Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-09-15 11:35:50
From: tingo
Description: FreeBSD/amd64 on ASRock BeeBox N3000
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.3-RELEASE-p6 GENERIC amd64 FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367) VT(vga): resolution 640x480 CPU: Intel(R) Celeron(R) CPU N3000 @ 1.04GHz (1040.08-MHz K8-class CPU) Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> Structured Extended Features3=0xc000000<IBPB,STIBP> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16242544640 (15490 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20201113/tbfadt-748) ioapic0 <Version 2.0> irqs 0-114 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce smbios0: Version: 2.8, BCD Revision: 2.8 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <> acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x91415000-0x914157ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel Braswell HDA Controller> mem 0x91410000-0x91413fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <network> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff irq 17 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x4c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC" frequency 1039999749 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC283 (Front Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Braswell HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Braswell Audio Function Group> at nid 1 on hdacc1 pcm1: <Intel Braswell (HDMI/DP 8ch)> at nid 5 on hdaa1 pcm2: <Intel Braswell (HDMI/DP 8ch)> at nid 6 on hdaa1 pcm3: <Intel Braswell (HDMI/DP 8ch)> at nid 7 on hdaa1 ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 ada0: <INTEL SSDMCEAC120A3 LLGi> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Trying to mount root from ufs:/dev/ada0p2 [rw]... uhub0: 13 ports with 13 removable, self powered ugen0.2: <Realtek Bluetooth Radio> at usbus0 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device Seagate BUP Slim BK (0x0bc2:0xab24) ugen0.3: <Seagate BUP Slim BK> at usbus0 umass0 on uhub0 umass0: <Seagate BUP Slim BK, class 0/0, rev 3.00/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:2:0: Attached to scbus2 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <Seagate BUP Slim BK 0304> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXX] da0: 400.000MB/s transfers da0: 1907729MB (3907029167 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ichsmb0: <Intel Braswell SMBus controller> port 0xf040-0xf05f mem 0x91414000-0x9141401f irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP ubt0 on uhub0 ubt0: <Bluetooth Radio> on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize()