Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-04 17:11:27
From: normis
Description: FreeBSD/amd64 on AZW EQ
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p5 GENERIC amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(efifb): resolution 800x600 CPU: 12th Gen Intel(R) Core(TM) i3-1220P (1996.80-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906a4 Family=0x6 Model=0x9a Stepping=4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> Structured Extended Features2=0x984007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> Structured Extended Features3=0xfc18c410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 25769803776 (24576 MB) avail memory = 24695615488 (23551 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: Non-uniform topology random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 2 8 3 7 6 4 9 10 5 11 random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x45cba000-0x45cba01e smbios0: Version: 3.6, BCD Revision: 3.6 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 350 Event timer "HPET1" frequency 19200000 Hz quality 340 Event timer "HPET2" frequency 19200000 Hz quality 340 Event timer "HPET3" frequency 19200000 Hz quality 340 Event timer "HPET4" frequency 19200000 Hz quality 340 Event timer "HPET5" frequency 19200000 Hz quality 340 Event timer "HPET6" frequency 19200000 Hz quality 340 Event timer "HPET7" frequency 19200000 Hz quality 340 atrtc1: <AT realtime clock> on acpi0 atrtc1: Warning: Couldn't map I/O. atrtc1: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nvme0: <Generic NVMe Device> mem 0x50700000-0x50703fff at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 6.2 on pci0 pci2: <ACPI PCI bus> on pcib2 nvme1: <Generic NVMe Device> mem 0x50600000-0x50603fff at device 0.0 on pci2 xhci0: <Intel Alder Lake-P Thunderbolt 4 USB controller> mem 0x6001110000-0x600111ffff at device 13.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <Intel Alder Lake USB 3.2 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 xhci1: 32 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <network> at device 20.3 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x50800000-0x50801fff,0x50803000-0x508030ff,0x50802000-0x508027ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x4000-0x40ff mem 0x50504000-0x50504fff,0x50500000-0x50503fff at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pci4: <ACPI PCI bus> on pcib4 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x50404000-0x50404fff,0x50400000-0x50403fff at device 0.0 on pci4 re1: Using 1 MSI-X message re1: ASPM disabled re1: Chip rev. 0x54000000 re1: MAC rev. 0x00100000 miibus1: <MII bus> on re1 rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Using defaults for TSO: 65518/35/2048 re1: Ethernet address: [_MAC_XXXXXXXXXX] re1: netmap queues/slots: TX 1/256, RX 1/256 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel Alder Lake-P HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) acpi_button0: <Sleep Button> on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button1: <Power Button> on acpi0 ns8250: UART FCR is broken ns8250: UART FCR is broken uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s atrtc0: Can't map interrupt. atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate_intel0: <Intel Speed Shift> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 hwpstate_intel8: <Intel Speed Shift> on cpu8 hwpstate_intel9: <Intel Speed Shift> on cpu9 hwpstate_intel10: <Intel Speed Shift> on cpu10 hwpstate_intel11: <Intel Speed Shift> on cpu11 Timecounter "TSC" frequency 1996803597 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel XHCI root HUB> at usbus0 ugen1.1: <Intel XHCI root HUB> at usbus1 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 nvme0: Allocated 200MB host memory buffer nvme1: Allocated 200MB host memory buffer hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 nda0 at nvme0 bus 0 scbus2 target 0 lun 1 nda0: <WD_BLACK SN770 2TB 731100WD 24298Q400183> nda0: [_SERIAL_NUMBER_XXXXXXXXX] nda0: nvme version 1.4 nda0: 1907729MB (3907029168 512 byte sectors) nda1 at nvme1 bus 0 scbus3 target 0 lun 1 nda1: <WD_BLACK SN770 2TB 731100WD 24225P800109> nda1: [_SERIAL_NUMBER_XXXXXXXXX] nda1: nvme version 1.4 nda1: 1907729MB (3907029168 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... uhub0: 5 ports with 5 removable, self powered uhub1: 16 ports with 16 removable, self powered ugen1.2: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus1 ukbd0 on uhub1 ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 1> on usbus1 kbd1 at ukbd0 Root mount waiting for: usbus1 ugen1.3: <vendor 0x8087 product 0x0026> at usbus1 ugen1.4: <JMicron JMS567> at usbus1 umass0 on uhub1 umass0: <JMicron JMS567, class 0/0, rev 3.00/1.17, addr 3> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:4:0: Attached to scbus4 da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <Samsung SSD 860 EVO 1TB 0117> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXX] da0: 400.000MB/s transfers da0: 953869MB (1953525168 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> [drm] Got Intel graphics stolen memory base 0x4c800000, size 0x3c00000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io drmn0: successfully loaded firmware image 'i915/adlp_dmc_ver2_16.bin' lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 lkpi_iic3: <LinuxKPI I2C> on drmn0 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drmn0 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 lkpi_iic5: <LinuxKPI I2C> on drmn0 iicbus5: <Philips I2C bus> on lkpi_iic5 iic5: <I2C generic I/O> on iicbus5 lkpi_iic6: <LinuxKPI I2C> on drmn0 iicbus6: <Philips I2C bus> on lkpi_iic6 iic6: <I2C generic I/O> on iicbus6 lkpi_iic7: <LinuxKPI I2C> on drmn0 iicbus7: <Philips I2C bus> on lkpi_iic7 iic7: <I2C generic I/O> on iicbus7 lkpi_iic8: <LinuxKPI I2C> on drmn0 iicbus8: <Philips I2C bus> on lkpi_iic8 iic8: <I2C generic I/O> on iicbus8 drmn0: [drm] Finished loading DMC firmware i915/adlp_dmc_ver2_16.bin (v2.16) sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=2160 width=3840 depth=32 pbase=0x4000200000 vbase=0xfffffe0161400000 name=drmn0 id=i915drmfb flags=0x0 stride=15360 end FB_INFO Intel(R) Wireless WiFi based driver for FreeBSD iwlwifi0: <iwlwifi> mem 0x6001124000-0x6001127fff at device 20.3 on pci0 iwlwifi0: Detected crf-id 0x501, cnv-id 0x80400 wfpm id 0x80000030 iwlwifi0: PCI dev 51f0/0244, rev=0x370, rfid=0x10c000 iwlwifi0: could not load firmware image 'iwlwifi-so-a0-hr-b0-83.ucode' iwlwifi0: File size way too small! iwlwifi0: could not load firmware image 'iwlwifi-so-a0-hr-b0-82.ucode' iwlwifi0: File size way too small! iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-hr-b0-81.ucode' iwlwifi0: api flags index 2 larger than supported by driver iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version:[_IP_XXX] iwlwifi0: loaded firmware version 81.31fc9ae6.0 so-a0-hr-b0-81.ucode op_mode iwlmvm iwlwifi0: Detected Intel(R) Wi-Fi 6 AX101, REV=0x370 iwlwifi0: WRT: Invalid buffer destination: 0 iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f iwlwifi0: WFPM_AUTH_KEY_0: 0x90 iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x10 iwlwifi0: Detected RF HR1 B3, rfid=0x10c000 iwlwifi0: RFIm is deactivated, reason = 4 iwlwifi0: base HW address: [_MAC_XXXXXXXXXX] ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x600112c000-0x600112c0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi1: Embedded MOF found ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) bridge0: Ethernet address: [_MAC_XXXXXXXXXX] re0: link state changed to UP lo1: changing name to 'bastille0' re1: link state changed to DOWN lo0: link state changed to UP re0: link state changed to DOWN uhid0 on uhub1 uhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 1> on usbus1 re0: link state changed to UP