Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-09-19 19:50:19
From: acambra
Description: FreeBSD/amd64 on HP ProLiant MicroServer Gen8
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p5 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E3-1220 V2 @ 3.10GHz (3093.07-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16601264128 (15832 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20221020/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm2ControlBlock: 8/32 (20221020/tbfadt-748) Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20221020/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20221020/tbfadt-850) ioapic0: MADT APIC ID 8 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 3 2 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <HP ProLiant> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 apei0: <ACPI Platform Error Interface> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xfacf0000-0xfacf03ff irq 21 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 pci0:3:0:0: error accessing writeable VPD data bge0: <, ASIC rev. 0x5720000> mem 0xfabf0000-0xfabfffff,0xfabe0000-0xfabeffff,0xfabd0000-0xfabdffff irq 16 at device 0.0 on pci4 bge0: APE FW version: NCSI v1.3.12.0 bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] pci0:3:0:1: error accessing writeable VPD data bge1: <lkpi_pcimlx5_core_pci_table0, ASIC rev. 0x5720000> mem 0xfabc0000-0xfabcffff,0xfabb0000-0xfabbffff,0xfaba0000-0xfabaffff irq 17 at device 0.1 on pci4 bge1: APE FW version: NCSI v1.3.12.0 bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E miibus1: <MII bus> on bge1 brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: [_MAC_XXXXXXXXXX] pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pci5: <ACPI PCI bus> on pcib5 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfbff0000-0xfbff1fff irq 18 at device 0.0 on pci5 xhci0: 64 bytes context size, 32-bit DMA usbus1 on xhci0 usbus1: 5.0Gbps Super Speed USB v3.0 pcib6: <ACPI PCI-PCI bridge> at device 28.7 on pci0 pci6: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbee0000-0xfbee3fff,0xfb000000-0xfb7fffff irq 16 at device 0.1 on pci6 vgapci0: Boot video device uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 on pci6 usbus2 on uhci0 usbus2: 12Mbps Full Speed USB v1.0 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xface0000-0xface03ff irq 20 at device 29.0 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci1 usbus3: 480Mbps High Speed USB v2.0 pcib7: <PCI-PCI bridge> at device 30.0 on pci0 pci7: <PCI bus> on pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0x10c0-0x10c7,0x10c8-0x10cb,0x10d0-0x10d7,0x10d8-0x10db,0x10e0-0x10ff mem 0xfacd0000-0xfacd07ff irq 17 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff pnpid ORM0000 on isa0 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1546486757 Hz quality 1000 Timecounters tick every 1.000 msec ugen3.1: <Intel EHCI root HUB> at usbus3 ugen1.1: <(0x1912) XHCI root HUB> at usbus1 ugen2.1: <HP UHCI root HUB> at usbus2 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0 on usbus3 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub1 on usbus1 uhub1: <(0x1912) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub2 on usbus2 uhub2: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub3 on usbus0 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Trying to mount root from zfs:thor/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 3815447MB (7814037168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <SanDisk SSD PLUS 480GB 42077100> ACS-4 ATA SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXXXXXX] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada4: Command Queueing enabled ada4: 457862MB (937703088 512 byte sectors) ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 ses0: ada3,pass3 in 'Slot 03', SATA Slot: scbus3 target 0 ses0: ada4,pass4 in 'Slot 04', SATA Slot: scbus4 target 0 uhub2: 2 ports with 2 removable, self powered uhub1: 6 ports with 6 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen2.2: <BMC Virtual Keyboard> at usbus2 ukbd0 on uhub2 ukbd0: <BMC Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on usbus2 kbd2 at ukbd0 ugen3.2: <vendor 0x8087 product 0x0024> at usbus3 uhub4 on uhub0 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub5 on uhub3 uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 Root mount waiting for: usbus0 usbus3 uhub4: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered ugen3.3: <vendor 0x0424 product 0x2660> at usbus3 uhub6 on uhub4 uhub6: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus3 Root mount waiting for: usbus0 usbus3 uhub6: 2 ports with 1 removable, self powered usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5591) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5591) usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device SanDisk Ultra USB 3.0 (0x0781:0x5591) ugen0.3: <SanDisk Ultra USB 3.0> at usbus0 umass0 on uhub5 umass0: <SanDisk Ultra USB 3.0, class 0/0, rev 2.10/1.00, addr 3> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:7:0: Attached to scbus7 da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <SanDisk Ultra USB 3.0 1.00> Removable Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 58680MB (120176640 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> g_dev_taste: make_dev_p() failed (gp->name=zvol/TANK/Virtual Machines/packaging, error=22) GEOM_PART: integrity check failed (zvol/TANK/vm-142-disk-1s4, BSD) GEOM_PART: integrity check failed (zvol/TANK/vm-101-disk-0s4, BSD) lo1: changing name to 'bastille0' lo0: link state changed to UP bge0: link state changed to DOWN bge0: link state changed to UP ums0 on uhub2 ums0: <BMC Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on usbus2 bastille0: link state changed to UP wg0: link state changed to UP