Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-02 06:07:46
From: chaowb
Description: FreeBSD/amd64 on BIOSTAR Group TZ590-BTC DUO
Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p5 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(efifb): resolution 800x600 CPU: Intel(R) Celeron(R) G5905 CPU @ 3.50GHz (3500.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0xa0653 Family=0x6 Model=0xa5 Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ffaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x2946687<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,INVPCID,NFPUSG,MPX,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features2=0x40000000<SGXLC> Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8080068608 (7705 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x85d70000-0x85d7001e smbios0: Version: 3.3, BCD Revision: 3.3 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 Event timer "HPET5" frequency 24000000 Hz quality 440 Event timer "HPET6" frequency 24000000 Hz quality 440 atrtc1: <AT realtime clock> on acpi0 atrtc1: Warning: Couldn't map I/O. atrtc1: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0 pci2: <ACPI PCI bus> on pcib2 nvme0: <Generic NVMe Device> mem 0x89800000-0x89803fff,0x89804000-0x89805fff at device 0.0 on pci2 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Tiger Lake-H USB 3.2 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <serial bus> at device 21.0 (no driver attached) pci0: <serial bus> at device 21.1 (no driver attached) pci0: <serial bus> at device 21.2 (no driver attached) pci0: <serial bus> at device 21.3 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0x89920000-0x89921fff,0x89923000-0x899230ff,0x89922000-0x899227ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel (0xf0c8) HDA Controller> mem 0x6001110000-0x6001113fff,0x6001000000-0x60010fffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) em0: <Intel(R) I219-V GTP(14)> mem 0x89900000-0x8991ffff at device 31.6 on pci0 em0: EEPROM V0.4-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ns8250: UART FCR is broken ns8250: UART FCR is broken uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s atrtc0: Can't map interrupt. atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate_intel0: <Intel Speed Shift> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 Timecounter "TSC-low" frequency 1752002762 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 nvme0: Allocated 64MB host memory buffer hdacc0: <Realtek (0x0867) HDA CODEC> at cad 1 on hdac0 hdaa0: <Realtek (0x0867) Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek (0x0867) (Analog 2.0+HP/2.0)> at nid 33,23 and 22,24,25 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 nda0 at nvme0 bus 0 scbus7 target 0 lun 1 nda0: <KLEVV CRAS C710 M.2 NVMe SSD 256GB VC2S038E 2023111304000036> nda0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] nda0: nvme version 1.4 nda0: 244198MB (500118192 512 byte sectors) ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device Trying to mount root from ufs:/dev/nvd0p2 [rw]... uhub0: 22 ports with 22 removable, self powered ugen0.2: <vendor 0x1bcf USB Optical Mouse> at usbus0 ugen0.3: <Logitech USB Keyboard> at usbus0 ukbd0 on uhub0 ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus0 kbd2 at ukbd0 ig4iic0: <Intel Tiger Lake-H I2C Controller-1> at device 21.0 on pci0 ig4iic0: Using MSI iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 ig4iic1: <Intel Tiger Lake-H I2C Controller-2> at device 21.1 on pci0 ig4iic1: Using MSI iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 ig4iic2: <Intel Tiger Lake-H I2C Controller-3> at device 21.2 on pci0 ig4iic2: Using MSI iicbus2: <Philips I2C bus (ACPI-hinted)> on ig4iic2 ig4iic3: <Intel Tiger Lake-H I2C Controller-4> at device 21.3 on pci0 ig4iic3: Using MSI iicbus3: <Philips I2C bus (ACPI-hinted)> on ig4iic3 ichsmb0: <Intel Tiger Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001118000-0x60011180ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi1: Embedded MOF found ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) lo0: link state changed to UP em0: link state changed to UP ums0 on uhub0 ums0: <vendor 0x1bcf USB Optical Mouse, class 0/0, rev 2.00/0.14, addr 1> on usbus0 ums0: 5 buttons and [XYZT] coordinates ID=1 uhid0 on uhub0 uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.00, addr 2> on usbus0