846554.h): file system is clean; not checking
/dev/sd1k (0d52d29dff846554.k): file system is clean; not checking
/dev/sd1j (0d52d29dff846554.j): file system is clean; not checking
/dev/sd1e (0d52d29dff846554.e): file system is clean; not checking
pf enabled
starting network
reordering: ld.so libc libcrypto sshd sshd-session ssh-agent.
openssl: generating isakmpd RSA keys... done.
openssl: generating iked ECDSA keys... done.
ssh-keygen: generating new host keys: RSA ECDSA ED25519
sshd: (ED25519) SHA256:6RTHh+5m0YEPFemPRbWxM15flworTbY6A0d3m7YH6c4
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
fw_update: add none; update none
starting local daemons: cron.
Tue Aug 13 23:42:17 CEST 2024
OpenBSD/arm64 (zero.my.domain) (console)
login: root
Password:
OpenBSD 7.6-beta (GENERIC.MP) #152: Tue Aug 13 15:00:35 MDT 2024
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
You have mail.
zero#