Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-09-15 11:32:15
From: tingo
Description: FreeBSD/amd64 on HP HP ProDesk 405 G6 Desktop Mini PC
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.3-RELEASE-p6 GENERIC amd64 FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) VT(vga): resolution 640x480 CPU: AMD Ryzen 3 PRO 4350GE with Radeon Graphics (3493.62-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x400004<UMIP,RDPID> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 68717379584 (65534 MB) avail memory = 66103578624 (63041 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM 872E > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 1 5 7 2 6 3 4 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0x83d50000-0x83d5001e smbios0: Version: 3.2, BCD Revision: 3.2 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <HPQOEM SLIC-BPC> Firmware Error (ACPI): Failure creating named object [\134_GPE._L00], AE_ALREADY_EXISTS (20201113/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20201113/psobject-372) Firmware Error (ACPI): Could not resolve symbol [\134_SB.I2CD], AE_NOT_FOUND (20201113/dswload2-315) ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372) acpi0: Power Button (fixed) hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc620000-0xfc627fff at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AHCI SATA controller> mem 0xfc600000-0xfc61ffff at device 0.1 on pci1 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 9.0 on pci2 pci3: <PCI bus> on pcib3 pci3: <unknown> at device 0.0 (no driver attached) re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2200-0x22ff mem 0xfc511000-0xfc511fff,0xfc504000-0xfc507fff at device 0.1 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x54800000 re0: MAC rev. 0x00300000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pci3: <simple comms, UART> at device 0.2 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc513000-0xfc513fff,0xfc50c000-0xfc50ffff at device 0.4 on pci3 ehci0: USB revision is unknown. Assuming v2.0. usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pci3: <serial bus> at device 0.7 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 2.2 on pci0 pci4: <ACPI PCI bus> on pcib4 nvme0: <Generic NVMe Device> mem 0xfc400000-0xfc403fff,0xfc405000-0xfc405fff,0xfc404000-0xfc404fff at device 0.0 on pci4 pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> port 0x1000-0x10ff mem 0x10030000000-0x1003fffffff,0x10040000000-0x100401fffff,0xfc300000-0xfc37ffff at device 0.0 on pci5 hdac0: <ATI (0x1637) HDA Controller> mem 0xfc380000-0xfc383fff at device 0.1 on pci5 pci5: <encrypt/decrypt> at device 0.2 (no driver attached) xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc000000-0xfc0fffff at device 0.3 on pci5 xhci1: 64 bytes context size, 64-bit DMA usbus2 on xhci1 usbus2: 5.0Gbps Super Speed USB v3.0 xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc100000-0xfc1fffff at device 0.4 on pci5 xhci2: 64 bytes context size, 64-bit DMA usbus3 on xhci2 usbus3: 5.0Gbps Super Speed USB v3.0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_syscontainer0: <System Container> on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_syscontainer1: <System Container> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounter "TSC-low" frequency 1746718558 Hz quality 1000 Timecounters tick every 1.000 msec ugen3.1: <AMD XHCI root HUB> at usbus3 ugen1.1: <(0x10ec) EHCI root HUB> at usbus1 ugen2.1: <AMD XHCI root HUB> at usbus2 ugen0.1: <AMD XHCI root HUB> at usbus0 uhub0 on usbus3 uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 uhub1 on usbus1 uhub1: <(0x10ec) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub2 on usbus0 uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub3 on usbus2 uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 nvd0: <SK hynix BC711 HFM256GD3JX013N> NVMe namespace nvd0: 244198MB (500118192 512 byte sectors) hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 ada0: <CT2000MX500SSD1 M3CR046> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) Trying to mount root from ufs:/dev/nvd0p2 [rw]... uhub0: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub2: 14 ports with 14 removable, self powered uhub1: 3 ports with 3 removable, self powered amdsmn0: <AMD Family 17h System Management Network> on hostb0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134_SB.WMIB.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: Embedded MOF found ACPI: \134_SB.WMIV.WQZZ: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: Embedded MOF found driver bug: Unable to set devclass (class: ppc devname: (unknown)) lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP