Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-09-10 17:29:25
From: tester
Description: FreeBSD/amd64 on Micro Computer(HK) Tech Limited Venus series
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p3 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(efifb): resolution 1920x1080 CPU: 12th Gen Intel(R) Core(TM) i7-12650H (2688.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906a3 Family=0x6 Model=0x9a Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> Structured Extended Features3=0xfc18c410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0xd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 34358689792 (32767 MB) avail memory = 33039396864 (31508 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: Non-uniform topology random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 13 14 8 12 2 15 3 9 6 4 7 10 5 11 random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x43c9e000-0x43c9e01e smbios0: Version: 3.4, BCD Revision: 3.4 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20221020/dswload2-315) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20221020/dswload2-315) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS03], AE_NOT_FOUND (20221020/dswload2-315) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) Firmware Error (ACPI): Could not resolve symbol [\134_SB.PC00.TXHC.RHUB.SS04], AE_NOT_FOUND (20221020/dswload2-315) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372) acpi0: Power Button (fixed) hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 350 Event timer "HPET1" frequency 19200000 Hz quality 340 Event timer "HPET2" frequency 19200000 Hz quality 340 Event timer "HPET3" frequency 19200000 Hz quality 340 Event timer "HPET4" frequency 19200000 Hz quality 340 Event timer "HPET5" frequency 19200000 Hz quality 340 Event timer "HPET6" frequency 19200000 Hz quality 340 Event timer "HPET7" frequency 19200000 Hz quality 340 atrtc1: <AT realtime clock> on acpi0 atrtc1: Warning: Couldn't map I/O. atrtc1: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nvme0: <Generic NVMe Device> mem 0x50700000-0x50703fff at device 0.0 on pci1 xhci0: <Intel Alder Lake USB 3.2 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x50800000-0x50801fff,0x50803000-0x508030ff,0x50802000-0x508027ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci2: <ACPI PCI bus> on pcib2 igc0: <Intel(R) Ethernet Controller I226-V> mem 0x50400000-0x504fffff,0x50500000-0x50503fff at device 0.0 on pci2 igc0: Using 1024 TX descriptors and 1024 RX descriptors igc0: Using 4 RX queues 4 TX queues igc0: Using MSI-X interrupts with 5 vectors igc0: Ethernet address: [_MAC_XXXXXXXXXX] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib3: <ACPI PCI-PCI bridge> at device 29.1 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel Alder Lake-P HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) acpi_button0: <Sleep Button> on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 ns8250: UART FCR is broken ns8250: UART FCR is broken uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s atrtc0: Can't map interrupt. atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. ns8250: UART FCR is broken ns8250: UART FCR is broken uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate_intel0: <Intel Speed Shift> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 hwpstate_intel8: <Intel Speed Shift> on cpu8 hwpstate_intel9: <Intel Speed Shift> on cpu9 hwpstate_intel10: <Intel Speed Shift> on cpu10 hwpstate_intel11: <Intel Speed Shift> on cpu11 hwpstate_intel12: <Intel Speed Shift> on cpu12 hwpstate_intel13: <Intel Speed Shift> on cpu13 hwpstate_intel14: <Intel Speed Shift> on cpu14 hwpstate_intel15: <Intel Speed Shift> on cpu15 Timecounter "TSC-low" frequency 1344032064 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 nvme0: Allocated 32MB host memory buffer hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 (Analog)> at nid 33 and 18 on hdaa0 pcm1: <Realtek ALC269 (Right Analog Mic)> at nid 24 on hdaa0 nda0 at nvme0 bus 0 scbus2 target 0 lun 1 nda0: <CT4000P3SSD8 P9CR30A 2311E6BB9414> nda0: [_SERIAL_NUMBER_XXXXXXXXX] nda0: nvme version 1.4 nda0: 3815447MB (7814037168 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/141p3u3 []... GEOM_ELI: Device nda0p6.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: accelerated software uhub0: 16 ports with 16 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x214b USB2.0 HUB> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x214b USB2.0 HUB> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x214b USB2.0 HUB, class 9/0, rev 2.00/1.00, addr 2> on usbus0 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.4: <Sonix Technology Co., Ltd. USB 2.0 Camera> at usbus0 ugen0.5: <Burr-Brown from TI USB Audio CODEC> at usbus0 Root mount waiting for: usbus0 ugen0.6: <DELL DELL USB Keyboard> at usbus0 ukbd0 on uhub0 ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 5> on usbus0 kbd1 at ukbd0 ugen0.7: <PIXART USB OPTICAL MOUSE> at usbus0 Root mount waiting for: usbus0 ugen0.8: <vendor 0x8087 product 0x0032> at usbus0 GEOM_ELI: Device gpt/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: accelerated software pid 73770 (zpool) is attempting to use unsafe AIO requests - not logging anymore [drm] Got Intel graphics stolen memory base 0x4c800000, size 0x3c00000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io drmn0: could not load firmware image 'i915/adlp_dmc_ver2_16.bin' drmn0: [drm] Failed to load DMC firmware i915/adlp_dmc_ver2_16.bin. Disabling runtime power management. drmn0: [drm] Run pkg install gpu-firmware-kmod to install it lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 lkpi_iic3: <LinuxKPI I2C> on drmn0 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drmn0 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 lkpi_iic5: <LinuxKPI I2C> on drmn0 iicbus5: <Philips I2C bus> on lkpi_iic5 iic5: <I2C generic I/O> on iicbus5 lkpi_iic6: <LinuxKPI I2C> on drmn0 iicbus6: <Philips I2C bus> on lkpi_iic6 iic6: <I2C generic I/O> on iicbus6 lkpi_iic7: <LinuxKPI I2C> on drmn0 iicbus7: <Philips I2C bus> on lkpi_iic7 iic7: <I2C generic I/O> on iicbus7 lkpi_iic8: <LinuxKPI I2C> on drmn0 iicbus8: <Philips I2C bus> on lkpi_iic8 iic8: <I2C generic I/O> on iicbus8 sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! lkpi_iic9: <LinuxKPI I2C> on drm2 iicbus9: <Philips I2C bus> on lkpi_iic9 iic9: <I2C generic I/O> on iicbus9 lkpi_iic10: <LinuxKPI I2C> on drm3 iicbus10: <Philips I2C bus> on lkpi_iic10 iic10: <I2C generic I/O> on iicbus10 [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1080 width=1920 depth=32 pbase=0x4000000000 vbase=0xfffffe017ac00000 name=drmn0 id=i915drmfb flags=0x0 stride=7680 end FB_INFO uaudio0 on uhub1 uaudio0: <Burr-Brown from TI USB Audio CODEC, class 0/0, rev 1.10/1.00, addr 4> on usbus0 uaudio0: Play[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) uaudio0: Play[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. uaudio0: Play[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. uaudio0: Record[0]: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. (selected) uaudio0: Record[0]: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. uaudio0: Record[0]: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. uaudio0: Record[0]: 22050 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. uaudio0: Record[0]: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. uaudio0: Record[0]: 11025 Hz, 2 ch, 16-bit S-LE PCM format, 2x4ms buffer. uaudio0: No MIDI sequencer. pcm2 on uaudio0 uaudio0: HID volume keys found. ums0 on uhub0 ums0: <PIXART USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 6> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched FQ_CODEL loaded load_dn_sched dn_sched FQ_PIE loaded load_dn_aqm dn_aqm CODEL loaded load_dn_aqm dn_aqm PIE loaded Cuse v0.1.37 @ /dev/cuse ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001118000-0x60011180ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi1: Embedded MOF found ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) igc0: link state changed to UP lo0: link state changed to UP igc0: link state changed to DOWN igc0: link state changed to UP